tinyriscv-openocd/tcl/board/csb732.cfg

72 lines
1.4 KiB
INI
Raw Normal View History

# The Cogent CSB732 board has a single i.MX35 chip
source [find target/imx35.cfg]
# Determined by trial and error
reset_config trst_and_srst combined
adapter_nsrst_delay 200
jtag_ntrst_delay 200
$_TARGETNAME configure -event gdb-attach { reset init }
$_TARGETNAME configure -event reset-init { csb732_init }
# Bare-bones initialization of core clocks and SDRAM
proc csb732_init { } {
# Disable fast writing only for init
memwrite burst disable
# All delay loops are omitted.
# We assume the interpreter latency is enough.
# Allow access to all coprocessors
arm mcr 15 0 15 1 0 0x2001
# Disable MMU, caches, write buffer
arm mcr 15 0 1 0 0 0x78
# Grant manager access to all domains
arm mcr 15 0 3 0 0 0xFFFFFFFF
# Set ARM clock to 532 MHz, AHB to 133 MHz
mww 0x53F80004 0x1000
# Set core clock to 2 * 24 MHz * (11 + 1/12) = 532 MHz
mww 0x53F8001C 0xB2C01
set ESDMISC 0xB8001010
set ESDCFG0 0xB8001004
set ESDCTL0 0xB8001000
# Enable DDR
mww $ESDMISC 0x4
# Timing
mww $ESDCFG0 0x007fff3f
# CS0
mww $ESDCTL0 0x92120080
# Precharge all dummy write
mww 0x80000400 0
# Enable CS) auto-refresh
mww $ESDCTL0 0xA2120080
# Refresh twice (dummy writes)
mww 0x80000000 0
mww 0x80000000 0
# Enable CS0 load mode register
mww $ESDCTL0 0xB2120080
# Dummy writes
mwb 0x80000033 0x01
mwb 0x81000000 0x01
mww $ESDCTL0 0x82226080
mww 0x80000000 0
# Re-enable fast writing
memwrite burst enable
}