- fix incorrect str9comstick cfg

git-svn-id: svn://svn.berlios.de/openocd/trunk@1419 b42882b7-edfa-0310-969c-e2dbd0fdcd60

src/target/target/str9comstick.cfg

@@ -10,6 +10,17 @@ reset_config trst_and_srst
 #jtag scan chain
 #format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
 
+if { [info exists CHIPNAME] } {	
+   set  _CHIPNAME $CHIPNAME    
+} else {	 
+   set  _CHIPNAME str912
+}
+
+if { [info exists ENDIAN] } {	
+   set  _ENDIAN $ENDIAN    
+} else {	 
+   set  _ENDIAN little
+}
 
 if { [info exists FLASHTAPID ] } {
    set _FLASHTAPID $FLASHTAPID
@@ -25,7 +36,6 @@ if { [info exists CPUTAPID ] } {
 }
 jtag newtap $_CHIPNAME cpu   -irlen 4 -ircapture 0xf -irmask 0xf -expected-id $_CPUTAPID
 
-
 if { [info exists BSTAPID ] } {
    set _BSTAPID $BSTAPID
 } else {
@@ -36,7 +46,20 @@ jtag newtap $_CHIPNAME bs    -irlen 5 -ircapture 0x1 -irmask 0x1 -expected-id $_
 set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
 target create $_TARGETNAME arm966e -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm966e
 
+$_TARGETNAME configure -event reset-init {
+	# We can increase speed now that we know the target is halted.
+	#jtag_rclk 3000
+	
+	# -- Enable 96K RAM
+	# PFQBC enabled / DTCM & AHB wait-states disabled
+	mww 0x5C002034 0x0191 
+
+	str9x flash_config 0 4 2 0 0x80000
+	flash protect 0 0 7 off
+}
+
 $_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x50000000 -work-area-size 16384 -work-area-backup 0
 
 #flash bank <driver> <base> <size> <chip_width> <bus_width>
 flash bank str9x 0x00000000 0x00080000 0 0 0
+flash bank str9x 0x00080000 0x00008000 0 0 0