David Brownell <david-b@pacbell.net>:

Rework the "Simple Configuration Files" chapter so it's more
of a quick-start "how to set up your project" tutorial:

 - Say how to hook up the JTAG adapter.  This will help new
   users, and in any case is worth spelling out somewhere.

 - Streamline the previous rather haphazard presentation,
   filling in some missing holes along the way:

     * Suggest "project directory" structure
     * Introduce new term, "user config" file (openocd.cfg)
     * Talk about more options for openocd.cfg contents
     * ... and about creating new config files
     * Add new topic, project-specific utilities (+examples)

 - Remove too-short, yet duplicative, chapter 19

Nudge packagers a bit more strongly to send patches (including
config files) upstream.


git-svn-id: svn://svn.berlios.de/openocd/trunk@2204 b42882b7-edfa-0310-969c-e2dbd0fdcd60
__archive__
zwelch 2009-06-11 21:48:36 +00:00
parent b3edde7b7d
commit 72687f227a
1 changed files with 258 additions and 97 deletions

View File

@ -63,7 +63,7 @@ Free Documentation License''.
* Building OpenOCD:: Building OpenOCD From SVN * Building OpenOCD:: Building OpenOCD From SVN
* JTAG Hardware Dongles:: JTAG Hardware Dongles * JTAG Hardware Dongles:: JTAG Hardware Dongles
* Running:: Running OpenOCD * Running:: Running OpenOCD
* Simple Configuration Files:: Simple Configuration Files * OpenOCD Project Setup:: OpenOCD Project Setup
* Config File Guidelines:: Config File Guidelines * Config File Guidelines:: Config File Guidelines
* About JIM-Tcl:: About JIM-Tcl * About JIM-Tcl:: About JIM-Tcl
* Daemon Configuration:: Daemon Configuration * Daemon Configuration:: Daemon Configuration
@ -76,7 +76,6 @@ Free Documentation License''.
* General Commands:: General Commands * General Commands:: General Commands
* Architecture and Core Commands:: Architecture and Core Commands * Architecture and Core Commands:: Architecture and Core Commands
* JTAG Commands:: JTAG Commands * JTAG Commands:: JTAG Commands
* Sample Scripts:: Sample Target Scripts
* TFTP:: TFTP * TFTP:: TFTP
* GDB and OpenOCD:: Using GDB and OpenOCD * GDB and OpenOCD:: Using GDB and OpenOCD
* Tcl Scripting API:: Tcl Scripting API * Tcl Scripting API:: Tcl Scripting API
@ -239,6 +238,7 @@ That said, the OpenOCD developers would also like you to follow a few
suggestions: suggestions:
@enumerate @enumerate
@item @b{Send patches, including config files, upstream.}
@item @b{Always build with printer ports enabled.} @item @b{Always build with printer ports enabled.}
@item @b{Try to use LIBFTDI + LIBUSB where possible. You cover more bases.} @item @b{Try to use LIBFTDI + LIBUSB where possible. You cover more bases.}
@end enumerate @end enumerate
@ -718,28 +718,114 @@ establish a connection with the target. In general, it is possible for
the JTAG controller to be unresponsive until the target is set up the JTAG controller to be unresponsive until the target is set up
correctly via e.g. GDB monitor commands in a GDB init script. correctly via e.g. GDB monitor commands in a GDB init script.
@node Simple Configuration Files @node OpenOCD Project Setup
@chapter Simple Configuration Files @chapter OpenOCD Project Setup
@cindex configuration
@section Outline To use OpenOCD with your development projects, you need to do more than
There are 4 basic ways of ``configurating'' OpenOCD to run, they are: just connecting the JTAG adapter hardware (dongle) to your development board
and then starting the OpenOCD server.
You also need to configure that server so that it knows
about that adapter and board, and helps your work.
@section Hooking up the JTAG Adapter
Today's most common case is a dongle with a JTAG cable on one side
(such as a ribbon cable with a 10-pin or 20-pin IDC connector)
and a USB cable on the other.
Instead of USB, some cables use Ethernet;
older ones may use a PC parallel port, or even a serial port.
@enumerate @enumerate
@item A small openocd.cfg file which ``sources'' other configuration files @item @emph{Start with power to your target board turned off},
@item A monolithic openocd.cfg file and nothing connected to your JTAG adapter.
@item Many -f filename options on the command line If you're particularly paranoid, unplug power to the board.
@item Your Mixed Solution It's important to have the ground signal properly set up,
unless you are using a JTAG adapter which provides
galvanic isolation between the target board and the
debugging host.
@item @emph{Be sure it's the right kind of JTAG connector.}
If your dongle has a 20-pin ARM connector, you need some kind
of adapter (or octopus, see below) to hook it up to
boards using 14-pin or 10-pin connectors ... or to 20-pin
connectors which don't use ARM's pinout.
In the same vein, make sure the voltage levels are compatible.
Not all JTAG adapters have the level shifters needed to work
with 1.2 Volt boards.
@item @emph{Be certain the cable is properly oriented} or you might
damage your board. In most cases there are only two possible
ways to connect the cable.
Connect the JTAG cable from your adapter to the board.
Be sure it's firmly connected.
In the best case, the connector is keyed to physically
prevent you from inserting it wrong.
This is most often done using a slot on the board's male connector
housing, which must match a key on the JTAG cable's female connector.
If there's no housing, then you must look carefully and
make sure pin 1 on the cable hooks up to pin 1 on the board.
Ribbon cables are frequently all grey except for a wire on one
edge, which is red. The red wire is pin 1.
Sometimes dongles provide cables where one end is an ``octopus'' of
color coded single-wire connectors, instead of a connector block.
These are great when converting from one JTAG pinout to another,
but are tedious to set up.
Use these with connector pinout diagrams to help you match up the
adapter signals to the right board pins.
@item @emph{Connect the adapter's other end} once the JTAG cable is connected.
A USB, parallel, or serial port connector will go to the host which
you are using to run OpenOCD.
For Ethernet, consult the documentation and your network administrator.
For USB based JTAG adapters you have an easy sanity check at this point:
does the host operating system see the JTAG adapter?
@item @emph{Connect the adapter's power supply, if needed.}
This step is primarily for non-USB adapters,
but sometimes USB adapters need extra power.
@item @emph{Power up the target board.}
Unless you just let the magic smoke escape,
you're now ready to set up the OpenOCD server
so you can use JTAG to work with that board.
@end enumerate @end enumerate
@section Small configuration file method Talk with the OpenOCD server using
telnet (@code{telnet localhost 4444} on many systems) or GDB.
@xref{GDB and OpenOCD}.
This is the preferred method. It is simple and works well for many @section Project Directory
people. The developers of OpenOCD would encourage you to use this
method. If you create a new configuration please email new
configurations to the development list.
Here is an example of an openocd.cfg file for an ATMEL at91sam7x256 There are many ways you can configure OpenOCD and start it up.
A simple way to organize them all involves keeping a
single directory for your work with a given board.
When you start OpenOCD from that directory,
it searches there first for configuration files
and for code you upload to the target board.
It is also be the natural place to write files,
such as log files and data you download from the board.
@section Configuration Basics
There are two basic ways of configuring OpenOCD, and
a variety of ways you can mix them.
Think of the difference as just being how you start the server:
@itemize
@item Many @option{-f file} or @option{-c command} options on the command line
@item No options, but a @dfn{user config file}
in the current directory named @file{openocd.cfg}
@end itemize
Here is an example @file{openocd.cfg} file for a setup
using a Signalyzer FT2232-based JTAG adapter to talk to
a board with an Atmel AT91SAM7X256 microcontroller:
@example @example
source [find interface/signalyzer.cfg] source [find interface/signalyzer.cfg]
@ -751,66 +837,172 @@ gdb_flash_program enable
source [find target/sam7x256.cfg] source [find target/sam7x256.cfg]
@end example @end example
There are many example configuration scripts you can work with. You Here is the command line equivalent of that configuration:
should look in the directory: @t{$(INSTALLDIR)/lib/openocd}. You
should find:
@enumerate
@item @b{board} - eval board level configurations
@item @b{interface} - specific dongle configurations
@item @b{target} - the target chips
@item @b{tcl} - helper scripts
@item @b{xscale} - things specific to the xscale.
@end enumerate
Look first in the ``boards'' area, then the ``targets'' area. Often a board
configuration is a good example to work from.
@section Many -f filename options
Some believe this is a wonderful solution, others find it painful.
You can use a series of ``-f filename'' options on the command line,
OpenOCD will read each filename in sequence, for example:
@example @example
openocd -f file1.cfg -f file2.cfg -f file2.cfg openocd -f interface/signalyzer.cfg \
-c "gdb_memory_map enable" \
-c "gdb_flash_program enable" \
-f target/sam7x256.cfg
@end example @end example
You can also intermix various commands with the ``-c'' command line You could wrap such long command lines in shell scripts,
option. each supporting a different development task.
One might re-flash the board with specific firmware version.
Another might set up a particular debugging or run-time environment.
@section Monolithic file Here we will focus on the simpler solution: one user config
The ``Monolithic File'' dispenses with all ``source'' statements and file, including basic configuration plus any TCL procedures
puts everything in one self contained (monolithic) file. This is not to simplify your work.
encouraged.
Please try to ``source'' various files or use the multiple -f @section User Config Files
technique. @cindex config file
@cindex user config file
@section Advice for you A user configuration file ties together all the parts of a project
Often, one uses a ``mixed approach''. Where possible, please try to in one place.
``source'' common things, and if needed cut/paste parts of the One of the following will match your situation best:
standard distribution configuration files as needed.
@b{REMEMBER:} The ``important parts'' of your configuration file are: @itemize
@item Ideally almost everything comes from configuration files
provided by someone else.
For example, OpenOCD distributes a @file{scripts} directory
(probably in @file{/usr/share/openocd/scripts} on Linux);
board and tool vendors can provide these too.
The AT91SAM7X256 example above works this way.
Three main types of non-user configuration file each have their
own subdirectory in the @file{scripts} directory:
@enumerate @enumerate
@item @b{Interface} - Defines the dongle @item @b{interface} -- one for each kind of JTAG adapter/dongle
@item @b{Taps} - Defines the JTAG Taps @item @b{board} -- one for each different board
@item @b{GDB Targets} - What GDB talks to @item @b{target} -- the chips which integrate CPUs and other JTAG TAPs
@item @b{Flash Programing} - Very Helpful
@end enumerate @end enumerate
Some key things you should look at and understand are: Best case: include just two files, and they handle everything else.
The first is an interface config file.
The second is board-specific, and it sets up the JTAG TAPs and
their GDB targets (by deferring to some @file{target.cfg} file),
declares all flash memory, and leaves you nothing to do except
meet your deadline:
@enumerate @example
@item The reset configuration of your debug environment as a whole source [find interface/olimex-jtag-tiny.cfg]
@item Is there a ``work area'' that OpenOCD can use? source [find board/csb337.cfg]
@* For ARM - work areas mean up to 10x faster downloads. @end example
@item For MMU/MPU based ARM chips (i.e.: ARM9 and later) will that work area still be available?
@item For complex targets (multiple chips) the JTAG SPEED becomes an issue.
@end enumerate
Boards with a single microcontroller often won't need more
than the target config file, as in the AT91SAM7X256 example.
That's because there is no external memory (flash, DDR RAM), and
the board differences are encapsulated by application code.
@item You can often reuse some standard config files but
need to write a few new ones, probably a @file{board.cfg} file.
You will be using commands described later in this User's Guide,
and working with the guidelines in the next chapter.
For example, there may be configuration files for your JTAG adapter
and target chip, but you need a new board-specific config file
giving access to your particular flash chips.
Or you might need to write another target chip configuration file
for a new chip built around the Cortex M3 core.
@quotation Note
When you write new configuration files, please submit
them for inclusion in the next OpenOCD release.
For example, a @file{board/newboard.cfg} file will help the
next users of that board, and a @file{target/newcpu.cfg}
will help support users of any board using that chip.
@end quotation
@item
You may may need to write some C code.
It may be as simple as a supporting a new new ft2232 or parport
based dongle; a bit more involved, like a NAND or NOR flash
controller driver; or a big piece of work like supporting
a new chip architecture.
@end itemize
Reuse the existing config files when you can.
Look first in the @file{scripts/boards} area, then @file{scripts/targets}.
You may find a board configuration that's a good example to follow.
When you write config files, separate the reusable parts
(things every user of that interface, chip, or board needs)
from ones specific to your environment and debugging approach.
For example, a @code{gdb-attach} event handler that invokes
the @command{reset init} command will interfere with debugging
early boot code, which performs some of the same actions
that the @code{reset-init} event handler does.
Likewise, the @command{arm9tdmi vector_catch} command (or
its @command{xscale vector_catch} sibling) can be a timesaver
during some debug sessions, but don't make everyone use that either.
Keep those kinds of debugging aids in your user config file.
@section Project-Specific Utilities
A few project-specific utility
routines may well speed up your work.
Write them, and keep them in your project's user config file.
For example, if you are making a boot loader work on a
board, it's nice to be able to debug the ``after it's
loaded to RAM'' parts separately from the finicky early
code which sets up the DDR RAM controller and clocks.
A script like this one, or a more GDB-aware sibling,
may help:
@example
proc ramboot @{ @} @{
# Reset, running the target's "reset-init" scripts
# to initialize clocks and the DDR RAM controller.
# Leave the CPU halted.
reset init
# Load CONFIG_SKIP_LOWLEVEL_INIT version into DDR RAM.
load_image u-boot.bin 0x20000000
# Start running.
resume 0x20000000
@}
@end example
Then once that code is working you will need to make it
boot from NOR flash; a different utility would help.
Alternatively, some developers write to flash using GDB.
(You might use a similar script if you're working with a flash
based microcontroller application instead of a boot loader.)
@example
proc newboot @{ @} @{
# Reset, leaving the CPU halted. The "reset-init" event
# proc gives faster access to the CPU and to NOR flash;
# "reset halt" would be slower.
reset init
# Write standard version of U-Boot into the first two
# sectors of NOR flash ... the standard version should
# do the same lowlevel init as "reset-init".
flash protect 0 0 1 off
flash erase_sector 0 0 1
flash write_bank 0 u-boot.bin 0x0
flash protect 0 0 1 on
# Reboot from scratch using that new boot loader.
reset run
@}
@end example
You may need more complicated utility procedures when booting
from NAND.
That often involves an extra bootloader stage,
running from on-chip SRAM to perform DDR RAM setup so it can load
the main bootloader code (which won't fit into that SRAM).
Other helper scripts might be used to write production system images,
involving considerably more than just a three stage bootloader.
@node Config File Guidelines @node Config File Guidelines
@ -852,6 +1044,7 @@ setting a variable or two before sourcing the target file. Or adding
various commands specific to their situation. various commands specific to their situation.
@section Interface Config Files @section Interface Config Files
@cindex config file
The user should be able to source one of these files via a command like this: The user should be able to source one of these files via a command like this:
@ -868,6 +1061,7 @@ sole developer who created it.
Interface files should be found in @t{$(INSTALLDIR)/lib/openocd/interface} Interface files should be found in @t{$(INSTALLDIR)/lib/openocd/interface}
@section Board Config Files @section Board Config Files
@cindex config file
@b{Note: BOARD directory NEW as of 28/nov/2008} @b{Note: BOARD directory NEW as of 28/nov/2008}
@ -896,6 +1090,7 @@ In summary the board files should contain (if present)
@end enumerate @end enumerate
@section Target Config Files @section Target Config Files
@cindex config file
The user should be able to source one of these files via a command like this: The user should be able to source one of these files via a command like this:
@ -1113,13 +1308,6 @@ register to report that JTAG debugging is being done.
If the chip has a DCC, enable it. If the chip is an ARM9 with some If the chip has a DCC, enable it. If the chip is an ARM9 with some
special high speed download features - enable it. special high speed download features - enable it.
If the chip supports the @command{arm9tdmi vector_catch},
@command{xscale vector_catch}, or similar features,
consider enabling it in your user-specific configuration file.
Experience has shown the ``vector_catch'' can be
helpful for catching programming errors
like Undefined Instructions, Data Abort, and Prefetch Abort.
If present, the MMU, the MPU and the CACHE should be disabled. If present, the MMU, the MPU and the CACHE should be disabled.
Some ARM cores are equipped with trace support, which permits Some ARM cores are equipped with trace support, which permits
@ -4885,33 +5073,6 @@ that supports a packet size bigger than the default packet size (512 bytes). The
are numerous TFTP servers out there (free and commercial) and you will have to do are numerous TFTP servers out there (free and commercial) and you will have to do
a bit of googling to find something that fits your requirements. a bit of googling to find something that fits your requirements.
@node Sample Scripts
@chapter Sample Scripts
@cindex scripts
This page shows how to use the Target Library.
The configuration script can be divided into the following sections:
@itemize @bullet
@item Daemon configuration
@item Interface
@item JTAG scan chain
@item Target configuration
@item Flash configuration
@end itemize
Detailed information about each section can be found at OpenOCD configuration.
@section AT91R40008 example
@cindex AT91R40008 example
To start OpenOCD with a target script for the AT91R40008 CPU and reset
the CPU upon startup of the OpenOCD daemon.
@example
openocd -f interface/parport.cfg -f target/at91r40008.cfg \
-c "init" -c "reset"
@end example
@node GDB and OpenOCD @node GDB and OpenOCD
@chapter GDB and OpenOCD @chapter GDB and OpenOCD
@cindex GDB @cindex GDB