tinyriscv-openocd/tcl/chip/atmel/at91/at91_pmc.cfg

114 lines
6.4 KiB
INI
Raw Normal View History

set AT91_PMC_SCER [expr ($AT91_PMC + 0x00)] ;# System Clock Enable Register
set AT91_PMC_SCDR [expr ($AT91_PMC + 0x04)] ;# System Clock Disable Register
set AT91_PMC_SCSR [expr ($AT91_PMC + 0x08)] ;# System Clock Status Register
set AT91_PMC_PCK [expr (1 << 0)] ;# Processor Clock
set AT91RM9200_PMC_UDP [expr (1 << 1)] ;# USB Devcice Port Clock [AT91RM9200 only]
set AT91RM9200_PMC_MCKUDP [expr (1 << 2)] ;# USB Device Port Master Clock Automatic Disable on Suspend [AT91RM9200 only]
set AT91CAP9_PMC_DDR [expr (1 << 2)] ;# DDR Clock [CAP9 revC & some SAM9 only]
set AT91RM9200_PMC_UHP [expr (1 << 4)] ;# USB Host Port Clock [AT91RM9200 only]
set AT91SAM926x_PMC_UHP [expr (1 << 6)] ;# USB Host Port Clock [AT91SAM926x only]
set AT91CAP9_PMC_UHP [expr (1 << 6)] ;# USB Host Port Clock [AT91CAP9 only]
set AT91SAM926x_PMC_UDP [expr (1 << 7)] ;# USB Devcice Port Clock [AT91SAM926x only]
set AT91_PMC_PCK0 [expr (1 << 8)] ;# Programmable Clock 0
set AT91_PMC_PCK1 [expr (1 << 9)] ;# Programmable Clock 1
set AT91_PMC_PCK2 [expr (1 << 10)] ;# Programmable Clock 2
set AT91_PMC_PCK3 [expr (1 << 11)] ;# Programmable Clock 3
set AT91_PMC_HCK0 [expr (1 << 16)] ;# AHB Clock (USB host) [AT91SAM9261 only]
set AT91_PMC_HCK1 [expr (1 << 17)] ;# AHB Clock (LCD) [AT91SAM9261 only]
set AT91_PMC_PCER [expr ($AT91_PMC + 0x10)] ;# Peripheral Clock Enable Register
set AT91_PMC_PCDR [expr ($AT91_PMC + 0x14)] ;# Peripheral Clock Disable Register
set AT91_PMC_PCSR [expr ($AT91_PMC + 0x18)] ;# Peripheral Clock Status Register
set AT91_CKGR_UCKR [expr ($AT91_PMC + 0x1C)] ;# UTMI Clock Register [some SAM9, CAP9]
set AT91_PMC_UPLLEN [expr (1 << 16)] ;# UTMI PLL Enable
set AT91_PMC_UPLLCOUNT [expr (0xf << 20)] ;# UTMI PLL Start-up Time
set AT91_PMC_BIASEN [expr (1 << 24)] ;# UTMI BIAS Enable
set AT91_PMC_BIASCOUNT [expr (0xf << 28)] ;# UTMI BIAS Start-up Time
set AT91_CKGR_MOR [expr ($AT91_PMC + 0x20)] ;# Main Oscillator Register [not on SAM9RL]
set AT91_PMC_MOSCEN [expr (1 << 0)] ;# Main Oscillator Enable
set AT91_PMC_OSCBYPASS [expr (1 << 1)] ;# Oscillator Bypass [SAM9x, CAP9]
set AT91_PMC_OSCOUNT [expr (0xff << 8)] ;# Main Oscillator Start-up Time
set AT91_CKGR_MCFR [expr ($AT91_PMC + 0x24)] ;# Main Clock Frequency Register
set AT91_PMC_MAINF [expr (0xffff << 0)] ;# Main Clock Frequency
set AT91_PMC_MAINRDY [expr (1 << 16)] ;# Main Clock Ready
set AT91_CKGR_PLLAR [expr ($AT91_PMC + 0x28)] ;# PLL A Register
set AT91_CKGR_PLLBR [expr ($AT91_PMC + 0x2c)] ;# PLL B Register
set AT91_PMC_DIV [expr (0xff << 0)] ;# Divider
set AT91_PMC_PLLCOUNT [expr (0x3f << 8)] ;# PLL Counter
set AT91_PMC_OUT [expr (3 << 14)] ;# PLL Clock Frequency Range
set AT91_PMC_MUL [expr (0x7ff << 16)] ;# PLL Multiplier
set AT91_PMC_USBDIV [expr (3 << 28)] ;# USB Divisor (PLLB only)
set AT91_PMC_USBDIV_1 [expr (0 << 28)]
set AT91_PMC_USBDIV_2 [expr (1 << 28)]
set AT91_PMC_USBDIV_4 [expr (2 << 28)]
set AT91_PMC_USB96M [expr (1 << 28)] ;# Divider by 2 Enable (PLLB only)
set AT91_PMC_PLLA_WR_ERRATA [expr (1 << 29)] ;# Bit 29 must always be set to 1 when programming the CKGR_PLLAR register
set AT91_PMC_MCKR [expr ($AT91_PMC + 0x30)] ;# Master Clock Register
set AT91_PMC_CSS [expr (3 << 0)] ;# Master Clock Selection
set AT91_PMC_CSS_SLOW [expr (0 << 0)]
set AT91_PMC_CSS_MAIN [expr (1 << 0)]
set AT91_PMC_CSS_PLLA [expr (2 << 0)]
set AT91_PMC_CSS_PLLB [expr (3 << 0)]
set AT91_PMC_CSS_UPLL [expr (3 << 0)] ;# [some SAM9 only]
set AT91_PMC_PRES [expr (7 << 2)] ;# Master Clock Prescaler
set AT91_PMC_PRES_1 [expr (0 << 2)]
set AT91_PMC_PRES_2 [expr (1 << 2)]
set AT91_PMC_PRES_4 [expr (2 << 2)]
set AT91_PMC_PRES_8 [expr (3 << 2)]
set AT91_PMC_PRES_16 [expr (4 << 2)]
set AT91_PMC_PRES_32 [expr (5 << 2)]
set AT91_PMC_PRES_64 [expr (6 << 2)]
set AT91_PMC_MDIV [expr (3 << 8)] ;# Master Clock Division
set AT91RM9200_PMC_MDIV_1 [expr (0 << 8)] ;# [AT91RM9200 only]
set AT91RM9200_PMC_MDIV_2 [expr (1 << 8)]
set AT91RM9200_PMC_MDIV_3 [expr (2 << 8)]
set AT91RM9200_PMC_MDIV_4 [expr (3 << 8)]
set AT91SAM9_PMC_MDIV_1 [expr (0 << 8)] ;# [SAM9,CAP9 only]
set AT91SAM9_PMC_MDIV_2 [expr (1 << 8)]
set AT91SAM9_PMC_MDIV_4 [expr (2 << 8)]
set AT91SAM9_PMC_MDIV_6 [expr (3 << 8)] ;# [some SAM9 only]
set AT91SAM9_PMC_MDIV_3 [expr (3 << 8)] ;# [some SAM9 only]
set AT91_PMC_PDIV [expr (1 << 12)] ;# Processor Clock Division [some SAM9 only]
set AT91_PMC_PDIV_1 [expr (0 << 12)]
set AT91_PMC_PDIV_2 [expr (1 << 12)]
set AT91_PMC_PLLADIV2 [expr (1 << 12)] ;# PLLA divisor by 2 [some SAM9 only]
set AT91_PMC_PLLADIV2_OFF [expr (0 << 12)]
set AT91_PMC_PLLADIV2_ON [expr (1 << 12)]
set AT91_PMC_USB [expr ($AT91_PMC + 0x38)] ;# USB Clock Register [some SAM9 only]
set AT91_PMC_USBS [expr (0x1 << 0)] ;# USB OHCI Input clock selection
set AT91_PMC_USBS_PLLA [expr (0 << 0)]
set AT91_PMC_USBS_UPLL [expr (1 << 0)]
set AT91_PMC_OHCIUSBDIV [expr (0xF << 8)] ;# Divider for USB OHCI Clock
;# set AT91_PMC_PCKR(n) [expr ($AT91_PMC + 0x40 + ((n) * 4))] ;# Programmable Clock 0-N Registers
set AT91_PMC_CSSMCK [expr (0x1 << 8)] ;# CSS or Master Clock Selection
set AT91_PMC_CSSMCK_CSS [expr (0 << 8)]
set AT91_PMC_CSSMCK_MCK [expr (1 << 8)]
set AT91_PMC_IER [expr ($AT91_PMC + 0x60)] ;# Interrupt Enable Register
set AT91_PMC_IDR [expr ($AT91_PMC + 0x64)] ;# Interrupt Disable Register
set AT91_PMC_SR [expr ($AT91_PMC + 0x68)] ;# Status Register
set AT91_PMC_MOSCS [expr (1 << 0)] ;# MOSCS Flag
set AT91_PMC_LOCKA [expr (1 << 1)] ;# PLLA Lock
set AT91_PMC_LOCKB [expr (1 << 2)] ;# PLLB Lock
set AT91_PMC_MCKRDY [expr (1 << 3)] ;# Master Clock
set AT91_PMC_LOCKU [expr (1 << 6)] ;# UPLL Lock [some SAM9, AT91CAP9 only]
set AT91_PMC_OSCSEL [expr (1 << 7)] ;# Slow Clock Oscillator [AT91CAP9 revC only]
set AT91_PMC_PCK0RDY [expr (1 << 8)] ;# Programmable Clock 0
set AT91_PMC_PCK1RDY [expr (1 << 9)] ;# Programmable Clock 1
set AT91_PMC_PCK2RDY [expr (1 << 10)] ;# Programmable Clock 2
set AT91_PMC_PCK3RDY [expr (1 << 11)] ;# Programmable Clock 3
set AT91_PMC_IMR [expr ($AT91_PMC + 0x6c)] ;# Interrupt Mask Register
set AT91_PMC_PROT [expr ($AT91_PMC + 0xe4)] ;# Protect Register [AT91CAP9 revC only]
set AT91_PMC_PROTKEY 0x504d4301 ;# Activation Code
set AT91_PMC_VER [expr ($AT91_PMC + 0xfc)] ;# PMC Module Version [AT91CAP9 only]