tcl/target/stm32f7x: configure faster system clock in reset-init

STM32F7xx devices need faster clock for flash programming
over JTAG transport. Using reset default 16 MHz clock
resulted in lot of DAP WAITs and substantial decrease
of flashing performance.

Adapted to the restructured dap support
(see 2231da8ec4).

Change-Id: Ida6915331dd924c9c0d08822fd94c04ad408cdc5
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: http://openocd.zylin.com/4464
Tested-by: jenkins
Reviewed-by: Christopher Head <chead@zaber.com>
bscan_tunnel
Tomas Vanek 2018-03-12 23:42:23 +01:00
parent 62b088df4e
commit 20d18d415d
1 changed files with 24 additions and 0 deletions

View File

@ -82,3 +82,27 @@ $_TARGETNAME configure -event trace-config {
# assignment
mmw 0xE0042004 0x00000020 0
}
$_TARGETNAME configure -event reset-init {
# Configure PLL to boost clock to HSI x 10 (160 MHz)
mww 0x40023804 0x08002808 ;# RCC_PLLCFGR 16 Mhz /10 (M) * 128 (N) /2(P)
mww 0x40023C00 0x00000107 ;# FLASH_ACR = PRFTBE | 7(Latency)
mmw 0x40023800 0x01000000 0 ;# RCC_CR |= PLLON
sleep 10 ;# Wait for PLL to lock
mww 0x40023808 0x00009400 ;# RCC_CFGR_PPRE1 = 5(div 4), PPRE2 = 4(div 2)
mmw 0x40023808 0x00000002 0 ;# RCC_CFGR |= RCC_CFGR_SW_PLL
# Boost SWD frequency
# Do not boost JTAG frequency and slow down JTAG memory access or flash write algo
# suffers from DAP WAITs
if {[using_jtag]} {
[[target current] cget -dap] memaccess 16
} {
adapter_khz 8000
}
}
$_TARGETNAME configure -event reset-start {
# Reduce speed since CPU speed will slow down to 16MHz with the reset
adapter_khz 2000
}