zcy
/
tinyriscv-openocd
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

flash/str7x: After reset init the flash is unlocked 

The default state of the STR7 flash after a reset init is unlocked.
The information in the flash driver now reflects this.

The information about the lock status cannot be read from the
flash chip, so the user is informed that flash info might not
contain accurate information.

[dbrownell@users.sourceforge.net: line length shrinkage]

Signed-off-by: Edgar Grimberg <edgar.grimberg@zylin.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
__archive__
Edgar Grimberg 2010-02-02 10:39:52 +01:00 committed by David Brownell
parent 3d2d5dcc9c
commit 503f6139c7
2 changed files with 23 additions and 3 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

16
src/flash/nor/str7x.c
View File

@ -93,7 +93,10 @@ static int str7x_build_block_list(struct flash_bank *bank)
bank->sectors[num_sectors].offset = mem_layout_str7bank0[i].sector_start;
bank->sectors[num_sectors].size = mem_layout_str7bank0[i].sector_size;
bank->sectors[num_sectors].is_erased = -1;
bank->sectors[num_sectors].is_protected = 1;
/* the reset_init handler marks all the sectors unprotected,
* matching hardware after reset; keep the driver in sync
*/
bank->sectors[num_sectors].is_protected = 0;
str7x_info->sector_bits[num_sectors++] = mem_layout_str7bank0[i].sector_bit;
}
@ -102,7 +105,10 @@ static int str7x_build_block_list(struct flash_bank *bank)
bank->sectors[num_sectors].offset = mem_layout_str7bank1[i].sector_start;
bank->sectors[num_sectors].size = mem_layout_str7bank1[i].sector_size;
bank->sectors[num_sectors].is_erased = -1;
bank->sectors[num_sectors].is_protected = 1;
/* the reset_init handler marks all the sectors unprotected,
* matching hardware after reset; keep the driver in sync
*/
bank->sectors[num_sectors].is_protected = 0;
str7x_info->sector_bits[num_sectors++] = mem_layout_str7bank1[i].sector_bit;
}
@ -600,6 +606,12 @@ COMMAND_HANDLER(str7x_handle_part_id_command)
static int str7x_info(struct flash_bank *bank, char *buf, int buf_size)
{
snprintf(buf, buf_size, "str7x flash driver info");
/* STR7x flash doesn't support sector protection interrogation.
* FLASH_NVWPAR acts as a write only register; its read value
* doesn't reflect the actual protection state of the sectors.
*/
LOG_WARNING("STR7x flash lock information might not be correct "
"due to hardware limitations.");
return ERROR_OK;
}

10
tcl/target/str710.cfg
View File

@ -30,7 +30,15 @@ set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi
$_TARGETNAME configure -event reset-start { jtag_khz 10 }
$_TARGETNAME configure -event reset-init { jtag_khz 6000 }
$_TARGETNAME configure -event reset-init {
jtag_khz 6000
# Because the hardware cannot be interrogated for the protection state
# of sectors, initialize all the sectors to be unprotected. The initial
# state is reflected by the driver, too.
flash protect 0 0 last off
flash protect 1 0 last off
}
$_TARGETNAME configure -event gdb-flash-erase-start {
flash protect 0 0 7 off
flash protect 1 0 1 off