tinyriscv-openocd/tcl/interface/altera-usb-blaster2.cfg

#
# Altera USB-Blaster II
#

interface usb_blaster
usb_blaster_vid_pid 0x09fb 0x6010 0x09fb 0x6810
usb_blaster_lowlevel_driver ublast2
usb_blaster_firmware /path/to/quartus/blaster_6810.hex
jtag/drivers: add USB-Blaster II This patchs adds a new access driver for the existing USB-Blaster interface driver. This interface (as it is build-in on the sockit development board) is composed of a Cypress EZ-USB plus a CPLD. The Cypress chip as an embedded 8051 microcontroller. When it's powered up, the firmware is downloaded to the chip then the device is disconnected and reconnected with the new firmware. The USB-Blaster II protocol is almost identicial to the old one. The only difference is that you need to send a 0x5F before read TDO back. This command seems to copy TDO buffer datas to the endpoint buffer. Driver will be auto enabled if libusb-1.0 is detected. Change-Id: I562a720a68cb4dcabeab791947d5d38776cb70fa Signed-off-by: Franck Jullien <franck.jullien@gmail.com> Reviewed-on: http://openocd.zylin.com/1791 Tested-by: jenkins Reviewed-by: Robert Jarzmik <robert.jarzmik@free.fr> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> 2013-11-03 16:31:44 +00:00			`#`
			`# Altera USB-Blaster II`
			`#`

			`interface usb_blaster`
			`usb_blaster_vid_pid 0x09fb 0x6010 0x09fb 0x6810`
			`usb_blaster_lowlevel_driver ublast2`
			`usb_blaster_firmware /path/to/quartus/blaster_6810.hex`