zcy
/
tinySA
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
tinySA/os/hal/platforms/SPC5xx/eTimer_v1/icu_lld.c

1367 lines
39 KiB
C
Raw Blame History

/*
* Licensed under ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
/**
* @file eTimer_v1/icu_lld.c
* @brief SPC5xx low level ICU driver code.
*
* @addtogroup ICU
* @{
*/
#include "ch.h"
#include "hal.h"
#if HAL_USE_ICU || defined(__DOXYGEN__)
/*===========================================================================*/
/* Driver local definitions. */
/*===========================================================================*/
/*===========================================================================*/
/* Driver exported variables. */
/*===========================================================================*/
/**
* @brief ICUD1 driver identifier.
* @note The driver ICUD1 allocates the complex timer SMOD0 when enabled.
*/
#if SPC5_ICU_USE_SMOD0 || defined(__DOXYGEN__)
ICUDriver ICUD1;
#endif
/**
* @brief ICUD2 driver identifier.
* @note The driver ICUD2 allocates the complex timer SMOD1 when enabled.
*/
#if SPC5_ICU_USE_SMOD1 || defined(__DOXYGEN__)
ICUDriver ICUD2;
#endif
/**
* @brief ICUD3 driver identifier.
* @note The driver ICUD3 allocates the complex timer SMOD2 when enabled.
*/
#if SPC5_ICU_USE_SMOD2 || defined(__DOXYGEN__)
ICUDriver ICUD3;
#endif
/**
* @brief ICUD4 driver identifier.
* @note The driver ICUD4 allocates the complex timer SMOD3 when enabled.
*/
#if SPC5_ICU_USE_SMOD3 || defined(__DOXYGEN__)
ICUDriver ICUD4;
#endif
/**
* @brief ICUD5 driver identifier.
* @note The driver ICUD5 allocates the complex timer SMOD4 when enabled.
*/
#if SPC5_ICU_USE_SMOD4 || defined(__DOXYGEN__)
ICUDriver ICUD5;
#endif
/**
* @brief ICUD6 driver identifier.
* @note The driver ICUD6 allocates the complex timer SMOD5 when enabled.
*/
#if SPC5_ICU_USE_SMOD5 || defined(__DOXYGEN__)
ICUDriver ICUD6;
#endif
/**
* @brief ICUD7 driver identifier.
* @note The driver ICUD7 allocates the complex timer SMOD6 when enabled.
*/
#if SPC5_ICU_USE_SMOD6 || defined(__DOXYGEN__)
ICUDriver ICUD7;
#endif
/**
* @brief ICUD8 driver identifier.
* @note The driver ICUD8 allocates the complex timer SMOD7 when enabled.
*/
#if SPC5_ICU_USE_SMOD7 || defined(__DOXYGEN__)
ICUDriver ICUD8;
#endif
/**
* @brief ICUD9 driver identifier.
* @note The driver ICUD9 allocates the complex timer SMOD8 when enabled.
*/
#if SPC5_ICU_USE_SMOD8 || defined(__DOXYGEN__)
ICUDriver ICUD9;
#endif
/**
* @brief ICUD10 driver identifier.
* @note The driver ICUD10 allocates the complex timer SMOD9 when enabled.
*/
#if SPC5_ICU_USE_SMOD9 || defined(__DOXYGEN__)
ICUDriver ICUD10;
#endif
/**
* @brief ICUD11 driver identifier.
* @note The driver ICUD11 allocates the complex timer SMOD10 when enabled.
*/
#if SPC5_ICU_USE_SMOD10 || defined(__DOXYGEN__)
ICUDriver ICUD11;
#endif
/**
* @brief ICUD12 driver identifier.
* @note The driver ICUD12 allocates the complex timer SMOD11 when enabled.
*/
#if SPC5_ICU_USE_SMOD11 || defined(__DOXYGEN__)
ICUDriver ICUD12;
#endif
/**
* @brief ICUD13 driver identifier.
* @note The driver ICUD13 allocates the complex timer SMOD12 when enabled.
*/
#if SPC5_ICU_USE_SMOD12 || defined(__DOXYGEN__)
ICUDriver ICUD13;
#endif
/**
* @brief ICUD14 driver identifier.
* @note The driver ICUD14 allocates the complex timer SMOD13 when enabled.
*/
#if SPC5_ICU_USE_SMOD13 || defined(__DOXYGEN__)
ICUDriver ICUD14;
#endif
/**
* @brief ICUD15 driver identifier.
* @note The driver ICUD15 allocates the complex timer SMOD14 when enabled.
*/
#if SPC5_ICU_USE_SMOD14 || defined(__DOXYGEN__)
ICUDriver ICUD15;
#endif
/**
* @brief ICUD16 driver identifier.
* @note The driver ICUD16 allocates the complex timer SMOD15 when enabled.
*/
#if SPC5_ICU_USE_SMOD15 || defined(__DOXYGEN__)
ICUDriver ICUD16;
#endif
/**
* @brief ICUD17 driver identifier.
* @note The driver ICUD17 allocates the complex timer SMOD16 when enabled.
*/
#if SPC5_ICU_USE_SMOD16 || defined(__DOXYGEN__)
ICUDriver ICUD17;
#endif
/**
* @brief ICUD18 driver identifier.
* @note The driver ICUD18 allocates the complex timer SMOD17 when enabled.
*/
#if SPC5_ICU_USE_SMOD17 || defined(__DOXYGEN__)
ICUDriver ICUD18;
#endif
/*===========================================================================*/
/* Driver local variables. */
/*===========================================================================*/
/**
* @brief Number of active eTimer Submodules.
*/
static uint32_t icu_active_submodules0;
static uint32_t icu_active_submodules1;
static uint32_t icu_active_submodules2;
/**
* @brief Width and Period registers.
*/
uint16_t width;
uint16_t period;
/*===========================================================================*/
/* Driver local functions. */
/*===========================================================================*/
/**
* @brief Shared IRQ handler.
*
* @param[in] icup pointer to the @p ICUDriver object
*/
static void icu_lld_serve_interrupt(ICUDriver *icup) {
uint16_t sr = icup->etimerp->CHANNEL[icup->smod_number].STS.R &
icup->etimerp->CHANNEL[icup->smod_number].INTDMA.R;
if (ICU_SKIP_FIRST_CAPTURE) {
if ((sr & 0x0008) != 0) { /* TOF */
icup->etimerp->CHANNEL[icup->smod_number].STS.B.TOF = 1U;
_icu_isr_invoke_overflow_cb(icup);
}
if ((sr & 0x0040) != 0) { /* ICF1 */
if (icup->etimerp->CHANNEL[icup->smod_number].CTRL.B.CNTMODE ==
SPC5_ETIMER_CNTMODE_RFE_SIHA) {
icup->etimerp->CHANNEL[icup->smod_number].STS.B.ICF1 = 1U;
icup->etimerp->CHANNEL[icup->smod_number].CTRL.B.CNTMODE =
SPC5_ETIMER_CNTMODE_RE;
}
else {
icup->etimerp->CHANNEL[icup->smod_number].STS.B.ICF1 = 1U;
if (icup->etimerp->CHANNEL[icup->smod_number].CTRL3.B.C1FCNT == 2) {
period = icup->etimerp->CHANNEL[icup->smod_number].CAPT1.R;
period = icup->etimerp->CHANNEL[icup->smod_number].CAPT1.R;
} else {
period = icup->etimerp->CHANNEL[icup->smod_number].CAPT1.R;
}
_icu_isr_invoke_period_cb(icup);
}
}
else if ((sr & 0x0080) != 0) { /* ICF2 */
if (icup->etimerp->CHANNEL[icup->smod_number].CTRL.B.CNTMODE ==
SPC5_ETIMER_CNTMODE_RFE_SIHA) {
icup->etimerp->CHANNEL[icup->smod_number].STS.B.ICF2 = 1U;
icup->etimerp->CHANNEL[icup->smod_number].CNTR.R = 0;
}
else {
icup->etimerp->CHANNEL[icup->smod_number].STS.B.ICF2 = 1U;
if (icup->etimerp->CHANNEL[icup->smod_number].CTRL3.B.C2FCNT == 2) {
width = icup->etimerp->CHANNEL[icup->smod_number].CAPT2.R;
width = icup->etimerp->CHANNEL[icup->smod_number].CAPT2.R;
} else {
width = icup->etimerp->CHANNEL[icup->smod_number].CAPT2.R;
}
_icu_isr_invoke_width_cb(icup);
}
}
} else { /* ICU_SKIP_FIRST_CAPTURE = TRUE*/
if ((sr & 0x0008) != 0) { /* TOF */
icup->etimerp->CHANNEL[icup->smod_number].STS.B.TOF = 1U;
_icu_isr_invoke_overflow_cb(icup);
}
if ((sr & 0x0040) != 0) { /* ICF1 */
icup->etimerp->CHANNEL[icup->smod_number].STS.B.ICF1 = 1U;
if (icup->etimerp->CHANNEL[icup->smod_number].CTRL3.B.C1FCNT == 2) {
period = icup->etimerp->CHANNEL[icup->smod_number].CAPT1.R;
period = icup->etimerp->CHANNEL[icup->smod_number].CAPT1.R;
} else {
period = icup->etimerp->CHANNEL[icup->smod_number].CAPT1.R;
}
_icu_isr_invoke_period_cb(icup);
}
else if ((sr & 0x0080) != 0) { /* ICF2 */
icup->etimerp->CHANNEL[icup->smod_number].STS.B.ICF2 = 1U;
if (icup->etimerp->CHANNEL[icup->smod_number].CTRL3.B.C2FCNT == 2) {
width = icup->etimerp->CHANNEL[icup->smod_number].CAPT2.R;
width = icup->etimerp->CHANNEL[icup->smod_number].CAPT2.R;
} else {
width = icup->etimerp->CHANNEL[icup->smod_number].CAPT2.R;
}
_icu_isr_invoke_width_cb(icup);
}
} /* ICU_SKIP_FIRST_CAPTURE = FALSE */
}
/**
* @brief eTimer SubModules initialization.
* @details This function must be invoked with interrupts disabled.
*
* @param[in] sdp pointer to a @p ICUDriver object
* @param[in] config the architecture-dependent ICU driver configuration
*/
static void spc5_icu_smod_init(ICUDriver *icup) {
uint32_t psc = (icup->clock / icup->config->frequency);
chDbgAssert((psc <= 0xFFFF) &&
(((psc) * icup->config->frequency) == icup->clock) &&
((psc == 1) || (psc == 2) || (psc == 4) ||
(psc == 8) || (psc == 16) || (psc == 32) ||
(psc == 64) || (psc == 128)),
"icu_lld_start(), #1", "invalid frequency");
/* Set primary source and clock prescaler.*/
switch (psc) {
case 1:
icup->etimerp->CHANNEL[icup->smod_number].CTRL.B.PRISRC =
SPC5_ETIMER_IP_BUS_CLOCK_DIVIDE_BY_1;
break;
case 2:
icup->etimerp->CHANNEL[icup->smod_number].CTRL.B.PRISRC =
SPC5_ETIMER_IP_BUS_CLOCK_DIVIDE_BY_2;
break;
case 4:
icup->etimerp->CHANNEL[icup->smod_number].CTRL.B.PRISRC =
SPC5_ETIMER_IP_BUS_CLOCK_DIVIDE_BY_4;
break;
case 8:
icup->etimerp->CHANNEL[icup->smod_number].CTRL.B.PRISRC =
SPC5_ETIMER_IP_BUS_CLOCK_DIVIDE_BY_8;
break;
case 16:
icup->etimerp->CHANNEL[icup->smod_number].CTRL.B.PRISRC =
SPC5_ETIMER_IP_BUS_CLOCK_DIVIDE_BY_16;
break;
case 32:
icup->etimerp->CHANNEL[icup->smod_number].CTRL.B.PRISRC =
SPC5_ETIMER_IP_BUS_CLOCK_DIVIDE_BY_32;
break;
case 64:
icup->etimerp->CHANNEL[icup->smod_number].CTRL.B.PRISRC =
SPC5_ETIMER_IP_BUS_CLOCK_DIVIDE_BY_64;
break;
case 128:
icup->etimerp->CHANNEL[icup->smod_number].CTRL.B.PRISRC =
SPC5_ETIMER_IP_BUS_CLOCK_DIVIDE_BY_128;
break;
}
/* Set control registers.*/
icup->etimerp->CHANNEL[icup->smod_number].CTRL.B.ONCE = 0U;
icup->etimerp->CHANNEL[icup->smod_number].CTRL.B.LENGTH = 0U;
icup->etimerp->CHANNEL[icup->smod_number].CTRL.B.DIR = 0U;
icup->etimerp->CHANNEL[icup->smod_number].CTRL2.B.PIPS = 0U;
/* Set secondary source.*/
switch (icup->smod_number) {
case 0:
icup->etimerp->CHANNEL[icup->smod_number].CTRL.B.SECSRC =
SPC5_ETIMER_COUNTER_0_INPUT_PIN;
break;
case 1:
icup->etimerp->CHANNEL[icup->smod_number].CTRL.B.SECSRC =
SPC5_ETIMER_COUNTER_1_INPUT_PIN;
break;
case 2:
icup->etimerp->CHANNEL[icup->smod_number].CTRL.B.SECSRC =
SPC5_ETIMER_COUNTER_2_INPUT_PIN;
break;
case 3:
icup->etimerp->CHANNEL[icup->smod_number].CTRL.B.SECSRC =
SPC5_ETIMER_COUNTER_3_INPUT_PIN;
break;
case 4:
icup->etimerp->CHANNEL[icup->smod_number].CTRL.B.SECSRC =
SPC5_ETIMER_COUNTER_4_INPUT_PIN;
break;
case 5:
icup->etimerp->CHANNEL[icup->smod_number].CTRL.B.SECSRC =
SPC5_ETIMER_COUNTER_5_INPUT_PIN;
break;
}
/* Set secondary source polarity.*/
if (icup->config->mode == ICU_INPUT_ACTIVE_HIGH) {
icup->etimerp->CHANNEL[icup->smod_number].CTRL2.B.SIPS = 0U;
}
else {
icup->etimerp->CHANNEL[icup->smod_number].CTRL2.B.SIPS = 1U;
}
/* Direct pointers to the capture registers in order to make reading
data faster from within callbacks.*/
icup->pccrp = &period;
icup->wccrp = &width;
/* Enable channel.*/
icup->etimerp->ENBL.B.ENBL |= 1U << (icup->smod_number);
}
/*===========================================================================*/
/* Driver interrupt handlers. */
/*===========================================================================*/
#if SPC5_ICU_USE_SMOD0
#if !defined(SPC5_ETIMER0_TC0IR_HANDLER)
#error "SPC5_ETIMER0_TC0IR_HANDLER not defined"
#endif
/**
* @brief eTimer0 Channel 0 interrupt handler.
* @note It is assumed that the various sources are only activated if the
* associated callback pointer is not equal to @p NULL in order to not
* perform an extra check in a potentially critical interrupt handler.
*
* @isr
*/CH_IRQ_HANDLER(SPC5_ETIMER0_TC0IR_HANDLER) {
CH_IRQ_PROLOGUE();
icu_lld_serve_interrupt(&ICUD1);
CH_IRQ_EPILOGUE();
}
#endif /* SPC5_ICU_USE_SMOD0 */
#if SPC5_ICU_USE_SMOD1
#if !defined(SPC5_ETIMER0_TC1IR_HANDLER)
#error "SPC5_ETIMER0_TC1IR_HANDLER not defined"
#endif
/**
* @brief eTimer0 Channel 1 interrupt handler.
* @note It is assumed that the various sources are only activated if the
* associated callback pointer is not equal to @p NULL in order to not
* perform an extra check in a potentially critical interrupt handler.
*
* @isr
*/
CH_IRQ_HANDLER(SPC5_ETIMER0_TC1IR_HANDLER) {
CH_IRQ_PROLOGUE();
icu_lld_serve_interrupt(&ICUD2);
CH_IRQ_EPILOGUE();
}
#endif /* SPC5_ICU_USE_SMOD1 */
#if SPC5_ICU_USE_SMOD2
#if !defined(SPC5_ETIMER0_TC2IR_HANDLER)
#error "SPC5_ETIMER0_TC2IR_HANDLER not defined"
#endif
/**
* @brief eTimer0 Channel 2 interrupt handler.
* @note It is assumed that the various sources are only activated if the
* associated callback pointer is not equal to @p NULL in order to not
* perform an extra check in a potentially critical interrupt handler.
*
* @isr
*/
CH_IRQ_HANDLER(SPC5_ETIMER0_TC2IR_HANDLER) {
CH_IRQ_PROLOGUE();
icu_lld_serve_interrupt(&ICUD3);
CH_IRQ_EPILOGUE();
}
#endif /* SPC5_ICU_USE_SMOD2 */
#if SPC5_ICU_USE_SMOD3
#if !defined(SPC5_ETIMER0_TC3IR_HANDLER)
#error "SPC5_ETIMER0_TC3IR_HANDLER not defined"
#endif
/**
* @brief eTimer0 Channel 3 interrupt handler.
* @note It is assumed that the various sources are only activated if the
* associated callback pointer is not equal to @p NULL in order to not
* perform an extra check in a potentially critical interrupt handler.
*
* @isr
*/
CH_IRQ_HANDLER(SPC5_ETIMER0_TC3IR_HANDLER) {
CH_IRQ_PROLOGUE();
icu_lld_serve_interrupt(&ICUD4);
CH_IRQ_EPILOGUE();
}
#endif /* SPC5_ICU_USE_SMOD3 */
#if SPC5_ICU_USE_SMOD4
#if !defined(SPC5_ETIMER0_TC4IR_HANDLER)
#error "SPC5_ETIMER0_TC4IR_HANDLER not defined"
#endif
/**
* @brief eTimer0 Channel 4 interrupt handler.
* @note It is assumed that the various sources are only activated if the
* associated callback pointer is not equal to @p NULL in order to not
* perform an extra check in a potentially critical interrupt handler.
*
* @isr
*/
CH_IRQ_HANDLER(SPC5_ETIMER0_TC4IR_HANDLER) {
CH_IRQ_PROLOGUE();
icu_lld_serve_interrupt(&ICUD5);
CH_IRQ_EPILOGUE();
}
#endif /* SPC5_ICU_USE_SMOD4 */
#if SPC5_ICU_USE_SMOD5
#if !defined(SPC5_ETIMER0_TC5IR_HANDLER)
#error "SPC5_ETIMER0_TC5IR_HANDLER not defined"
#endif
/**
* @brief eTimer0 Channel 5 interrupt handler.
* @note It is assumed that the various sources are only activated if the
* associated callback pointer is not equal to @p NULL in order to not
* perform an extra check in a potentially critical interrupt handler.
*
* @isr
*/
CH_IRQ_HANDLER(SPC5_ETIMER0_TC5IR_HANDLER) {
CH_IRQ_PROLOGUE();
icu_lld_serve_interrupt(&ICUD6);
CH_IRQ_EPILOGUE();
}
#endif /* SPC5_ICU_USE_SMOD5 */
#if SPC5_ICU_USE_SMOD6
#if !defined(SPC5_ETIMER1_TC0IR_HANDLER)
#error "SPC5_ETIMER1_TC0IR_HANDLER not defined"
#endif
/**
* @brief eTimer1 Channel 0 interrupt handler.
* @note It is assumed that the various sources are only activated if the
* associated callback pointer is not equal to @p NULL in order to not
* perform an extra check in a potentially critical interrupt handler.
*
* @isr
*/
CH_IRQ_HANDLER(SPC5_ETIMER1_TC0IR_HANDLER) {
CH_IRQ_PROLOGUE();
icu_lld_serve_interrupt(&ICUD7);
CH_IRQ_EPILOGUE();
}
#endif /* SPC5_ICU_USE_SMOD6 */
#if SPC5_ICU_USE_SMOD7
#if !defined(SPC5_ETIMER1_TC1IR_HANDLER)
#error "SPC5_ETIMER1_TC1IR_HANDLER not defined"
#endif
/**
* @brief eTimer1 Channel 1 interrupt handler.
* @note It is assumed that the various sources are only activated if the
* associated callback pointer is not equal to @p NULL in order to not
* perform an extra check in a potentially critical interrupt handler.
*
* @isr
*/
CH_IRQ_HANDLER(SPC5_ETIMER1_TC1IR_HANDLER) {
CH_IRQ_PROLOGUE();
icu_lld_serve_interrupt(&ICUD8);
CH_IRQ_EPILOGUE();
}
#endif /* SPC5_ICU_USE_SMOD7 */
#if SPC5_ICU_USE_SMOD8
#if !defined(SPC5_ETIMER1_TC2IR_HANDLER)
#error "SPC5_ETIMER1_TC2IR_HANDLER not defined"
#endif
/**
* @brief eTimer1 Channel 2 interrupt handler.
* @note It is assumed that the various sources are only activated if the
* associated callback pointer is not equal to @p NULL in order to not
* perform an extra check in a potentially critical interrupt handler.
*
* @isr
*/
CH_IRQ_HANDLER(SPC5_ETIMER1_TC2IR_HANDLER) {
CH_IRQ_PROLOGUE();
icu_lld_serve_interrupt(&ICUD9);
CH_IRQ_EPILOGUE();
}
#endif /* SPC5_ICU_USE_SMOD8 */
#if SPC5_ICU_USE_SMOD9
#if !defined(SPC5_ETIMER1_TC3IR_HANDLER)
#error "SPC5_ETIMER1_TC3IR_HANDLER not defined"
#endif
/**
* @brief eTimer1 Channel 3 interrupt handler.
* @note It is assumed that the various sources are only activated if the
* associated callback pointer is not equal to @p NULL in order to not
* perform an extra check in a potentially critical interrupt handler.
*
* @isr
*/
CH_IRQ_HANDLER(SPC5_ETIMER1_TC3IR_HANDLER) {
CH_IRQ_PROLOGUE();
icu_lld_serve_interrupt(&ICUD10);
CH_IRQ_EPILOGUE();
}
#endif /* SPC5_ICU_USE_SMOD9 */
#if SPC5_ICU_USE_SMOD10
#if !defined(SPC5_ETIMER1_TC4IR_HANDLER)
#error "SPC5_ETIMER1_TC4IR_HANDLER not defined"
#endif
/**
* @brief eTimer1 Channel 4 interrupt handler.
* @note It is assumed that the various sources are only activated if the
* associated callback pointer is not equal to @p NULL in order to not
* perform an extra check in a potentially critical interrupt handler.
*
* @isr
*/
CH_IRQ_HANDLER(SPC5_ETIMER1_TC4IR_HANDLER) {
CH_IRQ_PROLOGUE();
icu_lld_serve_interrupt(&ICUD11);
CH_IRQ_EPILOGUE();
}
#endif /* SPC5_ICU_USE_SMOD10 */
#if SPC5_ICU_USE_SMOD11
#if !defined(SPC5_ETIMER1_TC5IR_HANDLER)
#error "SPC5_ETIMER1_TC5IR_HANDLER not defined"
#endif
/**
* @brief eTimer1 Channel 5 interrupt handler.
* @note It is assumed that the various sources are only activated if the
* associated callback pointer is not equal to @p NULL in order to not
* perform an extra check in a potentially critical interrupt handler.
*
* @isr
*/
CH_IRQ_HANDLER(SPC5_ETIMER1_TC5IR_HANDLER) {
CH_IRQ_PROLOGUE();
icu_lld_serve_interrupt(&ICUD12);
CH_IRQ_EPILOGUE();
}
#endif /* SPC5_ICU_USE_SMOD11 */
#if SPC5_ICU_USE_SMOD12
#if !defined(SPC5_ETIMER2_TC0IR_HANDLER)
#error "SPC5_ETIMER2_TC0IR_HANDLER not defined"
#endif
/**
* @brief eTimer2 Channel 0 interrupt handler.
* @note It is assumed that the various sources are only activated if the
* associated callback pointer is not equal to @p NULL in order to not
* perform an extra check in a potentially critical interrupt handler.
*
* @isr
*/
CH_IRQ_HANDLER(SPC5_ETIMER2_TC0IR_HANDLER) {
CH_IRQ_PROLOGUE();
icu_lld_serve_interrupt(&ICUD13);
CH_IRQ_EPILOGUE();
}
#endif /* SPC5_ICU_USE_SMOD12 */
#if SPC5_ICU_USE_SMOD13
#if !defined(SPC5_ETIMER2_TC1IR_HANDLER)
#error "SPC5_ETIMER2_TC1IR_HANDLER not defined"
#endif
/**
* @brief eTimer2 Channel 1 interrupt handler.
* @note It is assumed that the various sources are only activated if the
* associated callback pointer is not equal to @p NULL in order to not
* perform an extra check in a potentially critical interrupt handler.
*
* @isr
*/
CH_IRQ_HANDLER(SPC5_ETIMER2_TC1IR_HANDLER) {
CH_IRQ_PROLOGUE();
icu_lld_serve_interrupt(&ICUD14);
CH_IRQ_EPILOGUE();
}
#endif /* SPC5_ICU_USE_SMOD13 */
#if SPC5_ICU_USE_SMOD14
#if !defined(SPC5_ETIMER2_TC2IR_HANDLER)
#error "SPC5_ETIMER2_TC2IR_HANDLER not defined"
#endif
/**
* @brief eTimer2 Channel 2 interrupt handler.
* @note It is assumed that the various sources are only activated if the
* associated callback pointer is not equal to @p NULL in order to not
* perform an extra check in a potentially critical interrupt handler.
*
* @isr
*/
CH_IRQ_HANDLER(SPC5_ETIMER2_TC2IR_HANDLER) {
CH_IRQ_PROLOGUE();
icu_lld_serve_interrupt(&ICUD15);
CH_IRQ_EPILOGUE();
}
#endif /* SPC5_ICU_USE_SMOD14 */
#if SPC5_ICU_USE_SMOD15
#if !defined(SPC5_ETIMER2_TC3IR_HANDLER)
#error "SPC5_ETIMER2_TC3IR_HANDLER not defined"
#endif
/**
* @brief eTimer2 Channel 3 interrupt handler.
* @note It is assumed that the various sources are only activated if the
* associated callback pointer is not equal to @p NULL in order to not
* perform an extra check in a potentially critical interrupt handler.
*
* @isr
*/
CH_IRQ_HANDLER(SPC5_ETIMER2_TC3IR_HANDLER) {
CH_IRQ_PROLOGUE();
icu_lld_serve_interrupt(&ICUD16);
CH_IRQ_EPILOGUE();
}
#endif /* SPC5_ICU_USE_SMOD15 */
#if SPC5_ICU_USE_SMOD16
#if !defined(SPC5_ETIMER2_TC4IR_HANDLER)
#error "SPC5_ETIMER2_TC4IR_HANDLER not defined"
#endif
/**
* @brief eTimer2 Channel 4 interrupt handler.
* @note It is assumed that the various sources are only activated if the
* associated callback pointer is not equal to @p NULL in order to not
* perform an extra check in a potentially critical interrupt handler.
*
* @isr
*/
CH_IRQ_HANDLER(SPC5_ETIMER2_TC4IR_HANDLER) {
CH_IRQ_PROLOGUE();
icu_lld_serve_interrupt(&ICUD17);
CH_IRQ_EPILOGUE();
}
#endif /* SPC5_ICU_USE_SMOD16 */
#if SPC5_ICU_USE_SMOD17
#if !defined(SPC5_ETIMER2_TC5IR_HANDLER)
#error "SPC5_ETIMER2_TC5IR_HANDLER not defined"
#endif
/**
* @brief eTimer2 Channel 5 interrupt handler.
* @note It is assumed that the various sources are only activated if the
* associated callback pointer is not equal to @p NULL in order to not
* perform an extra check in a potentially critical interrupt handler.
*
* @isr
*/
CH_IRQ_HANDLER(SPC5_ETIMER2_TC5IR_HANDLER) {
CH_IRQ_PROLOGUE();
icu_lld_serve_interrupt(&ICUD18);
CH_IRQ_EPILOGUE();
}
#endif /* SPC5_ICU_USE_SMOD17 */
/*===========================================================================*/
/* Driver exported functions. */
/*===========================================================================*/
/**
* @brief Low level ICU driver initialization.
*
* @notapi
*/
void icu_lld_init(void) {
/* Submodules initially all not in use.*/
icu_active_submodules0 = 0;
icu_active_submodules1 = 0;
icu_active_submodules2 = 0;
/* Reset width and period registers.*/
width = 0;
period = 0;
#if SPC5_ICU_USE_SMOD0
/* Driver initialization.*/
icuObjectInit(&ICUD1);
ICUD1.etimerp = &SPC5_ETIMER_0;
ICUD1.smod_number = 0U;
#endif
#if SPC5_ICU_USE_SMOD1
/* Driver initialization.*/
icuObjectInit(&ICUD2);
ICUD2.etimerp = &SPC5_ETIMER_0;
ICUD2.smod_number = 1U;
#endif
#if SPC5_ICU_USE_SMOD2
/* Driver initialization.*/
icuObjectInit(&ICUD3);
ICUD3.etimerp = &SPC5_ETIMER_0;
ICUD3.smod_number = 2U;
#endif
#if SPC5_ICU_USE_SMOD3
/* Driver initialization.*/
icuObjectInit(&ICUD4);
ICUD4.etimerp = &SPC5_ETIMER_0;
ICUD4.smod_number = 3U;
#endif
#if SPC5_ICU_USE_SMOD4
/* Driver initialization.*/
icuObjectInit(&ICUD5);
ICUD5.etimerp = &SPC5_ETIMER_0;
ICUD5.smod_number = 4U;
#endif
#if SPC5_ICU_USE_SMOD5
/* Driver initialization.*/
icuObjectInit(&ICUD6);
ICUD6.etimerp = &SPC5_ETIMER_0;
ICUD6.smod_number = 5U;
#endif
#if SPC5_ICU_USE_SMOD6
/* Driver initialization.*/
icuObjectInit(&ICUD7);
ICUD7.etimerp = &SPC5_ETIMER_1;
ICUD7.smod_number = 0U;
#endif
#if SPC5_ICU_USE_SMOD7
/* Driver initialization.*/
icuObjectInit(&ICUD8);
ICUD8.etimerp = &SPC5_ETIMER_1;
ICUD8.smod_number = 1U;
#endif
#if SPC5_ICU_USE_SMOD8
/* Driver initialization.*/
icuObjectInit(&ICUD9);
ICUD9.etimerp = &SPC5_ETIMER_1;
ICUD9.smod_number = 2U;
#endif
#if SPC5_ICU_USE_SMOD9
/* Driver initialization.*/
icuObjectInit(&ICUD10);
ICUD10.etimerp = &SPC5_ETIMER_1;
ICUD10.smod_number = 3U;
#endif
#if SPC5_ICU_USE_SMOD10
/* Driver initialization.*/
icuObjectInit(&ICUD11);
ICUD11.etimerp = &SPC5_ETIMER_1;
ICUD11.smod_number = 4U;
#endif
#if SPC5_ICU_USE_SMOD11
/* Driver initialization.*/
icuObjectInit(&ICUD12);
ICUD12.etimerp = &SPC5_ETIMER_1;
ICUD12.smod_number = 5U;
#endif
#if SPC5_ICU_USE_SMOD12
/* Driver initialization.*/
icuObjectInit(&ICUD13);
ICUD13.etimerp = &SPC5_ETIMER_2;
ICUD13.smod_number = 0U;
#endif
#if SPC5_ICU_USE_SMOD13
/* Driver initialization.*/
icuObjectInit(&ICUD14);
ICUD14.etimerp = &SPC5_ETIMER_2;
ICUD14.smod_number = 1U;
#endif
#if SPC5_ICU_USE_SMOD14
/* Driver initialization.*/
icuObjectInit(&ICUD15);
ICUD15.etimerp = &SPC5_ETIMER_2;
ICUD15.smod_number = 2U;
#endif
#if SPC5_ICU_USE_SMOD15
/* Driver initialization.*/
icuObjectInit(&ICUD16);
ICUD16.etimerp = &SPC5_ETIMER_2;
ICUD16.smod_number = 3U;
#endif
#if SPC5_ICU_USE_SMOD16
/* Driver initialization.*/
icuObjectInit(&ICUD17);
ICUD17.etimerp = &SPC5_ETIMER_2;
ICUD17.smod_number = 4U;
#endif
#if SPC5_ICU_USE_SMOD17
/* Driver initialization.*/
icuObjectInit(&ICUD18);
ICUD18.etimerp = &SPC5_ETIMER_2;
ICUD18.smod_number = 5U;
#endif
#if SPC5_ICU_USE_ETIMER0
INTC.PSR[SPC5_ETIMER0_TC0IR_NUMBER].R = SPC5_ICU_ETIMER0_PRIORITY;
INTC.PSR[SPC5_ETIMER0_TC1IR_NUMBER].R = SPC5_ICU_ETIMER0_PRIORITY;
INTC.PSR[SPC5_ETIMER0_TC2IR_NUMBER].R = SPC5_ICU_ETIMER0_PRIORITY;
INTC.PSR[SPC5_ETIMER0_TC3IR_NUMBER].R = SPC5_ICU_ETIMER0_PRIORITY;
INTC.PSR[SPC5_ETIMER0_TC4IR_NUMBER].R = SPC5_ICU_ETIMER0_PRIORITY;
INTC.PSR[SPC5_ETIMER0_TC5IR_NUMBER].R = SPC5_ICU_ETIMER0_PRIORITY;
INTC.PSR[SPC5_ETIMER0_WTIF_NUMBER].R = SPC5_ICU_ETIMER0_PRIORITY;
INTC.PSR[SPC5_ETIMER0_RCF_NUMBER].R = SPC5_ICU_ETIMER0_PRIORITY;
#endif
#if SPC5_ICU_USE_ETIMER1
INTC.PSR[SPC5_ETIMER1_TC0IR_NUMBER].R = SPC5_ICU_ETIMER1_PRIORITY;
INTC.PSR[SPC5_ETIMER1_TC1IR_NUMBER].R = SPC5_ICU_ETIMER1_PRIORITY;
INTC.PSR[SPC5_ETIMER1_TC2IR_NUMBER].R = SPC5_ICU_ETIMER1_PRIORITY;
INTC.PSR[SPC5_ETIMER1_TC3IR_NUMBER].R = SPC5_ICU_ETIMER1_PRIORITY;
INTC.PSR[SPC5_ETIMER1_TC4IR_NUMBER].R = SPC5_ICU_ETIMER1_PRIORITY;
INTC.PSR[SPC5_ETIMER1_TC5IR_NUMBER].R = SPC5_ICU_ETIMER1_PRIORITY;
INTC.PSR[SPC5_ETIMER1_RCF_NUMBER].R = SPC5_ICU_ETIMER1_PRIORITY;
#endif
#if SPC5_ICU_USE_ETIMER2
INTC.PSR[SPC5_ETIMER2_TC0IR_NUMBER].R = SPC5_ICU_ETIMER2_PRIORITY;
INTC.PSR[SPC5_ETIMER2_TC1IR_NUMBER].R = SPC5_ICU_ETIMER2_PRIORITY;
INTC.PSR[SPC5_ETIMER2_TC2IR_NUMBER].R = SPC5_ICU_ETIMER2_PRIORITY;
INTC.PSR[SPC5_ETIMER2_TC3IR_NUMBER].R = SPC5_ICU_ETIMER2_PRIORITY;
INTC.PSR[SPC5_ETIMER2_TC4IR_NUMBER].R = SPC5_ICU_ETIMER2_PRIORITY;
INTC.PSR[SPC5_ETIMER2_TC5IR_NUMBER].R = SPC5_ICU_ETIMER2_PRIORITY;
INTC.PSR[SPC5_ETIMER2_RCF_NUMBER].R = SPC5_ICU_ETIMER2_PRIORITY;
#endif
}
/**
* @brief Configures and activates the ICU peripheral.
*
* @param[in] icup pointer to the @p ICUDriver object
*
* @notapi
*/
void icu_lld_start(ICUDriver *icup) {
chDbgAssert(icu_active_submodules0 < 6, "icu_lld_start(), #1",
"too many submodules");
chDbgAssert(icu_active_submodules1 < 6, "icu_lld_start(), #1",
"too many submodules");
chDbgAssert(icu_active_submodules2 < 6, "icu_lld_start(), #1",
"too many submodules");
if (icup->state == ICU_STOP) {
#if SPC5_ICU_USE_SMOD0
if (&ICUD1 == icup)
icu_active_submodules0++;
#endif
#if SPC5_ICU_USE_SMOD1
if (&ICUD2 == icup)
icu_active_submodules0++;
#endif
#if SPC5_ICU_USE_SMOD2
if (&ICUD3 == icup)
icu_active_submodules0++;
#endif
#if SPC5_ICU_USE_SMOD3
if (&ICUD4 == icup)
icu_active_submodules0++;
#endif
#if SPC5_ICU_USE_SMOD4
if (&ICUD5 == icup)
icu_active_submodules0++;
#endif
#if SPC5_ICU_USE_SMOD5
if (&ICUD6 == icup)
icu_active_submodules0++;
#endif
#if SPC5_ICU_USE_SMOD6
if (&ICUD7 == icup)
icu_active_submodules1++;
#endif
#if SPC5_ICU_USE_SMOD7
if (&ICUD8 == icup)
icu_active_submodules1++;
#endif
#if SPC5_ICU_USE_SMOD8
if (&ICUD9 == icup)
icu_active_submodules1++;
#endif
#if SPC5_ICU_USE_SMOD9
if (&ICUD10 == icup)
icu_active_submodules1++;
#endif
#if SPC5_ICU_USE_SMOD10
if (&ICUD11 == icup)
icu_active_submodules1++;
#endif
#if SPC5_ICU_USE_SMOD11
if (&ICUD12 == icup)
icu_active_submodules1++;
#endif
#if SPC5_ICU_USE_SMOD12
if (&ICUD13 == icup)
icu_active_submodules2++;
#endif
#if SPC5_ICU_USE_SMOD13
if (&ICUD14 == icup)
icu_active_submodules2++;
#endif
#if SPC5_ICU_USE_SMOD14
if (&ICUD15 == icup)
icu_active_submodules2++;
#endif
#if SPC5_ICU_USE_SMOD15
if (&ICUD16 == icup)
icu_active_submodules2++;
#endif
#if SPC5_ICU_USE_SMOD16
if (&ICUD17 == icup)
icu_active_submodules2++;
#endif
#if SPC5_ICU_USE_SMOD17
if (&ICUD18 == icup)
icu_active_submodules2++;
#endif
/* Set eTimer0 Clock.*/
#if SPC5_ICU_USE_ETIMER0
/* If this is the first Submodule activated then the eTimer0 is enabled.*/
if (icu_active_submodules0 == 1) {
halSPCSetPeripheralClockMode(SPC5_ETIMER0_PCTL,
SPC5_ICU_ETIMER0_START_PCTL);
}
#endif
/* Set eTimer1 Clock.*/
#if SPC5_ICU_USE_ETIMER1
/* If this is the first Submodule activated then the eTimer1 is enabled.*/
if (icu_active_submodules1 == 1) {
halSPCSetPeripheralClockMode(SPC5_ETIMER1_PCTL,
SPC5_ICU_ETIMER1_START_PCTL);
}
#endif
/* Set eTimer2 Clock.*/
#if SPC5_ICU_USE_ETIMER2
/* If this is the first Submodule activated then the eTimer2 is enabled.*/
if (icu_active_submodules2 == 1) {
halSPCSetPeripheralClockMode(SPC5_ETIMER2_PCTL,
SPC5_ICU_ETIMER2_START_PCTL);
}
#endif
/* Timer disabled.*/
icup->etimerp->CHANNEL[icup->smod_number].CTRL.B.CNTMODE =
SPC5_ETIMER_CNTMODE_NO_OPERATION;
/* Clear pending IRQs (if any).*/
icup->etimerp->CHANNEL[icup->smod_number].STS.R = 0xFFFF;
/* All IRQs and DMA requests disabled.*/
icup->etimerp->CHANNEL[icup->smod_number].INTDMA.R = 0U;
/* Compare Load 1 and Compare Load 2 disabled.*/
icup->etimerp->CHANNEL[icup->smod_number].CCCTRL.B.CLC1 = 0U;
icup->etimerp->CHANNEL[icup->smod_number].CCCTRL.B.CLC2 = 0U;
/* Capture 1 and Capture 2 disabled.*/
icup->etimerp->CHANNEL[icup->smod_number].CCCTRL.B.CPT1MODE =
SPC5_ETIMER_CPT1MODE_DISABLED;
icup->etimerp->CHANNEL[icup->smod_number].CCCTRL.B.CPT2MODE =
SPC5_ETIMER_CPT2MODE_DISABLED;
/* Counter reset to zero.*/
icup->etimerp->CHANNEL[icup->smod_number].CNTR.R = 0U;
}
/* Configuration.*/
spc5_icu_smod_init(icup);
}
/**
* @brief Deactivates the ICU peripheral.
*
* @param[in] icup pointer to the @p ICUDriver object
*
* @notapi
*/
void icu_lld_stop(ICUDriver *icup) {
chDbgAssert(icu_active_submodules0 < 6, "icu_lld_stop(), #1",
"too many submodules");
chDbgAssert(icu_active_submodules1 < 6, "icu_lld_stop(), #1",
"too many submodules");
chDbgAssert(icu_active_submodules2 < 6, "icu_lld_stop(), #1",
"too many submodules");
if (icup->state == ICU_READY) {
#if SPC5_ICU_USE_SMOD0
if (&ICUD1 == icup) {
/* Disable channel.*/
icup->etimerp->ENBL.B.ENBL &= 0xFE;
icu_active_submodules0--;
}
#endif
#if SPC5_ICU_USE_SMOD1
if (&ICUD2 == icup) {
/* Disable channel.*/
icup->etimerp->ENBL.B.ENBL &= 0xFD;
icu_active_submodules0--;
}
#endif
#if SPC5_ICU_USE_SMOD2
if (&ICUD3 == icup) {
/* Disable channel.*/
icup->etimerp->ENBL.B.ENBL &= 0xFB;
icu_active_submodules0--;
}
#endif
#if SPC5_ICU_USE_SMOD3
if (&ICUD4 == icup) {
/* Disable channel.*/
icup->etimerp->ENBL.B.ENBL &= 0xF7;
icu_active_submodules0--;
}
#endif
#if SPC5_ICU_USE_SMOD4
if (&ICUD5 == icup) {
/* Disable channel.*/
icup->etimerp->ENBL.B.ENBL &= 0xEF;
icu_active_submodules0--;
}
#endif
#if SPC5_ICU_USE_SMOD5
if (&ICUD6 == icup) {
/* Disable channel.*/
icup->etimerp->ENBL.B.ENBL &= 0xDF;
icu_active_submodules0--;
}
#endif
#if SPC5_ICU_USE_SMOD6
if (&ICUD7 == icup) {
/* Disable channel.*/
icup->etimerp->ENBL.B.ENBL &= 0xFE;
icu_active_submodules1--;
}
#endif
#if SPC5_ICU_USE_SMOD7
if (&ICUD8 == icup) {
/* Disable channel.*/
icup->etimerp->ENBL.B.ENBL &= 0xFD;
icu_active_submodules1--;
}
#endif
#if SPC5_ICU_USE_SMOD8
if (&ICUD9 == icup) {
/* Disable channel.*/
icup->etimerp->ENBL.B.ENBL &= 0xFB;
icu_active_submodules1--;
}
#endif
#if SPC5_ICU_USE_SMOD9
if (&ICUD10 == icup) {
/* Disable channel.*/
icup->etimerp->ENBL.B.ENBL &= 0xF7;
icu_active_submodules1--;
}
#endif
#if SPC5_ICU_USE_SMOD10
if (&ICUD11 == icup) {
/* Disable channel.*/
icup->etimerp->ENBL.B.ENBL &= 0xEF;
icu_active_submodules1--;
}
#endif
#if SPC5_ICU_USE_SMOD11
if (&ICUD12 == icup) {
/* Disable channel.*/
icup->etimerp->ENBL.B.ENBL &= 0xDF;
icu_active_submodules1--;
}
#endif
#if SPC5_ICU_USE_SMOD12
if (&ICUD13 == icup) {
/* Disable channel.*/
icup->etimerp->ENBL.B.ENBL &= 0xFE;
icu_active_submodules2--;
}
#endif
#if SPC5_ICU_USE_SMOD13
if (&ICUD14 == icup) {
/* Disable channel.*/
icup->etimerp->ENBL.B.ENBL &= 0xFD;
icu_active_submodules2--;
}
#endif
#if SPC5_ICU_USE_SMOD14
if (&ICUD15 == icup) {
/* Disable channel.*/
icup->etimerp->ENBL.B.ENBL &= 0xFB;
icu_active_submodules2--;
}
#endif
#if SPC5_ICU_USE_SMOD15
if (&ICUD16 == icup) {
/* Disable channel.*/
icup->etimerp->ENBL.B.ENBL &= 0xF7;
icu_active_submodules2--;
}
#endif
#if SPC5_ICU_USE_SMOD16
if (&ICUD17 == icup) {
/* Disable channel.*/
icup->etimerp->ENBL.B.ENBL &= 0xEF;
icu_active_submodules2--;
}
#endif
#if SPC5_ICU_USE_SMOD17
if (&ICUD18 == icup) {
/* Disable channel.*/
icup->etimerp->ENBL.B.ENBL &= 0xDF;
icu_active_submodules2--;
}
#endif
/* eTimer0 clock deactivation.*/
#if SPC5_ICU_USE_ETIMER0
/* If it is the last active submodules then the eTimer0 is disabled.*/
if (icu_active_submodules0 == 0) {
if (icup->etimerp->ENBL.B.ENBL == 0) {
halSPCSetPeripheralClockMode(SPC5_ETIMER0_PCTL,
SPC5_ICU_ETIMER0_STOP_PCTL);
}
}
#endif
/* eTimer1 clock deactivation.*/
#if SPC5_ICU_USE_ETIMER1
/* If it is the last active submodules then the eTimer1 is disabled.*/
if (icu_active_submodules1 == 0) {
if (icup->etimerp->ENBL.B.ENBL == 0) {
halSPCSetPeripheralClockMode(SPC5_ETIMER1_PCTL,
SPC5_ICU_ETIMER1_STOP_PCTL);
}
}
#endif
/* eTimer2 clock deactivation.*/
#if SPC5_ICU_USE_ETIMER2
/* If it is the last active submodules then the eTimer2 is disabled.*/
if (icu_active_submodules2 == 0) {
if (icup->etimerp->ENBL.B.ENBL == 0) {
halSPCSetPeripheralClockMode(SPC5_ETIMER2_PCTL,
SPC5_ICU_ETIMER2_STOP_PCTL);
}
}
#endif
}
}
/**
* @brief Enables the input capture.
*
* @param[in] icup pointer to the @p ICUDriver object
*
* @notapi
*/
void icu_lld_enable(ICUDriver *icup) {
/* Clear pending IRQs (if any).*/
icup->etimerp->CHANNEL[icup->smod_number].STS.R = 0xFFFF;
/* Set Capture 1 and Capture 2 Mode.*/
icup->etimerp->CHANNEL[icup->smod_number].CCCTRL.B.CPT1MODE =
SPC5_ETIMER_CPT1MODE_RISING_EDGE;
icup->etimerp->CHANNEL[icup->smod_number].CTRL3.B.ROC =
SPC5_ETIMER_ROC_REL_ON_CAP1;
icup->etimerp->CHANNEL[icup->smod_number].CCCTRL.B.CPT2MODE =
SPC5_ETIMER_CPT2MODE_FALLING_EDGE;
/* Active interrupts.*/
if (icup->config->period_cb != NULL || icup->config->width_cb != NULL) {
icup->etimerp->CHANNEL[icup->smod_number].INTDMA.B.ICF1IE = 1U;
icup->etimerp->CHANNEL[icup->smod_number].INTDMA.B.ICF2IE = 1U;
}
if (icup->config->overflow_cb != NULL) {
icup->etimerp->CHANNEL[icup->smod_number].INTDMA.B.TOFIE = 1U;
}
/* Set Capture FIFO Water Mark.*/
icup->etimerp->CHANNEL[icup->smod_number].CCCTRL.B.CFWM = 0U;
/* Enable Counter.*/
if (ICU_SKIP_FIRST_CAPTURE) {
icup->etimerp->CHANNEL[icup->smod_number].CTRL.B.CNTMODE =
SPC5_ETIMER_CNTMODE_RFE_SIHA;
}
else {
icup->etimerp->CHANNEL[icup->smod_number].CTRL.B.CNTMODE =
SPC5_ETIMER_CNTMODE_RE;
}
/* Enable Capture process.*/
icup->etimerp->CHANNEL[icup->smod_number].CCCTRL.B.ARM = 1U;
}
/**
* @brief Disables the input capture.
*
* @param[in] icup pointer to the @p ICUDriver object
*
* @notapi
*/
void icu_lld_disable(ICUDriver *icup) {
/* Disable Capture process.*/
icup->etimerp->CHANNEL[icup->smod_number].CCCTRL.B.ARM = 0U;
/* Clear pending IRQs (if any).*/
icup->etimerp->CHANNEL[icup->smod_number].STS.R = 0xFFFF;
/* Set Capture 1 and Capture 2 Mode to Disabled.*/
icup->etimerp->CHANNEL[icup->smod_number].CCCTRL.B.CPT1MODE =
SPC5_ETIMER_CPT1MODE_DISABLED;
icup->etimerp->CHANNEL[icup->smod_number].CCCTRL.B.CPT2MODE =
SPC5_ETIMER_CPT2MODE_DISABLED;
/* Disable interrupts.*/
if (icup->config->period_cb != NULL || icup->config->width_cb != NULL) {
icup->etimerp->CHANNEL[icup->smod_number].INTDMA.B.ICF1IE = 0U;
icup->etimerp->CHANNEL[icup->smod_number].INTDMA.B.ICF2IE = 0U;
}
if (icup->config->overflow_cb != NULL)
icup->etimerp->CHANNEL[icup->smod_number].INTDMA.B.TOFIE = 0U;
}
#endif /* HAL_USE_ICU */
/** @} */
Reference in New Issue View Git Blame Copy Permalink