board scripts: Marvell PXA270M processor has a new TAPID: 0x89265013

the new Marvell PXA270M processor has a new TAPID: 0x89265013.
Attached you will find a patch for target/pxa270.cfg that will handle this.

I have also attached a board/colibri.cfg file to support the Colibri
PXA270 module by Toradex.

Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
__archive__
Takács Áron 2010-09-14 11:15:35 +02:00 committed by Øyvind Harboe
parent 35691065f7
commit 1b0f194d90
2 changed files with 20 additions and 1 deletions

13
tcl/board/colibri.cfg Normal file
View File

@ -0,0 +1,13 @@
# Toradex Colibri PXA270
source [find target/pxa270.cfg]
reset_config trst_and_srst srst_push_pull
adapter_nsrst_assert_width 40
# CS0 -- one bank of CFI flash, 32 MBytes
# the bank is 32-bits wide, two 16-bit chips in parallel
set _FLASHNAME $_CHIPNAME.flash
flash bank $_FLASHNAME cfi 0x00000000 0x02000000 2 4 $_TARGETNAME

View File

@ -27,6 +27,12 @@ if { [info exists CPUTAPID2 ] } {
set _CPUTAPID2 0x79265013 set _CPUTAPID2 0x79265013
} }
if { [info exists CPUTAPID3 ] } {
set _CPUTAPID2 $CPUTAPID3
} else {
# set useful default
set _CPUTAPID3 0x89265013
}
# set adapter_nsrst_delay to the delay introduced by your reset circuit # set adapter_nsrst_delay to the delay introduced by your reset circuit
# the rest of the needed delays are built into the openocd program # the rest of the needed delays are built into the openocd program
@ -36,7 +42,7 @@ adapter_nsrst_delay 260
jtag_ntrst_delay 250 jtag_ntrst_delay 250
set _TARGETNAME $_CHIPNAME.cpu set _TARGETNAME $_CHIPNAME.cpu
jtag newtap $_CHIPNAME cpu -irlen 7 -ircapture 0x1 -irmask 0x7f -expected-id $_CPUTAPID -expected-id $_CPUTAPID2 jtag newtap $_CHIPNAME cpu -irlen 7 -ircapture 0x1 -irmask 0x7f -expected-id $_CPUTAPID -expected-id $_CPUTAPID2 -expected-id $_CPUTAPID3
target create $_TARGETNAME xscale -endian $_ENDIAN -chain-position $_TARGETNAME -variant pxa27x target create $_TARGETNAME xscale -endian $_ENDIAN -chain-position $_TARGETNAME -variant pxa27x
# maps to PXA internal RAM. If you are using a PXA255 # maps to PXA internal RAM. If you are using a PXA255