tinySA/os/hal/ports/STM32/LLD/USBv1/usb_lld.h

429 lines
13 KiB
C

/*
ChibiOS/HAL - Copyright (C) 2006-2014 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
/**
* @file STM32/USBv1/usb_lld.h
* @brief STM32 USB subsystem low level driver header.
*
* @addtogroup USB
* @{
*/
#ifndef _USB_LLD_H_
#define _USB_LLD_H_
#if HAL_USE_USB || defined(__DOXYGEN__)
#include "stm32_usb.h"
/*===========================================================================*/
/* Driver constants. */
/*===========================================================================*/
/**
* @brief Maximum endpoint address.
*/
#define USB_MAX_ENDPOINTS USB_ENDOPOINTS_NUMBER
/**
* @brief Status stage handling method.
*/
#define USB_EP0_STATUS_STAGE USB_EP0_STATUS_STAGE_SW
/**
* @brief This device requires the address change after the status packet.
*/
#define USB_SET_ADDRESS_MODE USB_LATE_SET_ADDRESS
/*===========================================================================*/
/* Driver pre-compile time settings. */
/*===========================================================================*/
/**
* @brief USB1 driver enable switch.
* @details If set to @p TRUE the support for USB1 is included.
* @note The default is @p TRUE.
*/
#if !defined(STM32_USB_USE_USB1) || defined(__DOXYGEN__)
#define STM32_USB_USE_USB1 FALSE
#endif
/**
* @brief Enables the USB device low power mode on suspend.
*/
#if !defined(STM32_USB_LOW_POWER_ON_SUSPEND) || defined(__DOXYGEN__)
#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE
#endif
/**
* @brief USB1 interrupt priority level setting.
*/
#if !defined(STM32_USB_USB1_HP_IRQ_PRIORITY) || defined(__DOXYGEN__)
#define STM32_USB_USB1_HP_IRQ_PRIORITY 13
#endif
/**
* @brief USB1 interrupt priority level setting.
*/
#if !defined(STM32_USB_USB1_LP_IRQ_PRIORITY) || defined(__DOXYGEN__)
#define STM32_USB_USB1_LP_IRQ_PRIORITY 14
#endif
/*===========================================================================*/
/* Derived constants and error checks. */
/*===========================================================================*/
#if STM32_USB_USE_USB1 && !STM32_HAS_USB
#error "USB not present in the selected device"
#endif
#if !STM32_USB_USE_USB1
#error "USB driver activated but no USB peripheral assigned"
#endif
#if STM32_USB_USE_USB1 && \
!CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_USB_USB1_HP_IRQ_PRIORITY)
#error "Invalid IRQ priority assigned to USB HP"
#endif
#if STM32_USB_USE_USB1 && \
!CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_USB_USB1_LP_IRQ_PRIORITY)
#error "Invalid IRQ priority assigned to USB LP"
#endif
#if STM32_USBCLK != 48000000
#error "the USB driver requires a 48MHz clock"
#endif
/*===========================================================================*/
/* Driver data structures and types. */
/*===========================================================================*/
/**
* @brief Type of an IN endpoint state structure.
*/
typedef struct {
/**
* @brief Buffer mode, queue or linear.
*/
bool txqueued;
/**
* @brief Requested transmit transfer size.
*/
size_t txsize;
/**
* @brief Transmitted bytes so far.
*/
size_t txcnt;
union {
struct {
/**
* @brief Pointer to the transmission linear buffer.
*/
const uint8_t *txbuf;
} linear;
struct {
/**
* @brief Pointer to the output queue.
*/
output_queue_t *txqueue;
} queue;
/* End of the mandatory fields.*/
} mode;
} USBInEndpointState;
/**
* @brief Type of an OUT endpoint state structure.
*/
typedef struct {
/**
* @brief Buffer mode, queue or linear.
*/
bool rxqueued;
/**
* @brief Requested receive transfer size.
*/
size_t rxsize;
/**
* @brief Received bytes so far.
*/
size_t rxcnt;
union {
struct {
/**
* @brief Pointer to the receive linear buffer.
*/
uint8_t *rxbuf;
} linear;
struct {
/**
* @brief Pointer to the input queue.
*/
input_queue_t *rxqueue;
} queue;
} mode;
/* End of the mandatory fields.*/
/**
* @brief Number of packets to receive.
*/
uint16_t rxpkts;
} USBOutEndpointState;
/**
* @brief Type of an USB endpoint configuration structure.
* @note Platform specific restrictions may apply to endpoints.
*/
typedef struct {
/**
* @brief Type and mode of the endpoint.
*/
uint32_t ep_mode;
/**
* @brief Setup packet notification callback.
* @details This callback is invoked when a setup packet has been
* received.
* @post The application must immediately call @p usbReadPacket() in
* order to access the received packet.
* @note This field is only valid for @p USB_EP_MODE_TYPE_CTRL
* endpoints, it should be set to @p NULL for other endpoint
* types.
*/
usbepcallback_t setup_cb;
/**
* @brief IN endpoint notification callback.
* @details This field must be set to @p NULL if the IN endpoint is not
* used.
*/
usbepcallback_t in_cb;
/**
* @brief OUT endpoint notification callback.
* @details This field must be set to @p NULL if the OUT endpoint is not
* used.
*/
usbepcallback_t out_cb;
/**
* @brief IN endpoint maximum packet size.
* @details This field must be set to zero if the IN endpoint is not
* used.
*/
uint16_t in_maxsize;
/**
* @brief OUT endpoint maximum packet size.
* @details This field must be set to zero if the OUT endpoint is not
* used.
*/
uint16_t out_maxsize;
/**
* @brief @p USBEndpointState associated to the IN endpoint.
* @details This structure maintains the state of the IN endpoint.
*/
USBInEndpointState *in_state;
/**
* @brief @p USBEndpointState associated to the OUT endpoint.
* @details This structure maintains the state of the OUT endpoint.
*/
USBOutEndpointState *out_state;
/* End of the mandatory fields.*/
/**
* @brief Reserved field, not currently used.
* @note Initialize this field to 1 in order to be forward compatible.
*/
uint16_t ep_buffers;
/**
* @brief Pointer to a buffer for setup packets.
* @details Setup packets require a dedicated 8-bytes buffer, set this
* field to @p NULL for non-control endpoints.
*/
uint8_t *setup_buf;
} USBEndpointConfig;
/**
* @brief Type of an USB driver configuration structure.
*/
typedef struct {
/**
* @brief USB events callback.
* @details This callback is invoked when an USB driver event is registered.
*/
usbeventcb_t event_cb;
/**
* @brief Device GET_DESCRIPTOR request callback.
* @note This callback is mandatory and cannot be set to @p NULL.
*/
usbgetdescriptor_t get_descriptor_cb;
/**
* @brief Requests hook callback.
* @details This hook allows to be notified of standard requests or to
* handle non standard requests.
*/
usbreqhandler_t requests_hook_cb;
/**
* @brief Start Of Frame callback.
*/
usbcallback_t sof_cb;
/* End of the mandatory fields.*/
} USBConfig;
/**
* @brief Structure representing an USB driver.
*/
struct USBDriver {
/**
* @brief Driver state.
*/
usbstate_t state;
/**
* @brief Current configuration data.
*/
const USBConfig *config;
/**
* @brief Bit map of the transmitting IN endpoints.
*/
uint16_t transmitting;
/**
* @brief Bit map of the receiving OUT endpoints.
*/
uint16_t receiving;
/**
* @brief Active endpoints configurations.
*/
const USBEndpointConfig *epc[USB_MAX_ENDPOINTS + 1];
/**
* @brief Fields available to user, it can be used to associate an
* application-defined handler to an IN endpoint.
* @note The base index is one, the endpoint zero does not have a
* reserved element in this array.
*/
void *in_params[USB_MAX_ENDPOINTS];
/**
* @brief Fields available to user, it can be used to associate an
* application-defined handler to an OUT endpoint.
* @note The base index is one, the endpoint zero does not have a
* reserved element in this array.
*/
void *out_params[USB_MAX_ENDPOINTS];
/**
* @brief Endpoint 0 state.
*/
usbep0state_t ep0state;
/**
* @brief Next position in the buffer to be transferred through endpoint 0.
*/
uint8_t *ep0next;
/**
* @brief Number of bytes yet to be transferred through endpoint 0.
*/
size_t ep0n;
/**
* @brief Endpoint 0 end transaction callback.
*/
usbcallback_t ep0endcb;
/**
* @brief Setup packet buffer.
*/
uint8_t setup[8];
/**
* @brief Current USB device status.
*/
uint16_t status;
/**
* @brief Assigned USB address.
*/
uint8_t address;
/**
* @brief Current USB device configuration.
*/
uint8_t configuration;
#if defined(USB_DRIVER_EXT_FIELDS)
USB_DRIVER_EXT_FIELDS
#endif
/* End of the mandatory fields.*/
/**
* @brief Pointer to the next address in the packet memory.
*/
uint32_t pmnext;
};
/*===========================================================================*/
/* Driver macros. */
/*===========================================================================*/
/**
* @brief Returns the current frame number.
*
* @param[in] usbp pointer to the @p USBDriver object
* @return The current frame number.
*
* @notapi
*/
#define usb_lld_get_frame_number(usbp) (STM32_USB->FNR & FNR_FN_MASK)
/**
* @brief Returns the exact size of a receive transaction.
* @details The received size can be different from the size specified in
* @p usbStartReceiveI() because the last packet could have a size
* different from the expected one.
* @pre The OUT endpoint must have been configured in transaction mode
* in order to use this function.
*
* @param[in] usbp pointer to the @p USBDriver object
* @param[in] ep endpoint number
* @return Received data size.
*
* @notapi
*/
#define usb_lld_get_transaction_size(usbp, ep) \
((usbp)->epc[ep]->out_state->rxcnt)
/*===========================================================================*/
/* External declarations. */
/*===========================================================================*/
#if STM32_USB_USE_USB1 && !defined(__DOXYGEN__)
extern USBDriver USBD1;
#endif
#ifdef __cplusplus
extern "C" {
#endif
void usb_lld_init(void);
void usb_lld_start(USBDriver *usbp);
void usb_lld_stop(USBDriver *usbp);
void usb_lld_reset(USBDriver *usbp);
void usb_lld_set_address(USBDriver *usbp);
void usb_lld_init_endpoint(USBDriver *usbp, usbep_t ep);
void usb_lld_disable_endpoints(USBDriver *usbp);
usbepstatus_t usb_lld_get_status_in(USBDriver *usbp, usbep_t ep);
usbepstatus_t usb_lld_get_status_out(USBDriver *usbp, usbep_t ep);
void usb_lld_read_setup(USBDriver *usbp, usbep_t ep, uint8_t *buf);
void usb_lld_prepare_receive(USBDriver *usbp, usbep_t ep);
void usb_lld_prepare_transmit(USBDriver *usbp, usbep_t ep);
void usb_lld_start_out(USBDriver *usbp, usbep_t ep);
void usb_lld_start_in(USBDriver *usbp, usbep_t ep);
void usb_lld_stall_out(USBDriver *usbp, usbep_t ep);
void usb_lld_stall_in(USBDriver *usbp, usbep_t ep);
void usb_lld_clear_out(USBDriver *usbp, usbep_t ep);
void usb_lld_clear_in(USBDriver *usbp, usbep_t ep);
#ifdef __cplusplus
}
#endif
#endif /* HAL_USE_USB */
#endif /* _USB_LLD_H_ */
/** @} */