zcy
/
tinyriscv-openocd
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
tinyriscv-openocd/tcl/board/twr-k60f120m.cfg

18 lines
437 B
INI
Raw Permalink Normal View History

kinetis: update support for all program flash granularities Updates the Kinetis NOR flash support to handle all known block and sector sizes. Previously only 2kiB sectors were hard-coded, now all four known combinations non-volatile sector sizes are supported. The premise of separating Kinetis Program Flash (PFLASH) from FlexNVM is also introduced. This means each "block" of flash (in Freescale terms) is treated as a bank in OpenOCD. Correspondingly, the existing board configuration for the TWR-K60M512 eval system is updated to recognize two banks instead of one. A board config for the TWR-K60F120M is also added. Bank and sector erase and programming has been checked with both of the mentioned eval boards. Change-Id: Iae2d10ebf8f548d0a3698df5430bbbe1ccadc58a Signed-off-by: Christopher Kilgour <techie@whiterocker.com> Reviewed-on: http://openocd.zylin.com/663 Tested-by: jenkins Reviewed-by: Mathias Küster <kesmtp@freenet.de> Reviewed-by: Jan Dakinevich <jan.dakinevich@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-05-23 18:05:28 +00:00
#
# Freescale TWRK60F120M development board
#
source [find target/k60.cfg]
$_TARGETNAME configure -event reset-init {
puts "-event reset-init occured"
}
#
tcl/board/twr-k60f120m: remove useless flash bank 0 definition Since the very first flash bank is already defined in target/kx.cfg, there's no sense in repeating it. Reported and tested by Richard Braun. Change-Id: I417b7072b5e6675ddbf824446e7581b8b7da8f4b Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2595 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-03-10 19:27:16 +00:00
# Definitions for the additional 'program flash' banks
# (instructions and/or data)
kinetis: update support for all program flash granularities Updates the Kinetis NOR flash support to handle all known block and sector sizes. Previously only 2kiB sectors were hard-coded, now all four known combinations non-volatile sector sizes are supported. The premise of separating Kinetis Program Flash (PFLASH) from FlexNVM is also introduced. This means each "block" of flash (in Freescale terms) is treated as a bank in OpenOCD. Correspondingly, the existing board configuration for the TWR-K60M512 eval system is updated to recognize two banks instead of one. A board config for the TWR-K60F120M is also added. Bank and sector erase and programming has been checked with both of the mentioned eval boards. Change-Id: Iae2d10ebf8f548d0a3698df5430bbbe1ccadc58a Signed-off-by: Christopher Kilgour <techie@whiterocker.com> Reviewed-on: http://openocd.zylin.com/663 Tested-by: jenkins Reviewed-by: Mathias Küster <kesmtp@freenet.de> Reviewed-by: Jan Dakinevich <jan.dakinevich@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-05-23 18:05:28 +00:00
#
flash bank pflash.1 kinetis 0x00040000 0x40000 0 4 $_TARGETNAME
flash bank pflash.2 kinetis 0x00080000 0x40000 0 4 $_TARGETNAME
flash bank pflash.3 kinetis 0x000c0000 0x40000 0 4 $_TARGETNAME