zcy
/
tinySA
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
tinySA/os/hal/platforms/STM32/spi_lld.c

369 lines
11 KiB
C
Raw Blame History

/*
ChibiOS/RT - Copyright (C) 2006-2007 Giovanni Di Sirio.
This file is part of ChibiOS/RT.
ChibiOS/RT is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
ChibiOS/RT is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
/**
* @file STM32/spi_lld.c
* @brief STM32 SPI subsystem low level driver source.
* @addtogroup STM32_SPI
* @{
*/
#include "ch.h"
#include "hal.h"
#if CH_HAL_USE_SPI || defined(__DOXYGEN__)
/*===========================================================================*/
/* Low Level Driver exported variables. */
/*===========================================================================*/
#if USE_STM32_SPI1 || defined(__DOXYGEN__)
/** @brief SPI1 driver identifier.*/
SPIDriver SPID1;
#endif
#if USE_STM32_SPI2 || defined(__DOXYGEN__)
/** @brief SPI2 driver identifier.*/
SPIDriver SPID2;
#endif
/*===========================================================================*/
/* Low Level Driver local variables. */
/*===========================================================================*/
static uint16_t dummyrx;
static uint16_t dummytx;
/*===========================================================================*/
/* Low Level Driver local functions. */
/*===========================================================================*/
static void spi_stop(SPIDriver *spip) {
/* Stops RX and TX DMA channels.*/
spip->spd_dmarx->CCR = 0;
spip->spd_dmatx->CCR = 0;
/* Stops SPI operations.*/
spip->spd_spi->CR1 &= ~SPI_CR1_SPE;
chSysLockFromIsr();
chSchReadyI(spip->spd_thread);
chSysUnlockFromIsr();
}
static void spi_start_wait(SPIDriver *spip, size_t n,
const void *txbuf, void *rxbuf) {
uint32_t ccr;
/* Common DMA setup.*/
ccr = spip->spd_dmaprio;
if ((spip->spd_config->spc_cr1 & SPI_CR1_DFF) != 0)
ccr |= DMA_CCR1_MSIZE_0 | DMA_CCR1_PSIZE_0; /* 16 bits transfer.*/
/* RX DMA setup.*/
spip->spd_dmarx->CMAR = (uint32_t)rxbuf;
spip->spd_dmarx->CNDTR = (uint32_t)n;
spip->spd_dmarx->CCR |= ccr;
/* TX DMA setup.*/
spip->spd_dmatx->CMAR = (uint32_t)txbuf;
spip->spd_dmatx->CNDTR = (uint32_t)n;
spip->spd_dmatx->CCR |= ccr;
/* DMAs start.*/
spip->spd_dmarx->CCR |= DMA_CCR1_EN;
spip->spd_dmatx->CCR |= DMA_CCR1_EN;
/* SPI enable.*/
chSysLock();
spip->spd_spi->CR1 |= SPI_CR1_SPE;
/* Wait for completion event.*/
spip->spd_thread = currp;
chSchGoSleepS(PRSUSPENDED);
spip->spd_thread = NULL;
chSysUnlock();
}
/*===========================================================================*/
/* Low Level Driver interrupt handlers. */
/*===========================================================================*/
#if USE_STM32_SPI1 || defined(__DOXYGEN__)
/**
* @brief SPI1 RX DMA interrupt handler (channel 2).
*/
CH_IRQ_HANDLER(Vector70) {
CH_IRQ_PROLOGUE();
spi_stop(&SPID1);
if ((DMA1->ISR & DMA_ISR_TEIF2) != 0) {
STM32_SPI1_DMA_ERROR_HOOK();
}
DMA1->IFCR |= DMA_IFCR_CGIF2 | DMA_IFCR_CTCIF2 |
DMA_IFCR_CHTIF2 | DMA_IFCR_CTEIF2;
CH_IRQ_EPILOGUE();
}
/**
* @brief SPI1 TX DMA interrupt handler (channel 3).
*/
CH_IRQ_HANDLER(Vector74) {
CH_IRQ_PROLOGUE();
STM32_SPI1_DMA_ERROR_HOOK();
DMA1->IFCR |= DMA_IFCR_CGIF3 | DMA_IFCR_CTCIF3 |
DMA_IFCR_CHTIF3 | DMA_IFCR_CTEIF3;
CH_IRQ_EPILOGUE();
}
#endif
#if USE_STM32_SPI2 || defined(__DOXYGEN__)
/**
* @brief SPI2 RX DMA interrupt handler (channel 4).
*/
CH_IRQ_HANDLER(Vector78) {
CH_IRQ_PROLOGUE();
spi_stop(&SPID2);
if ((DMA1->ISR & DMA_ISR_TEIF4) != 0) {
STM32_SPI2_DMA_ERROR_HOOK();
}
DMA1->IFCR |= DMA_IFCR_CGIF4 | DMA_IFCR_CTCIF4 |
DMA_IFCR_CHTIF4 | DMA_IFCR_CTEIF4;
CH_IRQ_EPILOGUE();
}
/**
* @brief SPI2 TX DMA interrupt handler (channel 5).
*/
CH_IRQ_HANDLER(Vector7C) {
CH_IRQ_PROLOGUE();
STM32_SPI2_DMA_ERROR_HOOK();
DMA1->IFCR |= DMA_IFCR_CGIF5 | DMA_IFCR_CTCIF5 |
DMA_IFCR_CHTIF5 | DMA_IFCR_CTEIF5;
CH_IRQ_EPILOGUE();
}
#endif
/*===========================================================================*/
/* Low Level Driver exported functions. */
/*===========================================================================*/
/**
* @brief Low level SPI driver initialization.
*/
void spi_lld_init(void) {
dummytx = 0xFFFF;
#if USE_STM32_SPI1
RCC->APB2RSTR = RCC_APB2RSTR_SPI1RST;
RCC->APB2RSTR = 0;
spiObjectInit(&SPID1);
SPID1.spd_thread = NULL;
SPID1.spd_spi = SPI1;
SPID1.spd_dmarx = DMA1_Channel2;
SPID1.spd_dmatx = DMA1_Channel3;
SPID1.spd_dmaprio = STM32_SPI1_DMA_PRIORITY << 12;
GPIOA->CRL = (GPIOA->CRL & 0x000FFFFF) | 0xB4B00000;
#endif
#if USE_STM32_SPI2
RCC->APB1RSTR = RCC_APB1RSTR_SPI2RST;
RCC->APB1RSTR = 0;
spiObjectInit(&SPID2);
SPID2.spd_thread = NULL;
SPID2.spd_spi = SPI2;
SPID2.spd_dmarx = DMA1_Channel4;
SPID2.spd_dmatx = DMA1_Channel5;
SPID2.spd_dmaprio = STM32_SPI2_DMA_PRIORITY << 12;
GPIOB->CRH = (GPIOB->CRH & 0x000FFFFF) | 0xB4B00000;
#endif
}
/**
* @brief Configures and activates the SPI peripheral.
*
* @param[in] spip pointer to the @p SPIDriver object
*/
void spi_lld_start(SPIDriver *spip) {
/* If in stopped state then enables the SPI and DMA clocks.*/
if (spip->spd_state == SPI_STOP) {
#if USE_STM32_SPI1
if (&SPID1 == spip) {
dmaEnable(DMA1_ID); /* NOTE: Must be enabled before the IRQs.*/
NVICEnableVector(DMA1_Channel2_IRQn, STM32_SPI1_IRQ_PRIORITY);
NVICEnableVector(DMA1_Channel3_IRQn, STM32_SPI1_IRQ_PRIORITY);
RCC->APB2ENR |= RCC_APB2ENR_SPI1EN;
}
#endif
#if USE_STM32_SPI2
if (&SPID2 == spip) {
dmaEnable(DMA1_ID); /* NOTE: Must be enabled before the IRQs.*/
NVICEnableVector(DMA1_Channel4_IRQn, STM32_SPI2_IRQ_PRIORITY);
NVICEnableVector(DMA1_Channel5_IRQn, STM32_SPI2_IRQ_PRIORITY);
RCC->APB1ENR |= RCC_APB1ENR_SPI2EN;
}
#endif
}
/* SPI setup.*/
spip->spd_spi->CR1 = spip->spd_config->spc_cr1 | SPI_CR1_MSTR;
spip->spd_spi->CR2 = SPI_CR2_SSOE | SPI_CR2_RXDMAEN | SPI_CR2_TXDMAEN;
/* DMA setup.*/
spip->spd_dmarx->CPAR = (uint32_t)&spip->spd_spi->DR;
spip->spd_dmatx->CPAR = (uint32_t)&spip->spd_spi->DR;
}
/**
* @brief Deactivates the SPI peripheral.
*
* @param[in] spip pointer to the @p SPIDriver object
*/
void spi_lld_stop(SPIDriver *spip) {
/* If in ready state then disables the SPI clock.*/
if (spip->spd_state == SPI_READY) {
#if USE_STM32_SPI1
if (&SPID1 == spip) {
NVICDisableVector(DMA1_Channel2_IRQn);
NVICDisableVector(DMA1_Channel3_IRQn);
dmaDisable(DMA1_ID);
RCC->APB2ENR &= ~RCC_APB2ENR_SPI1EN;
}
#endif
#if USE_STM32_SPI2
if (&SPID2 == spip) {
NVICDisableVector(DMA1_Channel4_IRQn);
NVICDisableVector(DMA1_Channel5_IRQn);
dmaDisable(DMA1_ID);
RCC->APB1ENR &= ~RCC_APB1ENR_SPI2EN;
}
#endif
}
}
/**
* @brief Asserts the slave select signal and prepares for transfers.
*
* @param[in] spip pointer to the @p SPIDriver object
*/
void spi_lld_select(SPIDriver *spip) {
palClearPad(spip->spd_config->spc_ssport, spip->spd_config->spc_sspad);
}
/**
* @brief Deasserts the slave select signal.
* @details The previously selected peripheral is unselected.
*
* @param[in] spip pointer to the @p SPIDriver object
*/
void spi_lld_unselect(SPIDriver *spip) {
palSetPad(spip->spd_config->spc_ssport, spip->spd_config->spc_sspad);
}
/**
* @brief Ignores data on the SPI bus.
* @details This function transmits a series of idle words on the SPI bus and
* ignores the received data. This function can be invoked even
* when a slave select signal has not been yet asserted.
*
* @param[in] spip pointer to the @p SPIDriver object
* @param[in] n number of words to be ignored
*/
void spi_lld_ignore(SPIDriver *spip, size_t n) {
spip->spd_dmarx->CCR = DMA_CCR1_TCIE | DMA_CCR1_TEIE;
spip->spd_dmatx->CCR = DMA_CCR1_DIR | DMA_CCR1_TEIE;
spi_start_wait(spip, n, &dummytx, &dummyrx);
}
/**
* @brief Exchanges data on the SPI bus.
* @details This function performs a simultaneous transmit/receive operation.
*
* @param[in] spip pointer to the @p SPIDriver object
* @param[in] n number of words to be exchanged
* @param[in] txbuf the pointer to the transmit buffer
* @param[out] rxbuf the pointer to the receive buffer
*
* @note The buffers are organized as uint8_t arrays for data sizes below or
* equal to 8 bits else it is organized as uint16_t arrays.
*/
void spi_lld_exchange(SPIDriver *spip, size_t n,
const void *txbuf, void *rxbuf) {
spip->spd_dmarx->CCR = DMA_CCR1_TCIE | DMA_CCR1_MINC | DMA_CCR1_TEIE;
spip->spd_dmatx->CCR = DMA_CCR1_DIR | DMA_CCR1_MINC | DMA_CCR1_TEIE;
spi_start_wait(spip, n, txbuf, rxbuf);
}
/**
* @brief Sends data ever the SPI bus.
*
* @param[in] spip pointer to the @p SPIDriver object
* @param[in] n number of words to send
* @param[in] txbuf the pointer to the transmit buffer
*
* @note The buffers are organized as uint8_t arrays for data sizes below or
* equal to 8 bits else it is organized as uint16_t arrays.
*/
void spi_lld_send(SPIDriver *spip, size_t n, const void *txbuf) {
spip->spd_dmarx->CCR = DMA_CCR1_TCIE | DMA_CCR1_TEIE;
spip->spd_dmatx->CCR = DMA_CCR1_DIR | DMA_CCR1_MINC | DMA_CCR1_TEIE;
spi_start_wait(spip, n, txbuf, &dummyrx);
}
/**
* @brief Receives data from the SPI bus.
*
* @param[in] spip pointer to the @p SPIDriver object
* @param[in] n number of words to receive
* @param[out] rxbuf the pointer to the receive buffer
*
* @note The buffers are organized as uint8_t arrays for data sizes below or
* equal to 8 bits else it is organized as uint16_t arrays.
*/
void spi_lld_receive(SPIDriver *spip, size_t n, void *rxbuf) {
spip->spd_dmarx->CCR = DMA_CCR1_TCIE | DMA_CCR1_MINC | DMA_CCR1_TEIE;
spip->spd_dmatx->CCR = DMA_CCR1_DIR | DMA_CCR1_TEIE;
spi_start_wait(spip, n, &dummytx, rxbuf);
}
#endif /* CH_HAL_USE_SPI */
/** @} */
Reference in New Issue View Git Blame Copy Permalink