stm32w: Added sample target configuration for STM32W108 with STLink-V2

As requested, here is the target configuration that I'm using for an
STLink-V2-attached STM32W108C8. For some reason, it only seems to work
with "reset_config trst_only".

Change-Id: Icbff4f83343e1f505d8afdfc53ff6f8b7496cac9
Signed-off-by: Ben Nahill <bnahill@gmail.com>
Reviewed-on: http://openocd.zylin.com/1347
Tested-by: jenkins
Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
__archive__
Ben Nahill 2013-04-19 11:10:04 -04:00 committed by Freddie Chopin
parent 2cb486213e
commit 28cf4e463b
1 changed files with 23 additions and 0 deletions

View File

@ -0,0 +1,23 @@
#
# STM32W108xx stlink pseudo target
#
if { [info exists CHIPNAME] == 0 } {
set CHIPNAME stm32w108
}
if { [info exists CPUTAPID] == 0 } {
set CPUTAPID 0x1ba01477
}
if { [info exists WORKAREASIZE] == 0 } {
# 4k -- This should work for all chips, though perhaps not optimally
set WORKAREASIZE 0x1000
}
source [find target/stm32_stlink.cfg]
# Use the flash driver from the EM357
set _FLASHNAME $_CHIPNAME.flash
# 64k (0x10000) of flash
flash bank $_FLASHNAME em357 0x08000000 0x10000 0 0 $_TARGETNAME