zcy
/
tinyriscv-openocd
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
tinyriscv-openocd/tcl/board/stm320518_eval_stlink.cfg

20 lines
413 B
INI
Raw Normal View History

cfg: add stm320518-eval onboard stlink config Change-Id: Ie92a87ce077c538fdd04af37c798e0a8054b423a Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/610 Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Tested-by: jenkins Reviewed-by: Xiaofan <xiaofanc@gmail.com>
2012-05-03 15:09:09 +00:00
# STM320518-EVAL: This is an STM32F0 eval board with a single STM32F051R8T6
# (64KB) chip.
# http://www.st.com/internet/evalboard/product/252994.jsp
#
# This is for using the onboard STLINK/V2
source [find interface/stlink-v2.cfg]
Allow transports to override the selected target (hla configs unification) This should allow to share common configs for both regular access and high-level adapters. Use the newly-added functionality in stlink and icdi drivers, amend the configs accordingly. Runtime-tested with a TI tm4c123g board. Change-Id: Ibb88266a4ca25f06f6c073e916c963f017447bad Signed-off-by: Paul Fertser <fercerpav@gmail.com> [gus@projectgus.com: context-specific deprecation warnings] Signed-off-by: Angus Gratton <gus@projectgus.com> [andrew.smirnov@gmail.com: additional nrf51.cfg mods] Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Tested-by: Andrey Skvortsov <andrej.skvortzov@gmail.com> Reviewed-on: http://openocd.zylin.com/1664 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-09-28 10:23:15 +00:00
transport select hla_swd
cfg: add stm320518-eval onboard stlink config Change-Id: Ie92a87ce077c538fdd04af37c798e0a8054b423a Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/610 Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Tested-by: jenkins Reviewed-by: Xiaofan <xiaofanc@gmail.com>
2012-05-03 15:09:09 +00:00
# increase working area to 8KB
set WORKAREASIZE 0x2000
# chip name
set CHIPNAME STM32F051R8T6
Allow transports to override the selected target (hla configs unification) This should allow to share common configs for both regular access and high-level adapters. Use the newly-added functionality in stlink and icdi drivers, amend the configs accordingly. Runtime-tested with a TI tm4c123g board. Change-Id: Ibb88266a4ca25f06f6c073e916c963f017447bad Signed-off-by: Paul Fertser <fercerpav@gmail.com> [gus@projectgus.com: context-specific deprecation warnings] Signed-off-by: Angus Gratton <gus@projectgus.com> [andrew.smirnov@gmail.com: additional nrf51.cfg mods] Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Tested-by: Andrey Skvortsov <andrej.skvortzov@gmail.com> Reviewed-on: http://openocd.zylin.com/1664 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-09-28 10:23:15 +00:00
source [find target/stm32f0x.cfg]
Use hardware reset and connect under reset on boards with ST-LINK/V2, as now it is supported. Change-Id: Id3b2ca9a2270974a5f453323f9057ecece400c94 Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-on: http://openocd.zylin.com/609 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-05-01 17:47:28 +00:00
cfg: add srst_nogate to the supported targets, remove from board configs It depends on the particular target whether it can work with SRST asserted or not, so this belongs to the target config rather than the board config. Also, this allows for simple openocd -f myboard.cfg -c "reset_config connect_assert_srst" command to be used whenever a user feels a need to connect to an unresponsive target. Change-Id: I3d8da9ae47088fc0c75a20bfdd20074be1014de0 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2459 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-01-10 10:19:26 +00:00
reset_config srst_only