zcy
/
tinySA
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
tinySA/testhal/AVR/ADC
History
efti 7880778f17 AVR: improvements and fixes 
- HAL prescaler selection logic
- Added ADC support
- SPI improvements


git-svn-id: svn://svn.code.sf.net/p/chibios/svn/trunk@5893 35acf78f-673a-0410-8e92-d51de3d6d3f4
 		2013-06-27 11:28:02 +00:00
..
chconf.h AVR: improvements and fixes 2013-06-27 11:28:02 +00:00
halconf.h AVR: improvements and fixes 2013-06-27 11:28:02 +00:00
main.c AVR: improvements and fixes 2013-06-27 11:28:02 +00:00
mcuconf.h AVR: improvements and fixes 2013-06-27 11:28:02 +00:00
readme.txt AVR: improvements and fixes 2013-06-27 11:28:02 +00:00

readme.txt

This file contains invisible Unicode characters!

This file contains invisible Unicode characters that may be processed differently from what appears below. If your use case is intentional and legitimate, you can safely ignore this warning. Use the Escape button to reveal hidden characters.

*****************************************************************************
** ChibiOS/RT port for Atmel AVR ATmega1280.                                **
*****************************************************************************

** TARGET **

The demo runs on an Arduino Mega board.

** The Demo **

The demo currently just prints the TestThread output on Serial0, which is
available on the board USB connector (FT232 converter), and toggles the LED
on PB7 (pin 13 on Arduino IDE) every second.

** Build Procedure **

The demo was built using the GCC AVR toolchain. It should build with WinAVR too!

** Notes **

This demo runs natively so the Arduino bootloader must be removed and the FUSEs
reprogrammed. The values used for fuses are LFUSE=0xe7 and HFUSE=0x99.