mips: mips32_pracc_fastdata_xfer() little modification

In this function after loading the handler code and the jump code there is a call
to wait_for_pracc_rw() to verify that a pracc access is pending.
Next the address is read to verify that the handler is running, the address should be at
fastdata area.
Next, another call is made to wait_for_pracc_rw(). This call is not needed, we now already
that a pracc access is pending.
Better we call this function before loading the end address to be sure it is loaded correctly.

Signed-off-by: Salvador Arroyo <sarroyofdez@yahoo.es>
Change-Id: If311450ea634786fc28cf1a8e18ed24ce5257d20
Reviewed-on: http://openocd.zylin.com/1142
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
__archive__
Salvador Arroyo 2013-02-23 22:53:35 +01:00 committed by Spencer Oliver
parent 1d040adb0d
commit 2dde122b66
1 changed files with 6 additions and 5 deletions

View File

@ -944,6 +944,7 @@ int mips32_pracc_fastdata_xfer(struct mips_ejtag *ejtag_info, struct working_are
mips_ejtag_drscan_32_out(ejtag_info, ejtag_ctrl);
}
/* wait PrAcc pending bit for FASTDATA write */
retval = wait_for_pracc_rw(ejtag_info, &ejtag_ctrl);
if (retval != ERROR_OK)
return retval;
@ -958,18 +959,18 @@ int mips32_pracc_fastdata_xfer(struct mips_ejtag *ejtag_info, struct working_are
if (address != MIPS32_PRACC_FASTDATA_AREA)
return ERROR_FAIL;
/* wait PrAcc pending bit for FASTDATA write */
retval = wait_for_pracc_rw(ejtag_info, &ejtag_ctrl);
if (retval != ERROR_OK)
return retval;
/* Send the load start address */
val = addr;
mips_ejtag_set_instr(ejtag_info, EJTAG_INST_FASTDATA);
mips_ejtag_fastdata_scan(ejtag_info, 1, &val);
retval = wait_for_pracc_rw(ejtag_info, &ejtag_ctrl);
if (retval != ERROR_OK)
return retval;
/* Send the load end address */
val = addr + (count - 1) * 4;
mips_ejtag_set_instr(ejtag_info, EJTAG_INST_FASTDATA);
mips_ejtag_fastdata_scan(ejtag_info, 1, &val);
for (i = 0; i < count; i++) {