From 122ec5fbe2e677c955e55bea03f5310c0c269b89 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?J=C3=B6rg=20Wunsch?= <openocd@uriah.heep.sax.de>
Date: Fri, 14 Mar 2014 11:29:24 +0100
Subject: [PATCH] Make the Atmel SAM3 family SWD-aware
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Atmel's SAM3 and SAM4 processor families are very close to each other
in many respects.  However, so far, only the SAM4 target script
contained the magic to allow using SWD, while SAM3 was tied to JTAG
only.  This e.g. prevented the CMSIS-DAP driver from accessing SAM3
devices as it only uses SWD transport (by now).

The patch pulls all the things from the SAM4 target script that are
also applicable to SAM3 devices.  With the patch, an Atmel CMSIS-DAP
debugger (Atmel-ICE) was proven to be able to successfully attach to a
SAM3S-EK evaluation kit.  I also cross-checked that accessing through
a SAM-ICE (Segger J-Link) still works with the patch.

Change-Id: I20dafbff8e1e9f967da950e48a56205586eeef8d
Signed-off-by: Jörg Wunsch <openocd@uriah.heep.sax.de>
Reviewed-on: http://openocd.zylin.com/2046
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
---
 tcl/target/at91sam3XXX.cfg | 51 ++++++++++++++++++++++++--------------
 1 file changed, 32 insertions(+), 19 deletions(-)

diff --git a/tcl/target/at91sam3XXX.cfg b/tcl/target/at91sam3XXX.cfg
index 075b462d0..f36475b6d 100644
--- a/tcl/target/at91sam3XXX.cfg
+++ b/tcl/target/at91sam3XXX.cfg
@@ -24,6 +24,9 @@
 # at91sam3X8C
 # at91sam3X8E
 # at91sam3X8H
+
+source [find target/swj-dp.tcl]
+
 if { [info exists CHIPNAME] } {
    set _CHIPNAME $CHIPNAME
 } else {
@@ -36,6 +39,33 @@ if { [info exists ENDIAN] } {
    set _ENDIAN little
 }
 
+# Work-area is a space in RAM used for flash programming
+# By default use 64kB
+if { [info exists WORKAREASIZE] } {
+   set _WORKAREASIZE $WORKAREASIZE
+} else {
+   set _WORKAREASIZE 0x4000
+}
+
+#jtag scan chain
+if { [info exists CPUTAPID] } {
+   set _CPUTAPID $CPUTAPID
+} else {
+   set _CPUTAPID 0x4ba00477
+}
+
+swj_newdap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
+
+set _TARGETNAME $_CHIPNAME.cpu
+target create $_TARGETNAME cortex_m -endian $_ENDIAN -chain-position $_TARGETNAME
+
+# 16K is plenty, the smallest chip has this much
+$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0
+
+$_TARGETNAME configure -event gdb-flash-erase-start {
+    halt
+}
+
 # JTAG speed should be <= F_CPU/6. F_CPU after reset is 4 MHz, so use F_JTAG = 0.5MHz
 #
 # Since we may be running of an RC oscilator, we crank down the speed a
@@ -46,25 +76,8 @@ if { [info exists ENDIAN] } {
 adapter_khz 500
 
 adapter_nsrst_delay 100
-jtag_ntrst_delay 100
-
-#jtag scan chain
-if { [info exists CPUTAPID] } {
-   set _CPUTAPID $CPUTAPID
-} else {
-   set _CPUTAPID 0x4ba00477
-}
-
-jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
-
-set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME cortex_m -endian $_ENDIAN -chain-position $_TARGETNAME
-
-# 16K is plenty, the smallest chip has this much
-$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size 16384 -work-area-backup 0
-
-$_TARGETNAME configure -event gdb-flash-erase-start {
-    halt
+if {$using_jtag} {
+   jtag_ntrst_delay 100
 }
 
 # if srst is not fitted use SYSRESETREQ to