tinyriscv-openocd/tcl/target/lpc2378.cfg

22 lines
1002 B
INI
Raw Normal View History

# NXP LPC2378 ARM7TDMI-S with 512kB flash (8kB used by bootloader) and 56kB SRAM (16kB for ETH, 8kB for DMA), clocked with 4MHz internal oscillator
source [find target/lpc2xxx.cfg]
# parameters:
# - core_freq_khz - frequency of core in kHz during flashing, usually equal to connected crystal or internal oscillator, e.g. 12000
# - adapter_freq_khz - frequency of debug adapter in kHz, should be 8x slower than core_freq_khz, e.g. 1000
proc setup_lpc2378 {core_freq_khz adapter_freq_khz} {
# 504kB flash and 32kB SRAM
# setup_lpc2xxx <chip_name> <cputapid> <flash_size> <flash_variant> <workarea_size> <core_freq_khz> <adapter_freq_khz>
setup_lpc2xxx lpc2378 0x4f1f0f0f 0x7e000 lpc2000_v2 0x8000 $core_freq_khz $adapter_freq_khz
}
proc init_targets {} {
# default to core clocked with 4MHz internal oscillator
echo "Warning - assuming default core clock 4MHz! Flashing may fail if actual core clock is different."
# setup_lpc2378 <core_freq_khz> <adapter_freq_khz>
setup_lpc2378 4000 500
}