zcy
/
tinyriscv-openocd
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

David Brownell <david-b@pacbell.net>: 

Make startup for the various server ports be quiet, unless
debugging is active:  don't emit needless scarey messages.
Update the relevant documentation and its references:

 - For these port commands ... cover the default values;
   convert to @deffn syntax; include their use outside of
   the configuration stage; and alphabetize.

Similar updates to the rest of that small chapter:

 - Highlight that there even *IS* a configuration stage, after
   which some command functionality is no longer available.

 - For GDB commands ... convert to @deffn syntax; alphabetize;
   include a missing command (!); add missing helptext (!) for
   one non-missing command; update relevant cross-references
   and index entries.


git-svn-id: svn://svn.berlios.de/openocd/trunk@1909 b42882b7-edfa-0310-969c-e2dbd0fdcd60
__archive__
zwelch 2009-05-24 21:08:42 +00:00
parent 2e55b68360
commit 5ecae346cc
4 changed files with 108 additions and 67 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

159
doc/openocd.texi
View File

@ -686,10 +686,6 @@ Here is an example of an openocd.cfg file for an ATMEL at91sam7x256
@example
source [find interface/signalyzer.cfg]
# Change the default telnet port...
telnet_port 4444
# GDB connects here
gdb_port 3333
# GDB can also flash my flash!
gdb_memory_map enable
gdb_flash_program enable
@ -1150,11 +1146,26 @@ can type a Tcl for() loop, set variables, etc.
@node Daemon Configuration
@chapter Daemon Configuration
@cindex initialization
The commands here are commonly found in the openocd.cfg file and are
used to specify what TCP/IP ports are used, and how GDB should be
supported.
@section init
@cindex init
@section Configuration Stage
@cindex configuration stage
@cindex configuration command
When the OpenOCD server process starts up, it enters a
@emph{configuration stage} which is the only time that
certain commands, @emph{configuration commands}, may be issued.
Those configuration commands include declaration of TAPs
and other basic setup.
The server must leave the configuration stage before it
may access or activate TAPs.
After it leaves this stage, configuration commands may no
longer be issued.
@deffn {Config Command} init
This command terminates the configuration stage and
enters the normal command mode. This can be useful to add commands to
the startup scripts and commands such as resetting the target,
@ -1169,64 +1180,92 @@ configuration files and/or command line options.
@b{NOTE:} This command normally occurs at or near the end of your
openocd.cfg file to force OpenOCD to ``initialize'' and make the
targets ready. For example: If your openocd.cfg file needs to
read/write memory on your target - the init command must occur before
read/write memory on your target, @command{init} must occur before
the memory read/write commands. This includes @command{nand probe}.
@end deffn
@section TCP/IP Ports
@itemize @bullet
@item @b{telnet_port} <@var{number}>
@cindex telnet_port
@*Intended for a human. Port on which to listen for incoming telnet connections.
@cindex TCP port
@cindex server
@cindex port
The OpenOCD server accepts remote commands in several syntaxes.
Each syntax uses a different TCP/IP port, which you may specify
only during configuration (before those ports are opened).
@item @b{tcl_port} <@var{number}>
@cindex tcl_port
@*Intended as a machine interface. Port on which to listen for
incoming Tcl syntax. This port is intended as a simplified RPC
connection that can be used by clients to issue commands and get the
@deffn {Command} gdb_port (number)
@cindex GDB server
Specify or query the first port used for incoming GDB connections.
The GDB port for the
first target will be gdb_port, the second target will listen on gdb_port + 1, and so on.
When not specified during the configuration stage,
the port @var{number} defaults to 3333.
@end deffn
@deffn {Command} tcl_port (number)
Specify or query the port used for a simplified RPC
connection that can be used by clients to issue TCL commands and get the
output from the Tcl engine.
Intended as a machine interface.
When not specified during the configuration stage,
the port @var{number} defaults to 6666.
@end deffn
@item @b{gdb_port} <@var{number}>
@cindex gdb_port
@*First port on which to listen for incoming GDB connections. The GDB port for the
first target will be gdb_port, the second target will listen on gdb_port + 1, and so on.
@end itemize
@deffn {Command} telnet_port (number)
Specify or query the
port on which to listen for incoming telnet connections.
This port is intended for interaction with one human through TCL commands.
When not specified during the configuration stage,
the port @var{number} defaults to 4444.
@end deffn
@section GDB Items
@itemize @bullet
@item @b{gdb_breakpoint_override} <@var{hard|soft|disable}>
@cindex gdb_breakpoint_override
@section GDB Configuration
@anchor{GDB Configuration}
@cindex GDB
@cindex GDB configuration
You can reconfigure some GDB behaviors if needed.
The ones listed here are static and global.
@xref{Target Create}, about declaring individual targets.
@xref{Target Events}, about configuring target-specific event handling.
@deffn {Command} gdb_breakpoint_override <hard|soft|disable>
@anchor{gdb_breakpoint_override}
@*Force breakpoint type for gdb 'break' commands.
The raison d'etre for this option is to support GDB GUI's without
a hard/soft breakpoint concept where the default OpenOCD and
GDB behaviour is not sufficient. Note that GDB will use hardware
Force breakpoint type for gdb @command{break} commands.
The raison d'etre for this option is to support GDB GUI's which don't
distinguish hard versus soft breakpoints, if the default OpenOCD and
GDB behaviour is not sufficient. GDB normally uses hardware
breakpoints if the memory map has been set up for flash regions.
This option replaces older arm7_9 target commands that addressed
the same issue.
@end deffn
@item @b{gdb_detach} <@var{resume|reset|halt|nothing}>
@cindex gdb_detach
@*Configures what OpenOCD will do when GDB detaches from the daemon.
Default behaviour is <@var{resume}>
@deffn {Config command} gdb_detach <resume|reset|halt|nothing>
Configures what OpenOCD will do when GDB detaches from the daemon.
Default behaviour is @var{resume}.
@end deffn
@item @b{gdb_memory_map} <@var{enable|disable}>
@cindex gdb_memory_map
@*Set to <@var{enable}> to cause OpenOCD to send the memory configuration to GDB when
requested. GDB will then know when to set hardware breakpoints, and program flash
using the GDB load command. @option{gdb_flash_program enable} must also be enabled
for flash programming to work.
Default behaviour is <@var{enable}>
@xref{gdb_flash_program}.
@item @b{gdb_flash_program} <@var{enable|disable}>
@cindex gdb_flash_program
@deffn {Config command} gdb_flash_program <enable|disable>
@anchor{gdb_flash_program}
@*Set to <@var{enable}> to cause OpenOCD to program the flash memory when a
Set to @var{enable} to cause OpenOCD to program the flash memory when a
vFlash packet is received.
Default behaviour is <@var{enable}>
@comment END GDB Items
@end itemize
The default behaviour is @var{enable}.
@end deffn
@deffn {Config command} gdb_memory_map <enable|disable>
Set to @var{enable} to cause OpenOCD to send the memory configuration to GDB when
requested. GDB will then know when to set hardware breakpoints, and program flash
using the GDB load command. @command{gdb_flash_program enable} must also be enabled
for flash programming to work.
Default behaviour is @var{enable}.
@xref{gdb_flash_program}.
@end deffn
@deffn {Config command} gdb_report_data_abort <enable|disable>
Specifies whether data aborts cause an error to be reported
by GDB memory read packets.
The default behaviour is @var{disable};
use @var{enable} see these errors reported.
@end deffn
@node Interface - Dongle Configuration
@chapter Interface - Dongle Configuration
@ -1806,6 +1845,7 @@ enabled or disabled.
@page
@node Target Configuration
@chapter Target Configuration
@cindex GDB target
This chapter discusses how to create a GDB debug target. Before
creating a ``target'' a JTAG tap DOTTED.NAME must exist first.
@ -1945,6 +1985,8 @@ with odd reset situations and are not documented here.
@end itemize
@section Target Events
@cindex events
@anchor{Target Events}
At various times, certain things can happen, or you want them to happen.
Examples:
@ -2062,7 +2104,8 @@ jtag configure DOTTED.NAME -event tap-disable @{
@end example
@end itemize
@section target create
@section Target Create
@anchor{Target Create}
@cindex target
@cindex target creation
@ -2208,8 +2251,8 @@ via a script in some automated way. For example: To program the boot
flash on your board.
@item GDB Flashing
@* Flashing via GDB requires the flash be configured via ``flash
bank'', and the GDB flash features be enabled. See the daemon
configuration section for more details.
bank'', and the GDB flash features be enabled.
@xref{GDB Configuration}.
@end enumerate
@section Flash commands
@ -2903,8 +2946,8 @@ elsewhere) or typed manually by a human or supplied programatically,
or via one of several TCP/IP Ports.
@item @b{From the human}
@* A human should interact with the telnet interface (default port: 4444,
or via GDB, default port 3333)
@* A human should interact with the telnet interface (default port: 4444)
or via GDB (default port 3333).
To issue commands from within a GDB session, use the @option{monitor}
command, e.g. use @option{monitor poll} to issue the @option{poll}
@ -3444,7 +3487,7 @@ openocd -f interface/parport.cfg -f target/at91r40008.cfg -c init -c reset
@node GDB and OpenOCD
@chapter GDB and OpenOCD
@cindex GDB and OpenOCD
@cindex GDB
OpenOCD complies with the remote gdbserver protocol, and as such can be used
to debug remote targets.
@ -3505,7 +3548,7 @@ working area.
Informing GDB of the memory map of the target will enable GDB to protect any
flash areas of the target and use hardware breakpoints by default. This means
that the OpenOCD option @option{gdb_breakpoint_override} is not required when
that the OpenOCD option @command{gdb_breakpoint_override} is not required when
using a memory map. @xref{gdb_breakpoint_override}.
To view the configured memory map in GDB, use the GDB command @option{info mem}
@ -3517,7 +3560,7 @@ This can be changed to the old behaviour by using the following GDB command
set mem inaccessible-by-default off
@end example
If @option{gdb_flash_program enable} is also used, GDB will be able to
If @command{gdb_flash_program enable} is also used, GDB will be able to
program any flash memory using the vFlash interface.
GDB will look at the target memory map when a load command is given, if any
@ -3627,12 +3670,12 @@ Certain OpenOCD commands have been deprecated/removed during the various revisio
@*use @option{arm7_9 fast_memory_access} command with same args. @xref{arm7_9 fast_memory_access}.
@item @b{arm7_9 force_hw_bkpts}
@cindex arm7_9 force_hw_bkpts
@*Use @option{gdb_breakpoint_override} instead. Note that GDB will use hardware breakpoints
@*Use @command{gdb_breakpoint_override} instead. Note that GDB will use hardware breakpoints
for flash if the GDB memory map has been set up(default when flash is declared in
target configuration). @xref{gdb_breakpoint_override}.
@item @b{arm7_9 sw_bkpts}
@cindex arm7_9 sw_bkpts
@*On by default. See also @option{gdb_breakpoint_override}. @xref{gdb_breakpoint_override}.
@*On by default. @xref{gdb_breakpoint_override}.
@item @b{daemon_startup}
@cindex daemon_startup
@*this config option has been removed, simply adding @option{init} and @option{reset halt} to

12
src/server/gdb_server.c
View File

@ -2188,7 +2188,7 @@ int gdb_init(void)
if (gdb_port == 0 && server_use_pipes == 0)
{
LOG_WARNING("no gdb port specified, using default port 3333");
LOG_DEBUG("no gdb port specified, using default port 3333");
gdb_port = 3333;
}
@ -2369,17 +2369,15 @@ int gdb_register_commands(command_context_t *command_context)
register_command(command_context, NULL, "gdb_port", handle_gdb_port_command,
COMMAND_ANY, "daemon configuration command gdb_port");
register_command(command_context, NULL, "gdb_detach", handle_gdb_detach_command,
COMMAND_CONFIG, "");
COMMAND_CONFIG, "resume/reset/halt/nothing - "
"specify behavior when GDB detaches from the target");
register_command(command_context, NULL, "gdb_memory_map", handle_gdb_memory_map_command,
COMMAND_CONFIG, "enable or disable memory map");
register_command(command_context, NULL, "gdb_flash_program", handle_gdb_flash_program_command,
COMMAND_CONFIG, "enable or disable flash program");
register_command(command_context, NULL, "gdb_report_data_abort", handle_gdb_report_data_abort_command,
COMMAND_CONFIG, "enable or disable report data");
COMMAND_CONFIG, "enable or disable reporting data aborts");
register_command(command_context, NULL, "gdb_breakpoint_override", handle_gdb_breakpoint_override_command,
COMMAND_EXEC, "hard/soft/disable - force breakpoint type for gdb 'break' commands."
"The raison d'etre for this option is to support GDB GUI's without "
"a hard/soft breakpoint concept where the default OpenOCD behaviour "
"is not sufficient");
COMMAND_EXEC, "hard/soft/disable - force breakpoint type for gdb 'break' commands.");
return ERROR_OK;
}

2
src/server/tcl_server.c
View File

@ -165,7 +165,7 @@ int tcl_init(void)
if (tcl_port == 0)
{
LOG_WARNING("no tcl port specified, using default port 6666");
LOG_DEBUG("no tcl port specified, using default port 6666");
tcl_port = 6666;
}

2
src/server/telnet_server.c
View File

@ -596,7 +596,7 @@ int telnet_init(char *banner)
if (telnet_port == 0)
{
LOG_WARNING("no telnet port specified, using default port 4444");
LOG_DEBUG("no telnet port specified, using default port 4444");
telnet_port = 4444;
}