tinyriscv-openocd/tcl/target/stellaris_icdi.cfg

35 lines
822 B
INI
Raw Normal View History

#
# lm3s icdi pseudo target
#
if { [info exists CHIPNAME] } {
set _CHIPNAME $CHIPNAME
} else {
set _CHIPNAME lm3s
}
# Work-area is a space in RAM used for flash programming
# By default use 16kB
if { [info exists WORKAREASIZE] } {
set _WORKAREASIZE $WORKAREASIZE
} else {
set _WORKAREASIZE 0x4000
}
#
# possible value are hla_jtag
# currently swd is not supported
#
transport select hla_jtag
# do not check id as icdi currently does not support it
hla newtap $_CHIPNAME cpu -expected-id 0
set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME hla_target -chain-position $_TARGETNAME
$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0
# flash configuration ... autodetects sizes, autoprobed
flash bank $_CHIPNAME.flash stellaris 0 0 0 0 $_TARGETNAME