zcy
/
tinyriscv-openocd
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

"reset" without arguments now execute a "reset run". 

the reset mode argument to the target command is deprecated(ignored w/error message).

git-svn-id: svn://svn.berlios.de/openocd/trunk@832 b42882b7-edfa-0310-969c-e2dbd0fdcd60
__archive__
oharboe 2008-07-18 14:43:29 +00:00
parent 2c3f0ebae9
commit 35e84a2a25
2 changed files with 27 additions and 38 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

30
doc/openocd.texi
View File

@ -516,7 +516,7 @@ Currently, there are no options available for the ep93xx interface.
@section Target configuration
@itemize @bullet
@item @b{target} <@var{type}> <@var{endianess}> <@var{reset_mode}> <@var{JTAG pos}>
@item @b{target} <@var{type}> <@var{endianess}> <@var{JTAG pos}>
<@var{variant}>
@cindex target
Defines a target that should be debugged. Currently supported types are:
@ -538,29 +538,6 @@ target board
Endianess may be @option{little} or @option{big}.
The reset_mode specifies what should happen to the target when a reset occurs:
@itemize @minus
@item @b{reset_halt}
@cindex reset_halt
Immediately request a target halt after reset. This allows targets to be debugged
from the very first instruction. This is only possible with targets and JTAG
interfaces that correctly implement the reset signals.
@item @b{reset_init}
@cindex reset_init
Similar to @option{reset_halt}, but executes the script file defined to handle the
'reset' event for the target. Like @option{reset_halt} this only works with
correct reset implementations.
@item @b{reset_run}
@cindex reset_run
Simply let the target run after a reset.
@item @b{run_and_halt}
@cindex run_and_halt
Let the target run for some time (default: 1s), and then request halt.
@item @b{run_and_init}
@cindex run_and_init
A combination of @option{reset_init} and @option{run_and_halt}. The target is allowed
to run for some time, then halted, and the @option{reset} event script is executed.
@end itemize
On JTAG interfaces / targets where system reset and test-logic reset can't be driven
completely independent (like the LPC2000 series), or where the JTAG interface is
@ -591,7 +568,7 @@ a working_area that doesn't need to be backed up, as performing a backup slows d
@subsection arm7tdmi options
@cindex arm7tdmi options
target arm7tdmi <@var{endianess}> <@var{reset_mode}> <@var{jtag#}>
target arm7tdmi <@var{endianess}> <@var{jtag#}>
The arm7tdmi target definition requires at least one additional argument, specifying
the position of the target in the JTAG daisy-chain. The first JTAG device is number 0.
The optional [@var{variant}] parameter has been removed in recent versions.
@ -829,12 +806,15 @@ OpenOCD will wait 5 seconds for the target to resume.
@cindex step
Single-step the target at its current code position, or at an optional address.
@item @b{reset} [@option{run}|@option{halt}|@option{init}|@option{run_and_halt}
|@option{run_and_init}]
@cindex reset
Perform a hard-reset. The optional parameter specifies what should happen after the reset.
This optional parameter overrides the setting specified in the configuration file,
making the new behaviour the default for the @option{reset} command.
With no arguments a "reset run" is executed
@itemize @minus
@item @b{run}
@cindex reset run

35
src/target/target.c
View File

@ -302,6 +302,8 @@ int target_process_reset(struct command_context_s *cmd_ctx)
if ((retval = jtag_init_reset(cmd_ctx)) != ERROR_OK)
return retval;
keep_alive(); /* we might be running on a very slow JTAG clk */
/* First time this is executed after launching OpenOCD, it will read out
* the type of CPU, etc. and init Embedded ICE registers in host
* memory.
@ -315,6 +317,8 @@ int target_process_reset(struct command_context_s *cmd_ctx)
if ((retval = target_examine(cmd_ctx)) != ERROR_OK)
return retval;
keep_alive(); /* we might be running on a very slow JTAG clk */
/* prepare reset_halt where necessary */
target = targets;
while (target)
@ -949,6 +953,7 @@ int target_register_commands(struct command_context_s *cmd_ctx)
register_command(cmd_ctx, NULL, "virt2phys", handle_virt2phys_command, COMMAND_ANY, "virt2phys <virtual address>");
register_command(cmd_ctx, NULL, "profile", handle_profile_command, COMMAND_EXEC, "PRELIMINARY! - profile <seconds> <gmon.out>");
/* script procedures */
register_jim(cmd_ctx, "openocd_mem2array", jim_mem2array, "read memory and return as a TCL array for script processing");
register_jim(cmd_ctx, "openocd_array2mem", jim_array2mem, "convert a TCL array to memory locations and write the values");
@ -1413,18 +1418,26 @@ int handle_target_command(struct command_context_s *cmd_ctx, char *cmd, char **a
return ERROR_COMMAND_SYNTAX_ERROR;
}
/* what to do on a target reset */
(*last_target_p)->reset_mode = RESET_INIT; /* default */
if (strcmp(args[2], "reset_halt") == 0)
(*last_target_p)->reset_mode = RESET_HALT;
{
LOG_WARNING("reset_mode argument is deprecated. reset_mode = reset_run");
}
else if (strcmp(args[2], "reset_run") == 0)
(*last_target_p)->reset_mode = RESET_RUN;
{
LOG_WARNING("reset_mode argument is deprecated. reset_mode = reset_run");
}
else if (strcmp(args[2], "reset_init") == 0)
(*last_target_p)->reset_mode = RESET_INIT;
{
LOG_WARNING("reset_mode argument is deprecated. reset_mode = reset_run");
}
else if (strcmp(args[2], "run_and_halt") == 0)
(*last_target_p)->reset_mode = RESET_RUN_AND_HALT;
{
LOG_WARNING("reset_mode argument is deprecated. reset_mode = reset_run");
}
else if (strcmp(args[2], "run_and_init") == 0)
(*last_target_p)->reset_mode = RESET_RUN_AND_INIT;
{
LOG_WARNING("reset_mode argument is deprecated. reset_mode = reset_run");
}
else
{
/* Kludge! we want to make this reset arg optional while remaining compatible! */
@ -1800,8 +1813,7 @@ int handle_soft_reset_halt_command(struct command_context_s *cmd_ctx, char *cmd,
int handle_reset_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
{
target_t *target = get_current_target(cmd_ctx);
enum target_reset_mode reset_mode = target->reset_mode;
enum target_reset_mode save = target->reset_mode;
enum target_reset_mode reset_mode = RESET_RUN;
LOG_DEBUG("-");
@ -1842,9 +1854,6 @@ int handle_reset_command(struct command_context_s *cmd_ctx, char *cmd, char **ar
/* reset *all* targets */
target_process_reset(cmd_ctx);
/* Restore default reset mode for this target */
target->reset_mode = save;
return ERROR_OK;
}
@ -2862,7 +2871,7 @@ static int jim_array2mem(Jim_Interp *interp, int argc, Jim_Obj *const *argv)
u32 v;
const char *varname;
u8 buffer[4096];
int i, n, e, retval;
int i, n, e, retval;
/* argv[1] = name of array to get the data
* argv[2] = desired width