zcy
/
tinyriscv-openocd
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
tinyriscv-openocd/tcl/board/ek-lm3s3748.cfg

15 lines
352 B
INI
Raw Normal View History

cfg: update ti/stellaris url's Change-Id: I96f17c5ea2be506a6b88434616ca52c3e392868a Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/879 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-10-02 13:33:06 +00:00
#
# TI/Luminary Stellaris lm3s3748 Evaluation Kits
#
# http://www.ti.com/tool/ek-lm3s3748
#
David Brownell <david-b@pacbell.net> split EK board support out from the target CPU support . git-svn-id: svn://svn.berlios.de/openocd/trunk@2504 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-07-10 07:21:12 +00:00
Fix Luminary FT2232 layout docs/configs Most of this patch updates documentation and comments for various Luminary boards, supporting two bug fixes by helping to make sense of the current mess: - Recent rev C lm3s811 eval boards didn't work. They must use the ICDI layout, which sets up some signals that the older boards didn't need. This is actually safe and appropriate for *all* recent boards ... so just make "luminary.cfg" use the ICDI layout. - "luminary-lm3s811.cfg", was previously unusable! No VID/PID; and the wrong vendor string. Make it work, but reserve it for older boards where the ICDI layout is wrong. - Default the LM3748 eval board to "luminary.cfg", like the other boards. If someone uses an external JTAG adapter, all boards will use the same workaround (override that default). The difference between the two FT2232 layouts is that eventually the EVB layout will fail cleanly when asked to enable SWO trace, but the ICDI layout will as cleanly be able to enable it. Folk using "luminary.cfg" with Rev B boards won't see anything going wrong until SWO support is (someday) added. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-12-28 20:59:47 +00:00
# NOTE: using the on-board FT2232 JTAG/SWD/SWO interface is optional!
Update comments for some Stellaris EK boards. These don't need to use the on-board debuggers in JTAG mode. Off-board is OK, as would be SWD mode. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-08-16 04:36:52 +00:00
# so is using it in JTAG mode, as done here.
tcl/board: fix all the remaining boards that were sourcing ft2232 configs This was reported in https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=751372 . Change-Id: I258f3d40593ff2966ce3ca61c13a23699d1b162f Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2230 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-07-28 18:10:45 +00:00
source [find interface/ftdi/luminary.cfg]
David Brownell <david-b@pacbell.net> split EK board support out from the target CPU support . git-svn-id: svn://svn.berlios.de/openocd/trunk@2504 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-07-10 07:21:12 +00:00
cfg: update Luminary config files - Update all Luminary config's to use a common target/stellaris.cfg. - Add Luminary ek-lm3s6965 config. - Increase working area for boards with more ram. Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-08-24 19:50:20 +00:00
# 20k working area
set WORKAREASIZE 0x4000
set CHIPNAME lm3s3748
lm3748: use new Stellaris config file Use the new file, and remove the old target/lm3s3748.cfg one. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-12-15 00:29:53 +00:00
source [find target/stellaris.cfg]