From 35b3c95299a97c05078f7dd662d66c89a356869d Mon Sep 17 00:00:00 2001
From: oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>
Date: Fri, 4 Apr 2008 13:47:38 +0000
Subject: [PATCH] - reverted some of the changes that possibly broke arm926ejs.
 Waiting for a bit more info before I can tell with confidence whether or not
 this would have any effect. - worked on error propagation and output for
 flash

git-svn-id: svn://svn.berlios.de/openocd/trunk@539 b42882b7-edfa-0310-969c-e2dbd0fdcd60
---
 src/flash/ecos.c                |   7 ++---
 src/flash/flash.c               |  18 ++++++------
 src/helper/command.c            |  10 ++++++-
 src/helper/command.h            |  14 ++++++++++
 src/target/Makefile.am          |   3 +-
 src/target/arm11.c              |   4 +--
 src/target/arm7_9_common.c      |  47 ++++++++++++++++++++++----------
 src/target/cortex_m3.c          |   2 +-
 src/target/ecos/at91eb40a.elf   | Bin 0 -> 36832 bytes
 src/target/target.c             |   9 +++---
 src/target/target/at91eb40a.cfg |   4 ++-
 src/target/target/zy1000.cfg    |   3 +-
 src/target/xscale.c             |   2 +-
 13 files changed, 81 insertions(+), 42 deletions(-)
 create mode 100644 src/target/ecos/at91eb40a.elf

diff --git a/src/flash/ecos.c b/src/flash/ecos.c
index f467b74d8..8b64b2d71 100644
--- a/src/flash/ecos.c
+++ b/src/flash/ecos.c
@@ -211,10 +211,9 @@ int loadDriver(ecosflash_flash_bank_t *info)
 		int retval;
 		if ((retval = image_read_section(&image, i, 0x0, image.sections[i].size, buffer, &buf_cnt)) != ERROR_OK)
 		{
-			LOG_ERROR("image_read_section failed with error code: %i", retval);
 			free(buffer);
 			image_close(&image);
-			return ERROR_FLASH_BANK_INVALID;
+			return retval;
 		}
 		target_write_buffer(target, image.sections[i].base_address, buf_cnt, buffer);
 		image_size += buf_cnt;
@@ -303,7 +302,7 @@ int eCosBoard_erase(ecosflash_flash_bank_t *info, u32 address, u32 len)
 	if (flashErr != 0x0)
 	{
 		LOG_ERROR("Flash erase failed with %d (%s)\n", flashErr, flash_errmsg(flashErr));
-		return ERROR_JTAG_DEVICE_ERROR;
+		return ERROR_FAIL;
 	}
 
 	return ERROR_OK;
@@ -362,7 +361,7 @@ int eCosBoard_flash(ecosflash_flash_bank_t *info, void *data, u32 address, u32 l
 		if (flashErr != 0x0)
 		{
 			LOG_ERROR("Flash prog failed with %d (%s)\n", flashErr, flash_errmsg(flashErr));
-			return ERROR_JTAG_DEVICE_ERROR;
+			return ERROR_FAIL;
 		}
     }
 	return ERROR_OK;
diff --git a/src/flash/flash.c b/src/flash/flash.c
index 960772583..850dcd4cb 100644
--- a/src/flash/flash.c
+++ b/src/flash/flash.c
@@ -618,13 +618,12 @@ int handle_flash_write_image_command(struct command_context_s *cmd_ctx, char *cm
 	if (argc < 1)
 	{
 		return ERROR_COMMAND_SYNTAX_ERROR;
-
 	}
 
 	if (!target)
 	{
 		LOG_ERROR("no target selected");
-		return ERROR_OK;
+		return ERROR_FAIL;
 	}
 
 	duration_start_measure(&duration);
@@ -649,7 +648,6 @@ int handle_flash_write_image_command(struct command_context_s *cmd_ctx, char *cm
 	}
 
 	retval = flash_write(target, &image, &written, auto_erase);
-
 	if (retval != ERROR_OK)
 	{
 		image_close(&image);
@@ -659,9 +657,9 @@ int handle_flash_write_image_command(struct command_context_s *cmd_ctx, char *cm
 	duration_stop_measure(&duration, &duration_text);
 	if (retval == ERROR_OK)
 	{
-	command_print(cmd_ctx, "wrote %u byte from file %s in %s (%f kb/s)",
-		written, args[0], duration_text,
-		(float)written / 1024.0 / ((float)duration.duration.tv_sec + ((float)duration.duration.tv_usec / 1000000.0)));
+		command_print(cmd_ctx, "wrote %u byte from file %s in %s (%f kb/s)",
+				written, args[0], duration_text,
+				(float)written / 1024.0 / ((float)duration.duration.tv_sec + ((float)duration.duration.tv_usec / 1000000.0)));
 	}
 	free(duration_text);
 
@@ -923,7 +921,7 @@ int flash_erase_address_range(target_t *target, u32 addr, u32 length)
 /* write (optional verify) an image to flash memory of the given target */
 int flash_write(target_t *target, image_t *image, u32 *written, int erase)
 {
-	int retval;
+	int retval=ERROR_OK;
 
 	int section;
 	u32 section_offset;
@@ -1039,14 +1037,14 @@ int flash_write(target_t *target, image_t *image, u32 *written, int erase)
 
 		if (retval != ERROR_OK)
 		{
-				return retval; /* abort operation */
-			}
+			return retval; /* abort operation */
+		}
 
 		if (written != NULL)
 			*written += run_size; /* add run size to total written counter */
 	}
 
-	return ERROR_OK;
+	return retval;
 }
 
 int handle_flash_auto_erase_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
diff --git a/src/helper/command.c b/src/helper/command.c
index 7d24d81d9..ef5673336 100644
--- a/src/helper/command.c
+++ b/src/helper/command.c
@@ -298,6 +298,7 @@ void command_print(command_context_t *context, char *format, ...)
 int find_and_run_command(command_context_t *context, command_t *commands, char *words[], int num_words, int start_word)
 {
 	command_t *c;
+	int retval = ERROR_COMMAND_SYNTAX_ERROR;
 	
 	if (unique_length_dirty)
 	{
@@ -321,6 +322,7 @@ int find_and_run_command(command_context_t *context, command_t *commands, char *
 				if (!c->handler)
 				{
 					command_print(context, "No handler for command");
+					retval = ERROR_COMMAND_SYNTAX_ERROR;
 					break;
 				}
 				else
@@ -330,6 +332,12 @@ int find_and_run_command(command_context_t *context, command_t *commands, char *
 					{
 						command_print(context, "Syntax error:");
 						command_print_help_line(context, c, 0);
+					} else if (retval != ERROR_OK)
+					{
+						/* we do not print out an error message because the command *should*
+						 * have printed out an error
+						 */
+						LOG_DEBUG("Command failed with error code %d", retval); 
 					}
 					return retval; 
 				}
@@ -347,7 +355,7 @@ int find_and_run_command(command_context_t *context, command_t *commands, char *
 	}
 	
 	command_print(context, "Command %s not found", words[start_word]);
-	return ERROR_OK;
+	return retval;
 }
 
 int command_run_line(command_context_t *context, char *line)
diff --git a/src/helper/command.h b/src/helper/command.h
index 3acb8b182..6e6af75eb 100644
--- a/src/helper/command.h
+++ b/src/helper/command.h
@@ -34,6 +34,20 @@ typedef struct command_context_s
 	enum command_mode mode;
 	struct command_s *commands;
 	int current_target;
+	/* Execute a command.
+	 * 
+	 * If the command fails, it *MUST* return a value != ERROR_OK
+	 * (many commands break this rule, patches welcome!)
+	 * 
+	 * This is *especially* important for commands such as writing
+	 * to flash or verifying memory. The reason is that those commands
+	 * can be used by programs to determine if the operation succeded
+	 * or not. If the operation failed, then a program can try
+	 * an alternative approach.
+	 * 
+	 * Returning ERROR_COMMAND_SYNTAX_ERROR will have the effect of
+	 * printing out the syntax of the command.
+	 */
 	int (*output_handler)(struct command_context_s *context, char* line);
 	void *output_handler_priv;
 } command_context_t;
diff --git a/src/target/Makefile.am b/src/target/Makefile.am
index 83379381c..3f0035258 100644
--- a/src/target/Makefile.am
+++ b/src/target/Makefile.am
@@ -23,7 +23,8 @@ nobase_dist_pkglib_DATA = xscale/debug_handler.bin event/at91eb40a_reset.script
 	target/at91r40008.cfg target/lpc2148.cfg target/lpc2294.cfg target/sam7s256.cfg \
 	target/sam7x256.cfg target/str710.cfg target/str912.cfg target/nslu2.cfg target/pxa255_sst.cfg \
 	target/pxa255.cfg  target/zy1000.cfg event/zy1000_reset.script event/at91sam9260_reset.script target/at91sam9260.cfg \
-	target/wi-9c.cfg event/wi-9c_reset.script event/pxa255_reset.script target/stm32.cfg target/xba_revA3.cfg event/xba_revA3.script
+	target/wi-9c.cfg event/wi-9c_reset.script event/pxa255_reset.script target/stm32.cfg  target/xba_revA3.cfg event/xba_revA3.script \
+	ecos/at91eb40a.elf
 	
 
 
diff --git a/src/target/arm11.c b/src/target/arm11.c
index adcbe7491..ea88d5c0b 100644
--- a/src/target/arm11.c
+++ b/src/target/arm11.c
@@ -732,8 +732,8 @@ int arm11_halt(struct target_s *target)
 
     if (target->state == TARGET_HALTED)
     {
-	LOG_WARNING("target was already halted");
-	return ERROR_OK;
+		LOG_DEBUG("target was already halted");
+		return ERROR_OK;
     }
 
     if (arm11->trst_active)
diff --git a/src/target/arm7_9_common.c b/src/target/arm7_9_common.c
index 63767ae30..4e14497de 100644
--- a/src/target/arm7_9_common.c
+++ b/src/target/arm7_9_common.c
@@ -733,8 +733,18 @@ int arm7_9_poll(target_t *target)
 	return ERROR_OK;
 }
 
+/*
+  Some -S targets (ARM966E-S in the STR912 isn't affected, ARM926EJ-S
+  in the LPC3180 and AT91SAM9260 is affected) completely stop the JTAG clock
+  while the core is held in reset. It isn't possible to program the halt
+  condition once reset was asserted, hence a hook that allows the target to set
+  up its reset-halt condition prior to asserting reset.
+*/
+
 int arm7_9_assert_reset(target_t *target)
 {
+	armv4_5_common_t *armv4_5 = target->arch_info;
+	arm7_9_common_t *arm7_9 = armv4_5->arch_info;
 	LOG_DEBUG("target->state: %s", target_state_strings[target->state]);
 	
 	if (!(jtag_reset_config & RESET_HAS_SRST))
@@ -743,10 +753,32 @@ int arm7_9_assert_reset(target_t *target)
 		return ERROR_FAIL;
 	}
 
+	/*
+	 * Some targets do not support communication while TRST is asserted. We need to
+	 * set up the reset vector catch here.
+	 * 
+	 * If TRST is in use, then these settings will be reset anyway, so setting them
+	 * here is harmless.  
+	 */
+	if (arm7_9->has_vector_catch)
+	{
+		/* program vector catch register to catch reset vector */
+		embeddedice_write_reg(&arm7_9->eice_cache->reg_list[EICE_VEC_CATCH], 0x1);
+	}
+	else
+	{
+		/* program watchpoint unit to match on reset vector address */
+		embeddedice_write_reg(&arm7_9->eice_cache->reg_list[EICE_W0_ADDR_MASK], 0x3);
+		embeddedice_write_reg(&arm7_9->eice_cache->reg_list[EICE_W0_DATA_MASK], 0x0);
+		embeddedice_write_reg(&arm7_9->eice_cache->reg_list[EICE_W0_CONTROL_VALUE], 0x100);
+		embeddedice_write_reg(&arm7_9->eice_cache->reg_list[EICE_W0_CONTROL_MASK], 0xf7);
+	}
+
 	/* we can't know what state the target is in as we might e.g.
 	 * be resetting after a power dropout, so we need to issue a tms/srst
 	 */
 	
+	
 	/* assert SRST and TRST */
 	/* system would get ouf sync if we didn't reset test-logic, too */
 	jtag_add_reset(1, 1);
@@ -766,10 +798,6 @@ int arm7_9_assert_reset(target_t *target)
 	target->state = TARGET_RESET;
 	jtag_add_sleep(50000);
 
-	/* at this point we TRST *may* be deasserted */
-	arm7_9_prepare_reset_halt(target);
-
-	
 	armv4_5_invalidate_core_regs(target);
 
 	return ERROR_OK;
@@ -909,15 +937,6 @@ int arm7_9_soft_reset_halt(struct target_s *target)
 	return ERROR_OK;
 }
 
-int arm7_9_prepare_reset_halt(target_t *target)
-{
-	if ((target->reset_mode!=RESET_HALT)&&(target->reset_mode!=RESET_INIT))
-	{
-		return ERROR_OK;
-	}
-	return arm7_9_halt(target);
-}
-
 int arm7_9_halt(target_t *target)
 {
 	armv4_5_common_t *armv4_5 = target->arch_info;
@@ -928,7 +947,7 @@ int arm7_9_halt(target_t *target)
 	
 	if (target->state == TARGET_HALTED)
 	{
-		LOG_WARNING("target was already halted");
+		LOG_DEBUG("target was already halted");
 		return ERROR_OK;
 	}
 	
diff --git a/src/target/cortex_m3.c b/src/target/cortex_m3.c
index 406a00af4..19b0a758b 100644
--- a/src/target/cortex_m3.c
+++ b/src/target/cortex_m3.c
@@ -429,7 +429,7 @@ int cortex_m3_halt(target_t *target)
 	
 	if (target->state == TARGET_HALTED)
 	{
-		LOG_WARNING("target was already halted");
+		LOG_DEBUG("target was already halted");
 		return ERROR_OK;
 	}
 	
diff --git a/src/target/ecos/at91eb40a.elf b/src/target/ecos/at91eb40a.elf
new file mode 100644
index 0000000000000000000000000000000000000000..451657a5a506ab1f60981b8b3627288c8950bc8f
GIT binary patch
literal 36832
zcmeH~U2Ggz701u)ZWFWKxC3#)N-S{^DUDF<Odt<Y3Dp)QO_2jyY$t7rMY8s;lT~f+
zc6XdK2#K}hlr*H4o5qS1lzPe&vV<_Hh!AR{<)a9pJh%iTgwk~GOa?h24@Mxq`mp@Z
z%&u)hg~TK1jC6hP+<Wdh=l<?FXVzceyZ;HpFtXHmVziYE9#@HWqRUJZ#nA60h54<N
zqz|mDvkW&kMU;4qXgyxTIqu~V0zyCt2mv7=1cZPP5CTF#2nYcoAOwVf5D)@FKnMr{
zAs_^VfDjM@LO=)z0U;m+gn$qb0zyCt2mv7=1cZPP5CTF#2nYcoAOwVf5D)@FKnMr{
zAs_^VfDjM@LO=)z0U;m+gn$qb0zyCt2mv7=1cZPP5CTF#2nYcoAOwVf5D)@FKnMr{
zAs_^VfDjM@LO=)z0U;m+gn$qb0zyCt2mv7=1cZPP5CTF#2nYcoAOwVf5D)@FKnMr{
zAs_^VfDjM@LO=)z0U_`|M4)4FE_j6K4<%AMh4E(_;{?qGJm+2};<lmY=m)9m4*j<4
zPW!@sk1WTJlcVW7mzQ{r=M$JuEPlaDTXTVFwFaiz9PGk4PQ7{^(I@$x_mTAztZxns
z>y*cGf3DZ>w!_{o*v7hMy)Dq|zDbn0MzpmW*>BothYgcjgLbnuc(+~;_jEu{2Xqqk
z`7xp-j}_)%_im@v1NqI6-yFo1qaSbB;dO=i)MAf!|2aC=*yvEL!CMVGo!Ha4#tx6S
zH0&tYX@@=&b~<p@a>EX<Z@JHo310o_Irw}b^qJW)n@*Yv4EWCsOfcAK&IJ#;jy9IT
zm@;7J=)czMn~3+RA>N~nT67m3wW%PbrUKr_?3}4pZYkUY+hARB)&-e?7ozp$cW`%K
zVqa!ge2G;dQ*!+E<iwZ1d%49_yw<B-XD)bv=xlo=tHJtF<4Dzw(?JctFB#<ckY7rf
zkWU+K!gTZk?slC*{J?hS@+|J8Uw;JgKuvp)A?5fjM8D&68@0D@*J;2v)TH+zqD?W%
z=)c$Nza)B!WpMV{z;J)+C+Jm|($0=`Y3E}Z*l6niJ>rSdXM*&aIh;eYUj)Ar7;h~_
z@=37Zee0P?$<YD!GP?z^`NfNfeYD$Xdrmi4y}KIcyPpHI+C^{~@G0Zy*b%UufgZ>4
zjVg44-QT_kcGg8O>(e1O#pB+P+d4Y!^4Xf)AiH!gWHsSFU^RKM{)7H@u(_U|3&^<`
zq}&T&_+_0;JKx9IUu#pp(JiI}{f=(KzGQ9C<rqqVa|&!)uqUC|ua|<ET6FHzvZK$e
zjV&kRv5s{|axTjzs%Ko*XM%SQvBQkQxIqj)4IgoqO}iWWJC|P$5}DI3`}u3|`%$;!
z?}E$*XEKbp&Sjh-^J1_SbI~1L43f~z=VjJQ%=t{j_{q}|^Omy_cdjj*D;&Em$jJ`s
z@t$Af_YZd*(jP_6AA{~=Y1l+AaEx62@gconE$V&St6mE133;{Ojn+v`J;XI4#pgrr
zbH12rCP<hwfw7bK&!A3Bx&&ROH6668>43~>#LaZ@M~;sPqMv;eMIN<@{ci(H)HvTv
zcil1IZ!8VgE_%)ftBSRaehT&swa4RnMAj|b=}ojgZK%(AhCA&UwR7G!_-#<x{|o0g
z!FKh{r3Cb{t`9>OsaLV*Wwc(sf%T>Lcm~;in?lau-f`|E)qaKb8)ySMTt^OZokhMu
zw;k$EU|)jz{RHeL%n5I)UO&sevF$c$>RCjsejBwLde}#*dIn_IzmJb`I^wdgsg-^x
ze7C@3e!t@%xQBcI*ZJC%*AJWXY0PCDf5vqDH`1r{wah8~hIvXas2gZCeZ{<?mzCpR
zF>88dU7gYvY%K5Vx}(00Jg_bWuel4_D1o(d;)ZfIrp#ARbMSp(W>w6a2H&AhWE}ko
zu$do$4@X|`4(xXPjgMf=evsq$gHO-4N$+ZULZ`v&b(+vlsK@bnZh@|Ij@~s?ua}3O
z1-hxLmg)Ti_r&#TA$?O5c)~WzCAm(wrs0$O6|d=AxDFo;6+>9``Z3)1&G4T4{T?tS
zbt!0{IgfjL2Jr`<XV7Zr1LR+_(>jlDLdEaQOd^&k+2Us1HpC8c&U=jQfki^S5+tnI
z+c7nSJnZ$~<9f+;68ruX+Ih;~!LsQ~!94Ec09bTXF9h?rkA5(j$G7L2HGy+H?eqA6
za{MY7TvZeL8W`|9uUnQA=eY%|W^fJ}s9z@Lu31&%JurQ%XVP0=8gZ*?3NaHgLog>f
z7puqvFoVCiqjaB#7{<~7zA==nZ*%-Q*t1*=XM^rdvD$zaL)@YEL+%+rQJZb&Z@>+_
za}8hq2J)jed)t_C{GTH)k<b3OxQG7m8-V;Y$n-f5IhQ#v4VUl8*@#%`sG+VAxTQ?y
zj{8Hrd>nOlegLrnw)5D-vGRl3gytAw1`g(4$N70~!Mep9G{+K;d#+D<X?4!4*5WH?
zf2etOD<0ON@GQ`AMcs0*Sc|CteVn(OVw}tBYaB11Zp6wBzQ=cPR<2VV`^>7fb}rU@
zPeIQ;oR{lRcXzkiTh3PUYPeh+RS%cC9xgqqFpn~YfDG3&<>JwDc65z|%GwZRxr30|
zlRsV<%Bym|R4m&SHBvmGju%Jl?9n{Y7mF%iE*HzHOBGA`a@H;s$J9`9v^0{pu}q&I
zJDwdW<kS=UAMbloWplZ5zEZ*b-f)v$K3Nz$s%%yQAKzzwq&W2K_VF?9{%ubw@|*VM
z$MWUEP~^ypzuU|CqwGwfqE3_xcD@VZc7Djt=O99nKb7&puFA=ZogY<WMOzid3U&eR
zel?OgF!t<N@x<7DdRbwCCmCvGyi&@K<y6JahR1EPiewrN-Y>N$YiHGQxIBDP4QC4@
z`JBoQ+xhY;K`<{DAffESC{~N(wmOl8Z(ubH*17OPnlia!z7o1$887h-HJ7Qz2Suc-
zuy^Z(5pr+!Q5gP*R>!j{ETjJ`0^OBk6}xO_2dUf6KW|g_r%(dAhexuNV~3v`&zDdB
z%S;&UhX=znTr1g#@WX@S!_-|a<`CJ`9sM0do_8ZJkhuTF(+XLRQT!evszz-feBlZF
z-xqcCLG(>I{(psAe`AfirX1?_iX8uT=Vsv}(tMh7pIIZvzd5;~u&z8!xxR)RtKk0w
zxOK!=#8&JcYRIvV?n_Zym5O}g_bgfq8mnl^ZL#puc$#*H@y@!q@eY<<`$Y56`Wkma
LxzRO(O}T#p=vFk|

literal 0
HcmV?d00001

diff --git a/src/target/target.c b/src/target/target.c
index f90834d1b..7673f5d22 100644
--- a/src/target/target.c
+++ b/src/target/target.c
@@ -2053,14 +2053,13 @@ int handle_verify_image_command(struct command_context_s *cmd_ctx, char *cmd, ch
 	
 	if (argc < 1)
 	{
-		command_print(cmd_ctx, "usage: verify_image <file> [offset] [type]");
-		return ERROR_OK;
+		return ERROR_COMMAND_SYNTAX_ERROR;
 	}
 	
 	if (!target)
 	{
 		LOG_ERROR("no target selected");
-		return ERROR_OK;
+		return ERROR_FAIL;
 	}
 	
 	duration_start_measure(&duration);
@@ -2078,9 +2077,9 @@ int handle_verify_image_command(struct command_context_s *cmd_ctx, char *cmd, ch
 
 	image.start_address_set = 0;
 
-	if (image_open(&image, args[0], (argc == 3) ? args[2] : NULL) != ERROR_OK)
+	if ((retval=image_open(&image, args[0], (argc == 3) ? args[2] : NULL)) != ERROR_OK)
 	{
-		return ERROR_OK;
+		return retval;
 	}
 	
 	image_size = 0x0;
diff --git a/src/target/target/at91eb40a.cfg b/src/target/target/at91eb40a.cfg
index 3d5eb14ee..658c6d0cc 100644
--- a/src/target/target/at91eb40a.cfg
+++ b/src/target/target/at91eb40a.cfg
@@ -14,7 +14,6 @@ reset_config srst_only srst_pulls_trst
 jtag_device 4 0x1 0xf 0xe
 
 #target configuration
-#target arm7tdmi <endianness> <reset mode> <chainpos> <variant>
 target arm7tdmi little reset_init 0 arm7tdmi-s_r4
 
 # speed up memory downloads
@@ -24,6 +23,9 @@ arm7_9 dcc_downloads enable
 # OpenOCD does not have a flash driver for for AT91FR40162S 
 target_script 0 reset event/at91eb40a_reset.script
 
+#flash driver
+flash bank ecosflash 0x01000000 0x200000 2 2 0 ecos/at91eb40a.elf
+
 # required for usable performance. Used for lots of
 # other things than flash programming.
 working_area 0 0x00000000 0x20000 nobackup
diff --git a/src/target/target/zy1000.cfg b/src/target/target/zy1000.cfg
index 5a2fab682..b082ca240 100644
--- a/src/target/target/zy1000.cfg
+++ b/src/target/target/zy1000.cfg
@@ -14,7 +14,6 @@ reset_config srst_only srst_pulls_trst
 jtag_device 4 0x1 0xf 0xe
 
 #target configuration
-#target arm7tdmi <endianness> <reset mode> <chainpos> <variant>
 target arm7tdmi little reset_init 0 arm7tdmi-s_r4
 
 # at CPU CLK <32kHz this must be disabled
@@ -22,7 +21,7 @@ arm7 fast_memory_access enable
 arm7_9 dcc_downloads enable
 
 
-flash bank ecosflash 0x01000000 0x200000 2 2 0 /rom/at91eb40a.elf
+flash bank ecosflash 0x01000000 0x200000 2 2 0 ecos/at91eb40a.elf
 target_script 0 reset event/zy1000_reset.script
 
 # required for usable performance. Used for lots of
diff --git a/src/target/xscale.c b/src/target/xscale.c
index 1d379f591..b9a367ad6 100644
--- a/src/target/xscale.c
+++ b/src/target/xscale.c
@@ -1263,7 +1263,7 @@ int xscale_halt(target_t *target)
 
 	if (target->state == TARGET_HALTED)
 	{
-		LOG_WARNING("target was already halted");
+		LOG_DEBUG("target was already halted");
 		return ERROR_OK;
 	}
 	else if (target->state == TARGET_UNKNOWN)