target: remove unused event definitions

Events reset-halt-pre, reset-halt-post, reset-wait-pre and
reset-wait-post are not used anywhere.

Change-Id: I9a0f94875b102d9b08f6c2fd9d73a9f05f8e8e79
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: http://openocd.zylin.com/4285
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
fence_i_fix_for_release
Tomas Vanek 2017-10-31 12:32:22 +01:00 committed by Spencer Oliver
parent 3f6ab8e6a6
commit 19f8f58c0d
3 changed files with 0 additions and 20 deletions

View File

@ -4503,12 +4503,6 @@ and (if the target is using it) after SRST has been
released on the scan chain.
@item @b{reset-end}
@* Issued as the final step in @command{reset} processing.
@ignore
@item @b{reset-halt-post}
@* Currently not used
@item @b{reset-halt-pre}
@* Currently not used
@end ignore
@item @b{reset-init}
@* Used by @b{reset init} command for board-specific initialization.
This event fires after @emph{reset-deassert-post}.
@ -4525,12 +4519,6 @@ before @command{reset_init} is called.
This is the most robust place to use @command{jtag_rclk}
or @command{adapter_khz} to switch to a low JTAG clock rate,
when reset disables PLLs needed to use a fast clock.
@ignore
@item @b{reset-wait-pos}
@* Currently not used
@item @b{reset-wait-pre}
@* Currently not used
@end ignore
@item @b{resume-start}
@* Before any target is resumed
@item @b{resume-end}

View File

@ -204,10 +204,6 @@ static const Jim_Nvp nvp_target_event[] = {
{ .value = TARGET_EVENT_RESET_ASSERT_POST, .name = "reset-assert-post" },
{ .value = TARGET_EVENT_RESET_DEASSERT_PRE, .name = "reset-deassert-pre" },
{ .value = TARGET_EVENT_RESET_DEASSERT_POST, .name = "reset-deassert-post" },
{ .value = TARGET_EVENT_RESET_HALT_PRE, .name = "reset-halt-pre" },
{ .value = TARGET_EVENT_RESET_HALT_POST, .name = "reset-halt-post" },
{ .value = TARGET_EVENT_RESET_WAIT_PRE, .name = "reset-wait-pre" },
{ .value = TARGET_EVENT_RESET_WAIT_POST, .name = "reset-wait-post" },
{ .value = TARGET_EVENT_RESET_INIT, .name = "reset-init" },
{ .value = TARGET_EVENT_RESET_END, .name = "reset-end" },

View File

@ -253,10 +253,6 @@ enum target_event {
TARGET_EVENT_RESET_ASSERT_POST,
TARGET_EVENT_RESET_DEASSERT_PRE,
TARGET_EVENT_RESET_DEASSERT_POST,
TARGET_EVENT_RESET_HALT_PRE,
TARGET_EVENT_RESET_HALT_POST,
TARGET_EVENT_RESET_WAIT_PRE,
TARGET_EVENT_RESET_WAIT_POST,
TARGET_EVENT_RESET_INIT,
TARGET_EVENT_RESET_END,