cfg: add board and target configs for TI SimpleLink Wi-Fi CC3200 LaunchPad

Change-Id: I4396ee737c1dad380aa23894bbd1faf75f26d072
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/2465
Tested-by: jenkins
__archive__
Paul Fertser 2015-01-16 12:17:40 +03:00
parent be97da76ab
commit 40d6e88268
4 changed files with 89 additions and 0 deletions

View File

@ -50,6 +50,9 @@ ATTRS{idVendor}=="0403", ATTRS{idProduct}=="c141", MODE="664", GROUP="plugdev"
# Amontec JTAGkey and JTAGkey-tiny
ATTRS{idVendor}=="0403", ATTRS{idProduct}=="cff8", MODE="664", GROUP="plugdev"
# TI ICDI
ATTRS{idVendor}=="0451", ATTRS{idProduct}=="c32a", MODE="664", GROUP="plugdev"
# STLink v1
ATTRS{idVendor}=="0483", ATTRS{idProduct}=="3744", MODE="664", GROUP="plugdev"

View File

@ -0,0 +1,18 @@
#
# TI SimpleLink Wi-Fi CC3200 LaunchPad
#
# http://www.ti.com/tool/cc3200-launchxl
#
source [find interface/ftdi/ti-icdi.cfg]
if { [info exists TRANSPORT] } {
transport select $TRANSPORT
} else {
transport select jtag
}
set WORKAREASIZE 0x40000
source [find target/cc32xx.cfg]
reset_config srst_only

View File

@ -0,0 +1,15 @@
#
# This is an FTDI-based debugging solution as found on some TI boards,
# e.g. CC3200 LaunchPad.
#
# The schematics are identical to luminary-icdi (including SWD
# support) but the USB IDs are different.
#
interface ftdi
ftdi_vid_pid 0x0451 0xc32a
ftdi_layout_init 0x00a8 0x00eb
ftdi_layout_signal nSRST -noe 0x0020
ftdi_layout_signal SWD_EN -ndata 0x0080
ftdi_layout_signal SWDIO_OE -data 0x0008

53
tcl/target/cc32xx.cfg Executable file
View File

@ -0,0 +1,53 @@
# Config for Texas Instruments SoC CC32xx family
source [find target/swj-dp.tcl]
adapter_khz 100
source [find target/icepick.cfg]
if { [info exists CHIPNAME] } {
set _CHIPNAME $CHIPNAME
} else {
set _CHIPNAME cc32xx
}
#
# Main DAP
#
if { [info exists DAP_TAPID] } {
set _DAP_TAPID $DAP_TAPID
} else {
if {[using_jtag]} {
set _DAP_TAPID 0x4BA00477
} else {
set _DAP_TAPID 0x2BA01477
}
}
if {[using_jtag]} {
jtag newtap $_CHIPNAME dap -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_DAP_TAPID -disable
jtag configure $_CHIPNAME.dap -event tap-enable "icepick_c_tapenable $_CHIPNAME.jrc 0"
} else {
swj_newdap $_CHIPNAME dap -expected-id $_DAP_TAPID
}
#
# ICEpick-C (JTAG route controller)
#
if { [info exists JRC_TAPID] } {
set _JRC_TAPID $JRC_TAPID
} else {
set _JRC_TAPID 0x0B97C02F
}
if {[using_jtag]} {
jtag newtap $_CHIPNAME jrc -irlen 6 -ircapture 0x1 -irmask 0x3f -expected-id $_JRC_TAPID -ignore-version
jtag configure $_CHIPNAME.jrc -event setup "jtag tapenable $_CHIPNAME.dap"
}
#
# Cortex M3 target
#
set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME cortex_m -chain-position $_CHIPNAME.dap