zcy
/
tinyriscv-openocd
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Initial config for the Voltcraft DSO-3062C. 

This is a digital oscilloscope which uses a Samsung S3C2440 internally.

http://randomprojects.org/wiki/Voltcraft_DSO-3062C

Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Change-Id: I5e28c3a8f30665a162e34c831294e4e658a16ebb
Reviewed-on: http://openocd.zylin.com/548
Tested-by: jenkins
Reviewed-by: Peter Stuge <peter@stuge.se>
__archive__
Uwe Hermann 2012-04-02 00:25:37 +02:00 committed by Peter Stuge
parent d40cb56d49
commit 1748aab2c9
1 changed files with 31 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

31
tcl/board/voltcraft_dso-3062c.cfg Normal file
View File

@ -0,0 +1,31 @@
#
# Voltcraft DSO-3062C digital oscilloscope (uses a Samsung S3C2440)
#
# http://www.eevblog.com/forum/general-chat/hantek-tekway-dso-hack-get-200mhz-bw-for-free/
# http://www.mikrocontroller.net/topic/249628
# http://elinux.org/Das_Oszi
# http://randomprojects.org/wiki/Voltcraft_DSO-3062C
#
# Enable this if your JTAG adapter supports multiple transports (JTAG or SWD).
# Otherwise comment it out, as it will cause an OpenOCD error.
### transport select jtag
source [find target/samsung_s3c2440.cfg]
adapter_khz 16000
# Samsung K9F1208U0C NAND flash chip (64MiB, 3.3V, 8-bit)
nand device $_CHIPNAME.nand s3c2440 $_TARGETNAME
# arm7_9 fast_memory_access enable
# arm7_9 dcc_downloads enable
init
reset
halt
scan_chain
targets
nand probe 0
nand list