tinyriscv-openocd/tcl/target/stm32_stlink.cfg

49 lines
1.1 KiB
INI
Raw Normal View History

#
# stm32 stlink pseudo target
#
if { [info exists CHIPNAME] } {
set _CHIPNAME $CHIPNAME
} else {
set _CHIPNAME stm32f1x
}
# Work-area is a space in RAM used for flash programming
# By default use 16kB
if { [info exists WORKAREASIZE] } {
set _WORKAREASIZE $WORKAREASIZE
} else {
set _WORKAREASIZE 0x4000
}
if { [info exists CPUTAPID] } {
set _CPUTAPID $CPUTAPID
} else {
# this is the SW-DP tap id not the jtag tap id
set _CPUTAPID 0x1ba01477
}
if { [info exists TRANSPORT] } {
set _TRANSPORT $TRANSPORT
if { $TRANSPORT == "stlink_jtag" } {
if { [info exists CPUTAPID] == 0 } {
# jtag requires us to use the jtag tap id
set _CPUTAPID 0x3ba00477
}
}
} else {
set _TRANSPORT stlink_swd
}
#
# possibles value are stlink_swd or stlink_jtag
#
transport select $_TRANSPORT
stlink newtap $_CHIPNAME cpu -expected-id $_CPUTAPID
set _TARGETNAME $_CHIPNAME.cpu
target create $_TARGETNAME stm32_stlink -chain-position $_TARGETNAME
$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0