From 01c0ffe98f87e35f21b8f392b6432d4190d1eb43 Mon Sep 17 00:00:00 2001
From: Laurent Charpentier <laurent_pubs@yahoo.com>
Date: Mon, 6 Jun 2011 11:51:38 +0200
Subject: [PATCH] Added configuration file for stm32f2xxx.

---
 tcl/target/stm32f2xxx.cfg | 56 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 56 insertions(+)
 create mode 100644 tcl/target/stm32f2xxx.cfg

diff --git a/tcl/target/stm32f2xxx.cfg b/tcl/target/stm32f2xxx.cfg
new file mode 100644
index 000000000..9ebc00f34
--- /dev/null
+++ b/tcl/target/stm32f2xxx.cfg
@@ -0,0 +1,56 @@
+# script for stm32f2xxx
+
+if { [info exists CHIPNAME] } {
+   set  _CHIPNAME $CHIPNAME
+} else {
+   set  _CHIPNAME stm32f2xxx
+}
+
+if { [info exists ENDIAN] } {
+   set  _ENDIAN $ENDIAN
+} else {
+   set  _ENDIAN little
+}
+
+# Work-area is a space in RAM used for flash programming
+# By default use 64kB
+if { [info exists WORKAREASIZE] } {
+   set  _WORKAREASIZE $WORKAREASIZE
+} else {
+   set  _WORKAREASIZE 0x10000
+}
+
+# JTAG speed should be <= F_CPU/6. F_CPU after reset is 8MHz, so use F_JTAG = 1MHz
+jtag_khz 1000
+
+jtag_nsrst_delay 100
+jtag_ntrst_delay 100
+
+#jtag scan chain
+if { [info exists CPUTAPID ] } {
+   set _CPUTAPID $CPUTAPID
+} else {
+  # See STM Document RM0033
+  # Section 32.6.3 - corresponds to Cortex-M3 r2p0
+   set _CPUTAPID 0x4ba00477
+}
+jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
+
+if { [info exists BSTAPID ] } {
+   set _BSTAPID $BSTAPID
+} else {
+  # See STM Document RM0033
+  # Section 32.6.2
+  # 
+  set _BSTAPID 0x06411041
+}
+jtag newtap $_CHIPNAME bs -irlen 5 -expected-id $_BSTAPID
+
+set _TARGETNAME $_CHIPNAME.cpu
+target create $_TARGETNAME cortex_m3 -endian $_ENDIAN -chain-position $_TARGETNAME
+
+$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0
+
+set _FLASHNAME $_CHIPNAME.flash
+flash bank $_FLASHNAME stm32f2xxx 0 0 0 0 $_TARGETNAME
+