Add support for Hilscher netX controllers

__archive__
Michael Trensch 2010-12-16 15:33:16 +01:00 committed by Øyvind Harboe
parent c9544e411d
commit 6839618062
15 changed files with 431 additions and 9 deletions

View File

@ -64,5 +64,8 @@ ATTRS{idVendor}=="9e88", ATTRS{idProduct}=="9e8f", MODE="664", GROUP="plugdev"
ATTRS{idVendor}=="0403", ATTRS{idProduct}=="c140", MODE="664", GROUP="plugdev"
ATTRS{idVendor}=="0403", ATTRS{idProduct}=="c141", MODE="664", GROUP="plugdev"
# Hilscher NXHX Boards
ATTRS{idVendor}=="0640", ATTRS{idProduct}=="0028", MODE="664", GROUP="plugdev"
LABEL="openocd_rules_end"

View File

@ -0,0 +1,40 @@
################################################################################
# Author: Michael Trensch (MTrensch@googlemail.com)
################################################################################
source [find target/hilscher_netx500.cfg]
reset_config trst_and_srst
jtag_nsrst_delay 500
jtag_ntrst_delay 500
$_TARGETNAME configure -work-area-virt 0x1000 -work-area-phys 0x1000 -work-area-size 0x4000 -work-area-backup 1
$_TARGETNAME configure -event reset-init {
halt
arm7_9 fast_memory_access enable
arm7_9 dcc_downloads enable
sdram_fix
puts "Configuring SDRAM controller for paired K4S561632C (64MB) "
mww 0x00100140 0
mww 0x00100144 0x03C13261
mww 0x00100140 0x030D0121
puts "Configuring SRAM nCS0 for 150ns paired Par. Flash (x32)"
mww 0x00100100 0x0201000E
flash probe 0
}
#####################
# Flash configuration
#####################
#flash bank <name> <driver> <base> <size> <chip width> <bus width> <target#>
flash bank parflash cfi 0xC0000000 0x02000000 4 4 $_TARGETNAME
init
reset init

View File

@ -0,0 +1,40 @@
################################################################################
# Author: Michael Trensch (MTrensch@googlemail.com)
################################################################################
source [find target/hilscher_netx500.cfg]
reset_config trst_and_srst
jtag_nsrst_delay 500
jtag_ntrst_delay 500
$_TARGETNAME configure -work-area-virt 0x1000 -work-area-phys 0x1000 -work-area-size 0x4000 -work-area-backup 1
$_TARGETNAME configure -event reset-init {
halt
arm7_9 fast_memory_access enable
arm7_9 dcc_downloads disable
sdram_fix
puts "Configuring SDRAM controller for MT48LC8M32 (32MB) "
mww 0x00100140 0
mww 0x00100144 0x03C23251
mww 0x00100140 0x030D0111
puts "Configuring SRAM nCS0 for 150ns Par. Flash (x16)"
mww 0x00100100 0x0101000E
flash probe 0
}
#####################
# Flash configuration
#####################
#flash bank <name> <driver> <base> <size> <chip width> <bus width> <target#>
flash bank parflash cfi 0xC0000000 0x01000000 2 2 $_TARGETNAME
init
reset init

View File

@ -0,0 +1,82 @@
################################################################################
# Author: Michael Trensch (MTrensch@googlemail.com)
################################################################################
source [find target/hilscher_netx10.cfg]
# Usually it is not needed to set srst_pulls_trst
# but sometimes it does not work without it. If you encounter
# problems try to line below
# reset_config trst_and_srst srst_pulls_trst
reset_config trst_and_srst
jtag_nsrst_delay 500
jtag_ntrst_delay 500
$_TARGETNAME configure -work-area-virt 0x08000000 -work-area-phys 0x08000000 -work-area-size 0x4000 -work-area-backup 1
# Par. Flash can only be accessed if DIP switch on the board is set in proper
# position and init_sdrambus was called. Don't call these functions if the DIP
# switch is in invalid position, as some outputs may collide. This is why this
# function is not called automatically
proc flash_init { } {
puts "Configuring SRAM nCS0 for 90ns Par. Flash (x16)"
mww 0x101C0100 0x01010008
flash probe 0
}
proc mread32 {addr} {
set value(0) 0
mem2array value 32 $addr 1
return $value(0)
}
proc init_clocks { } {
puts "Enabling all clocks "
set accesskey [mread32 0x101c0070]
mww 0x101c0070 [expr $accesskey]
mww 0x101c0028 0x00007511
}
proc init_sdrambus { } {
puts "Initializing external SDRAM Bus 16 Bit "
set accesskey [mread32 0x101c0070]
mww 0x101c0070 [expr $accesskey]
mww 0x101c0C40 0x00000050
puts "Configuring SDRAM controller for K4S561632E (32MB) "
mww 0x101C0140 0
sleep 100
#mww 0x101C0144 0x00a13262
mww 0x101C0144 0x00a13251
mww 0x101C0148 0x00000033
mww 0x101C0140 0x030d0121
}
$_TARGETNAME configure -event reset-init {
halt
wait_halt 1000
arm7_9 fast_memory_access enable
arm7_9 dcc_downloads enable
init_clocks
# init_sdrambus
puts ""
puts "-------------------------------------------------"
puts "Call 'init_clocks' to enable all clocks"
puts "Call 'init_sdrambus' to enable external SDRAM bus"
puts "-------------------------------------------------"
}
#####################
# Flash configuration
#####################
#flash bank <name> <driver> <base> <size> <chip width> <bus width> <target#>
#flash bank parflash cfi 0xC0000000 0x01000000 2 2 $_TARGETNAME
init
reset init

View File

@ -0,0 +1,40 @@
################################################################################
# Author: Michael Trensch (MTrensch@googlemail.com)
################################################################################
source [find target/hilscher_netx50.cfg]
reset_config trst_and_srst
jtag_nsrst_delay 500
jtag_ntrst_delay 500
$_TARGETNAME configure -work-area-virt 0x10000000 -work-area-phys 0x10000000 -work-area-size 0x4000 -work-area-backup 1
$_TARGETNAME configure -event reset-init {
halt
arm7_9 fast_memory_access enable
arm7_9 dcc_downloads enable
sdram_fix
puts "Configuring SDRAM controller for MT48LC2M32 (8MB) "
mww 0x1C000140 0
mww 0x1C000144 0x00A12151
mww 0x1C000140 0x030D0001
puts "Configuring SRAM nCS0 for 90ns Par. Flash (x16)"
mww 0x1C000100 0x01010008
flash probe 0
}
#####################
# Flash configuration
#####################
#flash bank <name> <driver> <base> <size> <chip width> <bus width> <target#>
flash bank parflash cfi 0xC0000000 0x01000000 2 2 $_TARGETNAME
init
reset init

View File

@ -0,0 +1,42 @@
################################################################################
# Author: Michael Trensch (MTrensch@googlemail.com)
################################################################################
source [find target/hilscher_netx500.cfg]
reset_config trst_and_srst
jtag_nsrst_delay 500
jtag_ntrst_delay 500
$_TARGETNAME configure -work-area-virt 0x1000 -work-area-phys 0x1000 -work-area-size 0x4000 -work-area-backup 1
$_TARGETNAME configure -event reset-init {
halt
arm7_9 fast_memory_access enable
arm7_9 dcc_downloads enable
sleep 100
sdram_fix
puts "Configuring SDRAM controller for MT48LC2M32 (8MB) "
mww 0x00100140 0
mww 0x00100144 0x03C23251
mww 0x00100140 0x030D0001
puts "Configuring SRAM nCS0 for 90ns Par. Flash (x16)"
mww 0x00100100 0x01010008
flash probe 0
}
#####################
# Flash configuration
#####################
#flash bank <name> <driver> <base> <size> <chip width> <bus width> <target#>
flash bank parflash cfi 0xC0000000 0x01000000 2 2 $_TARGETNAME
init
reset init

View File

@ -0,0 +1,29 @@
################################################################################
# Author: Michael Trensch (MTrensch@googlemail.com)
################################################################################
source [find target/hilscher_netx500.cfg]
reset_config trst_and_srst
jtag_nsrst_delay 500
jtag_ntrst_delay 500
$_TARGETNAME configure -work-area-virt 0x1000 -work-area-phys 0x1000 -work-area-size 0x4000 -work-area-backup 1
$_TARGETNAME configure -event reset-init {
halt
arm7_9 fast_memory_access enable
arm7_9 dcc_downloads enable
sdram_fix
puts "Configuring SDRAM controller for MT48LC2M32 (8MB) "
mww 0x00100140 0
mww 0x00100144 0x03C23251
mww 0x00100140 0x030D0001
}
init
reset init

View File

@ -0,0 +1,10 @@
################################################################################
# Author: Michael Trensch (MTrensch@googlemail.com)
################################################################################
#interface
interface ft2232
ft2232_device_desc "NXHX 10-ETM"
ft2232_layout comstick
ft2232_vid_pid 0x0640 0x0028
jtag_khz 6000

View File

@ -0,0 +1,10 @@
################################################################################
# Author: Michael Trensch (MTrensch@googlemail.com)
################################################################################
#interface
interface ft2232
ft2232_device_desc "NXHX 500-ETM"
ft2232_layout comstick
ft2232_vid_pid 0x0640 0x0028
jtag_khz 6000

View File

@ -0,0 +1,10 @@
################################################################################
# Author: Michael Trensch (MTrensch@googlemail.com)
################################################################################
#interface
interface ft2232
ft2232_device_desc "NXHX 500-RE"
ft2232_layout comstick
ft2232_vid_pid 0x0640 0x0028
jtag_khz 6000

View File

@ -0,0 +1,10 @@
################################################################################
# Author: Michael Trensch (MTrensch@googlemail.com)
################################################################################
#interface
interface ft2232
ft2232_device_desc "NXHX 50-ETM"
ft2232_layout comstick
ft2232_vid_pid 0x0640 0x0028
jtag_khz 6000

View File

@ -0,0 +1,10 @@
################################################################################
# Author: Michael Trensch (MTrensch@googlemail.com)
################################################################################
#interface
interface ft2232
ft2232_device_desc "NXHX50-RE"
ft2232_layout comstick
ft2232_vid_pid 0x0640 0x0028
jtag_khz 6000

View File

@ -1,9 +1,13 @@
#Hilscher netX 500 CPU
################################################################################
# Author: Michael Trensch (MTrensch@googlemail.com)
################################################################################
#Hilscher netX 10 CPU
if { [info exists CHIPNAME] } {
set _CHIPNAME $CHIPNAME
} else {
set _CHIPNAME netx500
set _CHIPNAME netx10
}
if { [info exists ENDIAN] } {
@ -15,18 +19,13 @@ if { [info exists ENDIAN] } {
if { [info exists CPUTAPID ] } {
set _CPUTAPID $CPUTAPID
} else {
set _CPUTAPID 0x07926021
set _CPUTAPID 0x25966021
}
# FIXME most reset config belongs in board code
reset_config trst_and_srst
adapter_nsrst_delay 100
jtag_ntrst_delay 100
# jtag scan chain
jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
# that TAP is associated with a target
set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME
target create $_TARGETNAME arm966e -endian $_ENDIAN -chain-position $_TARGETNAME

View File

@ -0,0 +1,50 @@
################################################################################
# Author: Michael Trensch (MTrensch@googlemail.com)
################################################################################
#Hilscher netX 50 CPU
if { [info exists CHIPNAME] } {
set _CHIPNAME $CHIPNAME
} else {
set _CHIPNAME netx50
}
if { [info exists ENDIAN] } {
set _ENDIAN $ENDIAN
} else {
set _ENDIAN little
}
if { [info exists CPUTAPID ] } {
set _CPUTAPID $CPUTAPID
} else {
set _CPUTAPID 0x25966021
}
# jtag scan chain
jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
# that TAP is associated with a target
set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME arm966e -endian $_ENDIAN -chain-position $_TARGETNAME
# On netX50 SDRAM is not accessible at offset 0xDEAD0-0xDEADF as it is busy from
# DMA controller at init. This function will setup a dummy DMA to free this ares
# and must be called before using SDRAM
proc sdram_fix { } {
mww 0x1c005830 0x00000001
mww 0x1c005104 0xBFFFFFFC
mww 0x1c00510c 0x00480001
mww 0x1c005110 0x00000001
sleep 100
mww 0x1c00510c 0
mww 0x1c005110 0
mww 0x1c005830 0x00000000
puts "SDRAM Fix executed!"
}

View File

@ -0,0 +1,47 @@
#Hilscher netX 500 CPU
if { [info exists CHIPNAME] } {
set _CHIPNAME $CHIPNAME
} else {
set _CHIPNAME netx500
}
if { [info exists ENDIAN] } {
set _ENDIAN $ENDIAN
} else {
set _ENDIAN little
}
if { [info exists CPUTAPID ] } {
set _CPUTAPID $CPUTAPID
} else {
set _CPUTAPID 0x07926021
}
# jtag scan chain
jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
# that TAP is associated with a target
set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME
proc mread32 {addr} {
set value(0) 0
mem2array value 32 $addr 1
return $value(0)
}
# This function must be called on netX100/500 right after halt
# If it is called later the needed register cannot be written anymore
proc sdram_fix { } {
set accesskey [mread32 0x00100070]
mww 0x00100070 [expr $accesskey]
mww 0x0010002c 0x00000001
if {[expr [mread32 0x0010002c] & 0x07] == 0x07} {
puts "SDRAM Fix was not executed. Probably your CPU halted too late and the register is already locked!"
} else {
puts "SDRAM Fix succeeded!"
}
}