tinyriscv-openocd/tcl/board/spear300evb.cfg

45 lines
1.2 KiB
INI
Raw Normal View History

# Configuration for the ST SPEAr300 Evaluation board
# EVALSPEAr300 Rev. 1.0
# http://www.st.com/spear
#
# Date: 2010-11-27
# Author: Antonio Borneo <borneo.antonio@gmail.com>
# The standard board has JTAG SRST not connected.
# This script targets such boards using quirky code to bypass the issue.
source [find mem_helper.tcl]
source [find target/spear3xx.cfg]
source [find chip/st/spear/spear3xx_ddr.tcl]
source [find chip/st/spear/spear3xx.tcl]
arm7_9 dcc_downloads enable
arm7_9 fast_memory_access enable
# Serial NOR on SMI CS0. 8Mbyte.
set _FLASHNAME1 $_CHIPNAME.snor
flash bank $_FLASHNAME1 stmsmi 0xf8000000 0 0 0 $_TARGETNAME
if { [info exists BOARD_HAS_SRST] } {
# Modified board has SRST on JTAG connector
reset_config trst_and_srst separate srst_gates_jtag \
trst_push_pull srst_open_drain
} else {
# Standard board has no SRST on JTAG connector
reset_config trst_only separate srst_gates_jtag trst_push_pull
source [find chip/st/spear/quirk_no_srst.tcl]
}
$_TARGETNAME configure -event reset-init { spear300evb_init }
proc spear300evb_init {} {
reg pc 0xffff0020; # loop forever
sp3xx_clock_default
sp3xx_common_init
sp3xx_ddr_init "mt47h64m16_3_333_cl5_async"
sp300_init
}