ARMv7-A: stop using CP15 ops

The ARMv7-A code uses read_cp15() to access fault registers.
Instead, use DPM operations directly, passing in the relevant
MRC instructions.

This eliminates per-operation overhead (though it'll be hard
to observe, this is uncommon) and helps eliminate read_cp15().

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
__archive__
David Brownell 2009-12-01 00:48:40 -08:00
parent fb984a477d
commit 209a0197f0
1 changed files with 35 additions and 4 deletions

View File

@ -38,17 +38,48 @@ static void armv7a_show_fault_registers(struct target *target)
{
uint32_t dfsr, ifsr, dfar, ifar;
struct armv7a_common *armv7a = target_to_armv7a(target);
struct arm_dpm *dpm = armv7a->armv4_5_common.dpm;
int retval;
armv7a->read_cp15(target, 0, 0, 5, 0, &dfsr);
armv7a->read_cp15(target, 0, 1, 5, 0, &ifsr);
armv7a->read_cp15(target, 0, 0, 6, 0, &dfar);
armv7a->read_cp15(target, 0, 2, 6, 0, &ifar);
retval = dpm->prepare(dpm);
if (retval != ERROR_OK)
return;
/* ARMV4_5_MRC(cpnum, op1, r0, CRn, CRm, op2) */
/* c5/c0 - {data, instruction} fault status registers */
retval = dpm->instr_read_data_r0(dpm,
ARMV4_5_MRC(15, 0, 0, 5, 0, 0),
&dfsr);
if (retval != ERROR_OK)
goto done;
retval = dpm->instr_read_data_r0(dpm,
ARMV4_5_MRC(15, 0, 0, 5, 0, 1),
&ifsr);
if (retval != ERROR_OK)
goto done;
/* c6/c0 - {data, instruction} fault address registers */
retval = dpm->instr_read_data_r0(dpm,
ARMV4_5_MRC(15, 0, 0, 6, 0, 0),
&dfar);
if (retval != ERROR_OK)
goto done;
retval = dpm->instr_read_data_r0(dpm,
ARMV4_5_MRC(15, 0, 0, 6, 0, 2),
&ifar);
if (retval != ERROR_OK)
goto done;
LOG_USER("Data fault registers DFSR: %8.8" PRIx32
", DFAR: %8.8" PRIx32, dfsr, dfar);
LOG_USER("Instruction fault registers IFSR: %8.8" PRIx32
", IFAR: %8.8" PRIx32, ifsr, ifar);
done:
/* (void) */ dpm->finish(dpm);
}
int armv7a_arch_state(struct target *target)