zcy
/
tinyriscv-openocd
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
tinyriscv-openocd/tcl/target/ks869x.cfg

35 lines
721 B
INI
Raw Normal View History

KS869x: add new target This patch adds Micrel's KS869x target. The configuration was taken from http://www.mmnt.net/db/0/0/www.micrel.com/ethernet/8695 - Micrel's FTP server i.e. their OpenOCD 7.0 package. The only change compared to the original file is the removal of reset configuration, as it belongs to the board configuration. Change-Id: Ic8509aa5fe5ce3166a3129e1c055280a3b2b9312 Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com> Reviewed-on: http://openocd.zylin.com/2125 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2014-05-05 15:36:27 +00:00
# ARM920T CPU
if { [info exists CHIPNAME] } {
set _CHIPNAME $CHIPNAME
} else {
set _CHIPNAME ks869x
}
if { [info exists ENDIAN] } {
set _ENDIAN $ENDIAN
} else {
set _ENDIAN little
}
if { [info exists CPUTAPID] } {
set _CPUTAPID $CPUTAPID
} else {
set _CPUTAPID 0x00922f0f
}
adapter_khz 6000
# jtag scan chain
jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
set _TARGETNAME $_CHIPNAME.cpu
target: Remove "-variant" argument Remove this underutilized feature. Despite the fact that a lot of configs specifies a arbitrary "variant", only the xscale target actually defines any. In the case of xscale, the use of -variant is dubious since 1) it's used as a redundant irlen specifier, 2) it carries a comment that it doesn't really need it and 3) only two xscale configs even specify it. If there's a future target that needs a variant set, a target specific option could be added when needed. Change-Id: I1ba25a946f0d80872cbd96ddcc48f92695c4ae20 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/2283 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-09-08 20:11:02 +00:00
target create $_TARGETNAME arm920t -endian $_ENDIAN -chain-position $_TARGETNAME
KS869x: add new target This patch adds Micrel's KS869x target. The configuration was taken from http://www.mmnt.net/db/0/0/www.micrel.com/ethernet/8695 - Micrel's FTP server i.e. their OpenOCD 7.0 package. The only change compared to the original file is the removal of reset configuration, as it belongs to the board configuration. Change-Id: Ic8509aa5fe5ce3166a3129e1c055280a3b2b9312 Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com> Reviewed-on: http://openocd.zylin.com/2125 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2014-05-05 15:36:27 +00:00
$_TARGETNAME configure -work-area-phys 0x20000 -work-area-size 0x20000 -work-area-backup 0
# speed up memory downloads
arm7_9 fast_memory_access enable
arm7_9 dcc_downloads enable