zcy
/
tinyriscv-openocd
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

armv7m: always set xPSR.T=1 when starting an algorithm 

xPSR.T sets the processor to Thumb mode when set to 1. ARMv7-M only
supports execution of Thumb instructions, so it must always be set to 1.

If xPSR.T is set to 0 on armv7m, a usage fault is generated when a
instruction execution is attempted.

On armv7m, issuing a reset causes the vector table to be examined. PC
and xPSR.T  are loaded from the vector table at byte offset 4. xPSR.T is
taken from the least significant bit this value, PC from the remaining
bits.  This occurs even with `reset halt`, as the reset itself causes
this load to occur without the execution of any instructions.

As a result of this, following a reset with a "bad" value programmed in
the vector table, openocd would be unable to run algorithms on the
target, as running them would immediately result in a usage fault due to
xPSR.T being unset (0).

Allow algorithms to run regardless of the content of the vector table by
explicitly setting xPSR so that xPSR.T=1 prior to executing an
algorithm. One can think of this as openocd more closely emulating a
reset or branch instruction in executing it's algorithms.

Ticket: https://sourceforge.net/p/openocd/tickets/203/
Signed-off-by: Cody P Schafer <openocd@codyps.com>
Change-Id: I4dc3427ab195d06c3fd780ea768027fefccc4c28
Reviewed-on: http://openocd.zylin.com/4658
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
log_output
Cody P Schafer 2018-08-27 10:50:46 -04:00 committed by Tomas Vanek
parent 5fd1cb0e5b
commit 49bd64347a
1 changed files with 17 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

17
src/target/armv7m.c
View File

@ -407,6 +407,23 @@ int armv7m_start_algorithm(struct target *target,
armv7m_set_core_reg(reg, reg_params[i].value);
}
{
/*
* Ensure xPSR.T is set to avoid trying to run things in arm
* (non-thumb) mode, which armv7m does not support.
*
* We do this by setting the entirety of xPSR, which should
* remove all the unknowns about xPSR state.
*
* Because xPSR.T is populated on reset from the vector table,
* it might be 0 if the vector table has "bad" data in it.
*/
struct reg *reg = &armv7m->arm.core_cache->reg_list[ARMV7M_xPSR];
buf_set_u32(reg->value, 0, 32, 0x01000000);
reg->valid = 1;
reg->dirty = 1;
}
if (armv7m_algorithm_info->core_mode != ARM_MODE_ANY &&
armv7m_algorithm_info->core_mode != core_mode) {