tcl: Setting lowlevel driver for ixo-usb-jtag

Also add further documentation about the project and how to use it.

Change-Id: Ia9878de566b3c8c1ea29f129287d5aea904d861d
Signed-off-by: Tim 'mithro' Ansell <mithro@mithis.com>
Reviewed-on: http://openocd.zylin.com/2961
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
__archive__
Tim 'mithro' Ansell 2015-09-27 20:33:59 +10:00 committed by Paul Fertser
parent d52070c855
commit 561cd67cff
1 changed files with 31 additions and 3 deletions

View File

@ -1,9 +1,37 @@
# ixo-usb-jtag - Emulation of a Altera Bus Blaster I on a Cypress FX2 IC.
# #
# Kolja Waschk's USB-JTAG # The ixo-usb-jtag firmware can be loaded onto a bunch of different hardware
# including;
# * Xilinx USB Platform Cable
# * Many Digilent boards such as the Nexys, Nexys 2 and Atlys boards
# * Many fpga4fun.com boards from such as the Saxo and Xylo boards
# * The Numato Opsis
# #
# http://www.ixo.de/info/usb_jtag/ # Original version - http://www.ixo.de/info/usb_jtag/
# Updated version - http://ixo-jtag.sourceforge.net/
# Newest version - http://github.com/mithro/ixo-usb-jtag
# #
# Procedure for using is;
# * Get the ixo-usb-jtag firmware for your hardware (or build it yourself).
# * Load the firmware using the fxload tool.
# * Use openocd.
#
# Unless you burn the firmware into the EEPROM on your device, power cycling
# will require you to reload the firmware using the fxload tool. This can be
# automated by using udev rules (which can be found in the firmware
# repository).
#
# Ubuntu packages built from mithro's version (with prebuilt firmware and udev
# rules) can be found at
# https://launchpad.net/~timvideos/+archive/ubuntu/fpga-support
#
# TODO: Refactor the usb_blaster driver to allow loading firmware using any low
# level driver. Loading firmware is currently only supported on the ublast2
# driver but ixo-usb-jtag requires the ftdi or ftd2xx driver.
interface usb_blaster interface usb_blaster
usb_blaster_vid_pid 0x16C0 0x06AD usb_blaster_vid_pid 0x16C0 0x06AD
usb_blaster_device_desc "USB-JTAG-IF" usb_blaster_device_desc "Van Ooijen Technische Informatica"
# ixo-usb-jtag is only compatible with the ublast1 protocol implemented via the
# ftdi or ftd2xx modes, using ublast2 will cause openocd to hang.
usb_blaster_lowlevel_driver ftdi