tinyriscv-openocd/tcl/target/ti-cjtag.cfg

33 lines
1.3 KiB
INI
Raw Normal View History

# A start sequence to change from cJTAG to 4-pin JTAG
# This is needed for CC2538 and CC26xx to be able to communicate through JTAG
# Read section 6.3 in http://www.ti.com/lit/pdf/swru319 for more information.
proc ti_cjtag_to_4pin_jtag {jrc} {
# Bypass
irscan $jrc 0x3f -endstate RUN/IDLE
# Two zero bit scans and a one bit drshift
pathmove RUN/IDLE DRSELECT DRCAPTURE DREXIT1 DRPAUSE
pathmove DRPAUSE DREXIT2 DRUPDATE RUN/IDLE
pathmove RUN/IDLE DRSELECT DRCAPTURE DREXIT1 DRPAUSE
pathmove DRPAUSE DREXIT2 DRUPDATE RUN/IDLE
pathmove RUN/IDLE DRSELECT DRCAPTURE DREXIT1 DRPAUSE
pathmove DRPAUSE DREXIT2 DRSHIFT DREXIT1 DRUPDATE RUN/IDLE
pathmove RUN/IDLE DRSELECT DRCAPTURE DREXIT1 DRPAUSE
# A two bit drhift and a 9 bit drshift
pathmove DRPAUSE DREXIT2 DRSHIFT DRSHIFT DREXIT1 DRUPDATE RUN/IDLE
pathmove RUN/IDLE DRSELECT DRCAPTURE DREXIT1 DRPAUSE
pathmove DRPAUSE DREXIT2 DRSHIFT DRSHIFT DREXIT1 DRPAUSE
pathmove DRPAUSE DREXIT2 DRSHIFT DRSHIFT DREXIT1 DRPAUSE
pathmove DRPAUSE DREXIT2 DRSHIFT DRSHIFT DREXIT1 DRPAUSE
pathmove DRPAUSE DREXIT2 DRSHIFT DRSHIFT DREXIT1 DRPAUSE
pathmove DRPAUSE DREXIT2 DRSHIFT DREXIT1 DRPAUSE
pathmove DRPAUSE DREXIT2 DRUPDATE RUN/IDLE
pathmove RUN/IDLE DRSELECT DRCAPTURE DREXIT1 DRPAUSE
# Bypass
irscan $jrc 0x3f -endstate RUN/IDLE
# Set ICEPick IDCODE in data register
irscan $jrc 0x04 -endstate RUN/IDLE
}