tinySA/os/hal/ports/STM32/LLD/SDIOv1/sdc_lld.h

331 lines
10 KiB
C

/*
ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
/**
* @file STM32/SDIOv1/sdc_lld.h
* @brief STM32 SDC subsystem low level driver header.
*
* @addtogroup SDC
* @{
*/
#ifndef _SDC_LLD_H_
#define _SDC_LLD_H_
#if HAL_USE_SDC || defined(__DOXYGEN__)
/*===========================================================================*/
/* Driver constants. */
/*===========================================================================*/
/**
* @brief Value to clear all interrupts flag at once.
*/
#define STM32_SDIO_ICR_ALL_FLAGS (SDIO_ICR_CCRCFAILC | SDIO_ICR_DCRCFAILC | \
SDIO_ICR_CTIMEOUTC | SDIO_ICR_DTIMEOUTC | \
SDIO_ICR_TXUNDERRC | SDIO_ICR_RXOVERRC | \
SDIO_ICR_CMDRENDC | SDIO_ICR_CMDSENTC | \
SDIO_ICR_DATAENDC | SDIO_ICR_STBITERRC | \
SDIO_ICR_DBCKENDC | SDIO_ICR_SDIOITC | \
SDIO_ICR_CEATAENDC)
/**
* @brief Mask of error flags in STA register.
*/
#define STM32_SDIO_STA_ERROR_MASK (SDIO_STA_CCRCFAIL | SDIO_STA_DCRCFAIL | \
SDIO_STA_CTIMEOUT | SDIO_STA_DTIMEOUT | \
SDIO_STA_TXUNDERR | SDIO_STA_RXOVERR)
/*===========================================================================*/
/* Driver pre-compile time settings. */
/*===========================================================================*/
/**
* @name Configuration options
* @{
*/
/**
* @brief SDIO DMA priority (0..3|lowest..highest).
*/
#if !defined(STM32_SDC_SDIO_DMA_PRIORITY) || defined(__DOXYGEN__)
#define STM32_SDC_SDIO_DMA_PRIORITY 3
#endif
/**
* @brief SDIO interrupt priority level setting.
*/
#if !defined(STM32_SDC_SDIO_IRQ_PRIORITY) || defined(__DOXYGEN__)
#define STM32_SDC_SDIO_IRQ_PRIORITY 9
#endif
/**
* @brief Write timeout in milliseconds.
*/
#if !defined(STM32_SDC_WRITE_TIMEOUT_MS) || defined(__DOXYGEN__)
#define STM32_SDC_WRITE_TIMEOUT_MS 250
#endif
/**
* @brief Read timeout in milliseconds.
*/
#if !defined(STM32_SDC_READ_TIMEOUT_MS) || defined(__DOXYGEN__)
#define STM32_SDC_READ_TIMEOUT_MS 25
#endif
/**
* @brief Card clock activation delay in milliseconds.
*/
#if !defined(STM32_SDC_CLOCK_ACTIVATION_DELAY) || defined(__DOXYGEN__)
#define STM32_SDC_CLOCK_ACTIVATION_DELAY 10
#endif
/**
* @brief Support for unaligned transfers.
* @note Unaligned transfers are much slower.
*/
#if !defined(STM32_SDC_SDIO_UNALIGNED_SUPPORT) || defined(__DOXYGEN__)
#define STM32_SDC_SDIO_UNALIGNED_SUPPORT TRUE
#endif
/** @} */
/*===========================================================================*/
/* Derived constants and error checks. */
/*===========================================================================*/
#if !STM32_HAS_SDIO
#error "SDIO not present in the selected device"
#endif
#if !OSAL_IRQ_IS_VALID_PRIORITY(STM32_SDC_SDIO_IRQ_PRIORITY)
#error "Invalid IRQ priority assigned to SDIO"
#endif
#if !STM32_DMA_IS_VALID_PRIORITY(STM32_SDC_SDIO_DMA_PRIORITY)
#error "Invalid DMA priority assigned to SDIO"
#endif
/* The following checks are only required when there is a DMA able to
reassign streams to different channels.*/
#if STM32_ADVANCED_DMA
/* Check on the presence of the DMA streams settings in mcuconf.h.*/
#if !defined(STM32_SDC_SDIO_DMA_STREAM)
#error "SDIO DMA streams not defined"
#endif
/* Check on the validity of the assigned DMA channels.*/
#if !STM32_DMA_IS_VALID_ID(STM32_SDC_SDIO_DMA_STREAM, STM32_SDC_SDIO_DMA_MSK)
#error "invalid DMA stream associated to SDIO"
#endif
#endif /* STM32_ADVANCED_DMA */
#if !defined(STM32_DMA_REQUIRED)
#define STM32_DMA_REQUIRED
#endif
/*
* SDIO clock divider.
*/
#if (defined(STM32F4XX) || defined(STM32F2XX))
#define STM32_SDIO_DIV_HS 0
#define STM32_SDIO_DIV_LS 120
#elif STM32_HCLK > 48000000
#define STM32_SDIO_DIV_HS 1
#define STM32_SDIO_DIV_LS 178
#else
#define STM32_SDIO_DIV_HS 0
#define STM32_SDIO_DIV_LS 118
#endif
/**
* @brief SDIO data timeouts in SDIO clock cycles.
*/
#if (defined(STM32F4XX) || defined(STM32F2XX))
#if !STM32_CLOCK48_REQUIRED
#error "SDIO requires STM32_CLOCK48_REQUIRED to be enabled"
#endif
#if STM32_PLL48CLK != 48000000
#error "invalid STM32_PLL48CLK clock value"
#endif
#define STM32_SDC_WRITE_TIMEOUT \
(((STM32_PLL48CLK / (STM32_SDIO_DIV_HS + 2)) / 1000) * \
STM32_SDC_WRITE_TIMEOUT_MS)
#define STM32_SDC_READ_TIMEOUT \
(((STM32_PLL48CLK / (STM32_SDIO_DIV_HS + 2)) / 1000) * \
STM32_SDC_READ_TIMEOUT_MS)
#else /* !(defined(STM32F4XX) || defined(STM32F2XX)) */
#define STM32_SDC_WRITE_TIMEOUT \
(((STM32_HCLK / (STM32_SDIO_DIV_HS + 2)) / 1000) * \
STM32_SDC_WRITE_TIMEOUT_MS)
#define STM32_SDC_READ_TIMEOUT \
(((STM32_HCLK / (STM32_SDIO_DIV_HS + 2)) / 1000) * \
STM32_SDC_READ_TIMEOUT_MS)
#endif /* !(defined(STM32F4XX) || defined(STM32F2XX)) */
/*===========================================================================*/
/* Driver data structures and types. */
/*===========================================================================*/
/**
* @brief Type of card flags.
*/
typedef uint32_t sdcmode_t;
/**
* @brief SDC Driver condition flags type.
*/
typedef uint32_t sdcflags_t;
/**
* @brief Type of a structure representing an SDC driver.
*/
typedef struct SDCDriver SDCDriver;
/**
* @brief Driver configuration structure.
* @note It could be empty on some architectures.
*/
typedef struct {
/**
* @brief Working area for memory consuming operations.
* @note Buffer must be word aligned and big enough to store 512 bytes.
* @note It is mandatory for detecting MMC cards bigger than 2GB else it
* can be @p NULL. SD cards do NOT need it.
* @note Memory pointed by this buffer is only used by @p sdcConnect(),
* afterward it can be reused for other purposes.
*/
uint8_t *scratchpad;
/**
* @brief Bus width.
*/
sdcbusmode_t bus_width;
/* End of the mandatory fields.*/
} SDCConfig;
/**
* @brief @p SDCDriver specific methods.
*/
#define _sdc_driver_methods \
_mmcsd_block_device_methods
/**
* @extends MMCSDBlockDeviceVMT
*
* @brief @p SDCDriver virtual methods table.
*/
struct SDCDriverVMT {
_sdc_driver_methods
};
/**
* @brief Structure representing an SDC driver.
*/
struct SDCDriver {
/**
* @brief Virtual Methods Table.
*/
const struct SDCDriverVMT *vmt;
_mmcsd_block_device_data
/**
* @brief Current configuration data.
*/
const SDCConfig *config;
/**
* @brief Various flags regarding the mounted card.
*/
sdcmode_t cardmode;
/**
* @brief Errors flags.
*/
sdcflags_t errors;
/**
* @brief Card RCA.
*/
uint32_t rca;
/* End of the mandatory fields.*/
/**
* @brief Thread waiting for I/O completion IRQ.
*/
thread_reference_t thread;
/**
* @brief DMA mode bit mask.
*/
uint32_t dmamode;
/**
* @brief Transmit DMA channel.
*/
const stm32_dma_stream_t *dma;
/**
* @brief Pointer to the SDIO registers block.
* @note Needed for debugging aid.
*/
SDIO_TypeDef *sdio;
};
/*===========================================================================*/
/* Driver macros. */
/*===========================================================================*/
/*===========================================================================*/
/* External declarations. */
/*===========================================================================*/
#if !defined(__DOXYGEN__)
extern SDCDriver SDCD1;
#endif
#ifdef __cplusplus
extern "C" {
#endif
void sdc_lld_init(void);
void sdc_lld_start(SDCDriver *sdcp);
void sdc_lld_stop(SDCDriver *sdcp);
void sdc_lld_start_clk(SDCDriver *sdcp);
void sdc_lld_set_data_clk(SDCDriver *sdcp, sdcbusclk_t clk);
void sdc_lld_stop_clk(SDCDriver *sdcp);
void sdc_lld_set_bus_mode(SDCDriver *sdcp, sdcbusmode_t mode);
void sdc_lld_send_cmd_none(SDCDriver *sdcp, uint8_t cmd, uint32_t arg);
bool sdc_lld_send_cmd_short(SDCDriver *sdcp, uint8_t cmd, uint32_t arg,
uint32_t *resp);
bool sdc_lld_send_cmd_short_crc(SDCDriver *sdcp, uint8_t cmd, uint32_t arg,
uint32_t *resp);
bool sdc_lld_send_cmd_long_crc(SDCDriver *sdcp, uint8_t cmd, uint32_t arg,
uint32_t *resp);
bool sdc_lld_read_special(SDCDriver *sdcp, uint8_t *buf, size_t bytes,
uint8_t cmd, uint32_t argument);
bool sdc_lld_read(SDCDriver *sdcp, uint32_t startblk,
uint8_t *buf, uint32_t blocks);
bool sdc_lld_write(SDCDriver *sdcp, uint32_t startblk,
const uint8_t *buf, uint32_t blocks);
bool sdc_lld_sync(SDCDriver *sdcp);
bool sdc_lld_is_card_inserted(SDCDriver *sdcp);
bool sdc_lld_is_write_protected(SDCDriver *sdcp);
#ifdef __cplusplus
}
#endif
#endif /* HAL_USE_SDC */
#endif /* _SDC_LLD_H_ */
/** @} */