tinyriscv-openocd/testing/build.test2/local.uses

162 lines
4.9 KiB
Plaintext
Raw Normal View History

# -*- mode: makefile -*-
#========================================
# DO NOT REMOVE THE LINE BELOW
HERE := $(shell pwd)
# DO NOT REMOVE THE LINE ABOVE
#========================================
# These are common CYGWIN build settings.
# Comment out things you do not want.
# Or unComment things you want.
# PCs always have printer ports...
X86_PRINTER_PORT ?= y
# Chose *ONE* of these three solutions.
#FTD2232_DRIVER = none
FT2232_DRIVER = ftd2xx
#FT2232_DRIVER = libftdi
# Do you have "libusb" installed?
ifeq (x"${FT2232_DRIVER}",x"libftdi")
# With LIBFTDI... LIBUSB is manditory.
USE_LIBUSB = y
endif
# By default... we assume libusb not present.
USE_LIBUSB ?= n
#========================================
# DO NOT EDIT SETTINGS BELOW THIS LINE
#========================================
#========================================
# House keeping...
# Solve problems on systems with DASH.. Grrr...
SHELL=/bin/bash
export SHELL
VIRGINS ?= ${HERE}/virgins
INSTALL_DIR ?= $(HERE)/install
PREFIX ?= ${INSTALL_DIR}
# Determine the build platform.
BUILD_SYSNAME_Linux =linux
BUILD_SYSNAME_linux =linux
BUILD_SYSNAME_CYGWIN_NT =cygwin
BUILD_SYSNAME_MINGW32_NT =mingw32
BUILD_SYSNAME_Darwin =darwin
BUILD_SYSNAME_darwin =darwin
BUILD_SYSNAME :=$(BUILD_SYSNAME_$(shell uname --sysname | cut -d'-' -f1))
# And machine (ie: i686, x86_64, or what ever)
BUILD_MACHINE :=$(BUILD_SYSNAME).$(shell uname -m)
#========================================
#
FTD2XX_LINUX_VERSION=0.4.16
FTD2XX_LINUX_DIR = ${HERE}/libftd2xx${FTD2XX_LINUX_VERSION}
FTD2XX_LINUX_64_DIR = ${HERE}/libftd2xx${FTD2XX_LINUX_VERSION}_x86_64
# Wiggler type interfaces are here.
OPENOCD_CONFIG_OPTIONS_printer_y += --enable-parport
OPENOCD_CONFIG_OPTIONS_printer_y += --enable-parport-giveio
OPENOCD_CONFIG_OPTIONS_printer_y += --enable-gw16012
OPENOCD_CONFIG_OPTIONS_printer_y += --enable-parport-giveio
OPENOCD_CONFIG_OPTIONS_printer_y += --enable-amtjtagaccel
# FTD2XX only supports these
OPENOCD_CONFIG_OPTIONS_ft2232_none =
OPENOCD_CONFIG_OPTIONS_ft2232_ftd2xx = --enable-ft2232_ftd2xx --enable-presto_ftd2xx --with-ftd2xx-win32-zipdir=${FTD2XX_WIN32_DIR}
OPENOCD_CONFIG_OPTIONS_ft2232_libftdi = --enable-ft2232_libftdi --enable-presto_libftdi
# LIBUSB - adds support for these.
OPENOCD_CONFIG_OPTIONS_libusb_y += --enable-jlink
OPENOCD_CONFIG_OPTIONS_libusb_y += --enable-usbprog
OPENOCD_CONFIG_OPTIONS_libusb_y += --enable-rlink
OPENOCD_CONFIG_OPTIONS_libusb_y += --enable-vsllink
OPENOCD_CONFIG_OPTIONS_libusb_y += --enable-usbprog
#========================================
# EXPLICITY NOT SUPPORTED INTERFACES
#
# zy1000.c
# This is a standalone hardware box
# it is *NOT* a cygwin thing.
#
# at91rm9200.c
# This is a uC/Linux (or linux) that
# runs uC/Linux and uses the gpio pins
# to bit-bang JTAG stuff.
#
# ep93xx.c
# Just like at91rm9200 - different chip.
#========================================
# Build OPENOCD config options...
# Always enable "dummy"
OPENOCD_CONFIG_OPTIONS += --enable-dummy
#
# Today: Cannot enable 'oocd_trace' on cygwin.
# it assumes/uses termios functions like
# cfmakeraw() which do not exist on cygwin.
#
#OPENOCD_CONFIG_OPTIONS += --enable-oocd-trace
#
# Add printer options..
OPENOCD_CONFIG_OPTIONS += ${OPENOCD_CONFIG_OPTIONS_printer_${X86_PRINTER_PORT}}
# Add the FTD2232 based options.
OPENOCD_CONFIG_OPTIONS += ${OPENOCD_CONFIG_OPTIONS_ft2232_${FT2232_DRIVER}}
# Add LIBUSB based options.
OPENOCD_CONFIG_OPTIONS += ${OPENOCD_CONFIG_OPTIONS_libusb_${USE_LIBUSB}}
#========================================
# WARNING... the file on the ftdi chip site has a SPACE in the filename GRRR!!!
# We fix that with the "-O" option to wget.
FTD2XX_WIN32_VERSION=2.04.14
FTD2XX_WIN32_DIR = ${HERE}/ftd2xx.win32
FTD2XX_ZIPFILE_LOCAL=${VIRGINS}/cdm.${FTD2XX_WIN32_VERSION}.zip
# Damn thing has a space in the F-ing filename!
FTD2XX_ZIPFILE_URL ="http://www.ftdichip.com/Drivers/CDM/CDM ${FTD2XX_WIN32_VERSION}.zip"
#========================================
# LIBCONFUSE - used by LIBFTDI..
LIBCONFUSE_VERSION=2.5
LIBCONFUSE_TARFILE_LOCAL=${VIRGINS}/confuse-${LIBCONFUSE_VERSION}.tar.gz
LIBCONFUSE_TARFILE_URL =http://www.intra2net.com/de/produkte/opensource/ftdi/TGZ/confuse-${LIBCONFUSE_VERSION}.tar.gz
LIBCONFUSE_SRC_DIR =${HERE}/confuse-${LIBCONFUSE_VERSION}
LIBCONFUSE_BUILD_DIR =${HERE}/confuse-build
#========================================
# LIBFTDI... (which uses libusb, and libconfuse)
LIBFTDI_VERSION=0.14
LIBFTDI_TARFILE_LOCAL = ${VIRGINS}/libftdi-${LIBFTDI_VERSION}.tar.gz
LIBFTDI_TARFILE_URL = http://www.intra2net.com/de/produkte/opensource/ftdi/TGZ/libftdi-${LIBFTDI_VERSION}.tar.gz
LIBFTDI_SRC_DIR = ${HERE}/libftdi-${LIBFTDI_VERSION}
LIBFTDI_BUILD_DIR= ${HERE}/libftdi-build
#========================================
# Finally - OpenOCD...
#
OPENOCD_BUILD_DIR =${HERE}/openocd-build
OPENOCD_SRC_DIR =${HERE}/openocd
#========================================
# END ..
#========================================