zcy
/
tinySA
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
tinySA/os/hal/ports/STM32/LLD/USARTv1/uart_lld.h

604 lines
20 KiB
C
Raw Blame History

/*
ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
/**
* @file STM32/USARTv1/uart_lld.h
* @brief STM32 low level UART driver header.
*
* @addtogroup UART
* @{
*/
#ifndef _UART_LLD_H_
#define _UART_LLD_H_
#if HAL_USE_UART || defined(__DOXYGEN__)
/*===========================================================================*/
/* Driver constants. */
/*===========================================================================*/
/*===========================================================================*/
/* Driver pre-compile time settings. */
/*===========================================================================*/
/**
* @name Configuration options
* @{
*/
/**
* @brief UART driver on USART1 enable switch.
* @details If set to @p TRUE the support for USART1 is included.
* @note The default is @p FALSE.
*/
#if !defined(STM32_UART_USE_USART1) || defined(__DOXYGEN__)
#define STM32_UART_USE_USART1 FALSE
#endif
/**
* @brief UART driver on USART2 enable switch.
* @details If set to @p TRUE the support for USART2 is included.
* @note The default is @p FALSE.
*/
#if !defined(STM32_UART_USE_USART2) || defined(__DOXYGEN__)
#define STM32_UART_USE_USART2 FALSE
#endif
/**
* @brief UART driver on USART3 enable switch.
* @details If set to @p TRUE the support for USART3 is included.
* @note The default is @p FALSE.
*/
#if !defined(STM32_UART_USE_USART3) || defined(__DOXYGEN__)
#define STM32_UART_USE_USART3 FALSE
#endif
/**
* @brief UART driver on UART4 enable switch.
* @details If set to @p TRUE the support for UART4 is included.
* @note The default is @p FALSE.
*/
#if !defined(STM32_UART_USE_UART4) || defined(__DOXYGEN__)
#define STM32_UART_USE_UART4 FALSE
#endif
/**
* @brief UART driver on UART5 enable switch.
* @details If set to @p TRUE the support for UART5 is included.
* @note The default is @p FALSE.
*/
#if !defined(STM32_UART_USE_UART5) || defined(__DOXYGEN__)
#define STM32_UART_USE_UART5 FALSE
#endif
/**
* @brief UART driver on USART6 enable switch.
* @details If set to @p TRUE the support for USART6 is included.
* @note The default is @p FALSE.
*/
#if !defined(STM32_UART_USE_USART6) || defined(__DOXYGEN__)
#define STM32_UART_USE_USART6 FALSE
#endif
/**
* @brief USART1 interrupt priority level setting.
*/
#if !defined(STM32_UART_USART1_IRQ_PRIORITY) || defined(__DOXYGEN__)
#define STM32_UART_USART1_IRQ_PRIORITY 12
#endif
/**
* @brief USART2 interrupt priority level setting.
*/
#if !defined(STM32_UART_USART2_IRQ_PRIORITY) || defined(__DOXYGEN__)
#define STM32_UART_USART2_IRQ_PRIORITY 12
#endif
/**
* @brief USART3 interrupt priority level setting.
*/
#if !defined(STM32_UART_USART3_IRQ_PRIORITY) || defined(__DOXYGEN__)
#define STM32_UART_USART3_IRQ_PRIORITY 12
#endif
/**
* @brief UART4 interrupt priority level setting.
*/
#if !defined(STM32_UART_UART4_IRQ_PRIORITY) || defined(__DOXYGEN__)
#define STM32_UART_UART4_IRQ_PRIORITY 12
#endif
/**
* @brief UART5 interrupt priority level setting.
*/
#if !defined(STM32_UART_UART5_IRQ_PRIORITY) || defined(__DOXYGEN__)
#define STM32_UART_UART5_IRQ_PRIORITY 12
#endif
/**
* @brief USART6 interrupt priority level setting.
*/
#if !defined(STM32_UART_USART6_IRQ_PRIORITY) || defined(__DOXYGEN__)
#define STM32_UART_USART6_IRQ_PRIORITY 12
#endif
/**
* @brief USART1 DMA priority (0..3|lowest..highest).
* @note The priority level is used for both the TX and RX DMA channels but
* because of the channels ordering the RX channel has always priority
* over the TX channel.
*/
#if !defined(STM32_UART_USART1_DMA_PRIORITY) || defined(__DOXYGEN__)
#define STM32_UART_USART1_DMA_PRIORITY 0
#endif
/**
* @brief USART2 DMA priority (0..3|lowest..highest).
* @note The priority level is used for both the TX and RX DMA channels but
* because of the channels ordering the RX channel has always priority
* over the TX channel.
*/
#if !defined(STM32_UART_USART2_DMA_PRIORITY) || defined(__DOXYGEN__)
#define STM32_UART_USART2_DMA_PRIORITY 0
#endif
/**
* @brief USART3 DMA priority (0..3|lowest..highest).
* @note The priority level is used for both the TX and RX DMA channels but
* because of the channels ordering the RX channel has always priority
* over the TX channel.
*/
#if !defined(STM32_UART_USART3_DMA_PRIORITY) || defined(__DOXYGEN__)
#define STM32_UART_USART3_DMA_PRIORITY 0
#endif
/**
* @brief UART4 DMA priority (0..3|lowest..highest).
* @note The priority level is used for both the TX and RX DMA channels but
* because of the channels ordering the RX channel has always priority
* over the TX channel.
*/
#if !defined(STM32_UART_UART4_DMA_PRIORITY) || defined(__DOXYGEN__)
#define STM32_UART_UART4_DMA_PRIORITY 0
#endif
/**
* @brief UART5 DMA priority (0..3|lowest..highest).
* @note The priority level is used for both the TX and RX DMA channels but
* because of the channels ordering the RX channel has always priority
* over the TX channel.
*/
#if !defined(STM32_UART_UART5_DMA_PRIORITY) || defined(__DOXYGEN__)
#define STM32_UART_UART5_DMA_PRIORITY 0
#endif
/**
* @brief USART6 DMA priority (0..3|lowest..highest).
* @note The priority level is used for both the TX and RX DMA channels but
* because of the channels ordering the RX channel has always priority
* over the TX channel.
*/
#if !defined(STM32_UART_USART6_DMA_PRIORITY) || defined(__DOXYGEN__)
#define STM32_UART_USART6_DMA_PRIORITY 0
#endif
/**
* @brief USART DMA error hook.
* @note The default action for DMA errors is a system halt because DMA
* error can only happen because programming errors.
*/
#if !defined(STM32_UART_DMA_ERROR_HOOK) || defined(__DOXYGEN__)
#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")
#endif
/** @} */
/*===========================================================================*/
/* Derived constants and error checks. */
/*===========================================================================*/
#if STM32_UART_USE_USART1 && !STM32_HAS_USART1
#error "USART1 not present in the selected device"
#endif
#if STM32_UART_USE_USART2 && !STM32_HAS_USART2
#error "USART2 not present in the selected device"
#endif
#if STM32_UART_USE_USART3 && !STM32_HAS_USART3
#error "USART3 not present in the selected device"
#endif
#if STM32_UART_USE_UART4
#if !STM32_HAS_UART4
#error "UART4 not present in the selected device"
#endif
#if !defined(STM32F2XX) && !defined(STM32F4XX)
#error "UART4 DMA access not supported in this platform"
#endif
#endif /* STM32_UART_USE_UART4 */
#if STM32_UART_USE_UART5
#if !STM32_HAS_UART5
#error "UART5 not present in the selected device"
#endif
#if !defined(STM32F2XX) && !defined(STM32F4XX)
#error "UART5 DMA access not supported in this platform"
#endif
#endif /* STM32_UART_USE_UART5 */
#if STM32_UART_USE_USART6 && !STM32_HAS_USART6
#error "USART6 not present in the selected device"
#endif
#if !STM32_UART_USE_USART1 && !STM32_UART_USE_USART2 && \
!STM32_UART_USE_USART3 && !STM32_UART_USE_UART4 && \
!STM32_UART_USE_UART5 && !STM32_UART_USE_USART6
#error "UART driver activated but no USART/UART peripheral assigned"
#endif
#if STM32_UART_USE_USART1 && \
!CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_UART_USART1_IRQ_PRIORITY)
#error "Invalid IRQ priority assigned to USART1"
#endif
#if STM32_UART_USE_USART2 && \
!CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_UART_USART2_IRQ_PRIORITY)
#error "Invalid IRQ priority assigned to USART2"
#endif
#if STM32_UART_USE_USART3 && \
!CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_UART_USART3_IRQ_PRIORITY)
#error "Invalid IRQ priority assigned to USART3"
#endif
#if STM32_UART_USE_UART4 && \
!CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_UART_UART4_IRQ_PRIORITY)
#error "Invalid IRQ priority assigned to UART4"
#endif
#if STM32_UART_USE_UART5 && \
!CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_UART_UART5_IRQ_PRIORITY)
#error "Invalid IRQ priority assigned to UART5"
#endif
#if STM32_UART_USE_USART6 && \
!CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_UART_USART6_IRQ_PRIORITY)
#error "Invalid IRQ priority assigned to USART6"
#endif
#if STM32_UART_USE_USART1 && \
!STM32_DMA_IS_VALID_PRIORITY(STM32_UART_USART1_DMA_PRIORITY)
#error "Invalid DMA priority assigned to USART1"
#endif
#if STM32_UART_USE_USART2 && \
!STM32_DMA_IS_VALID_PRIORITY(STM32_UART_USART2_DMA_PRIORITY)
#error "Invalid DMA priority assigned to USART2"
#endif
#if STM32_UART_USE_USART3 && \
!STM32_DMA_IS_VALID_PRIORITY(STM32_UART_USART3_DMA_PRIORITY)
#error "Invalid DMA priority assigned to USART3"
#endif
#if STM32_UART_USE_UART4 && \
!STM32_DMA_IS_VALID_PRIORITY(STM32_UART_UART4_DMA_PRIORITY)
#error "Invalid DMA priority assigned to UART4"
#endif
#if STM32_UART_USE_UART5 && \
!STM32_DMA_IS_VALID_PRIORITY(STM32_UART_UART5_DMA_PRIORITY)
#error "Invalid DMA priority assigned to UART5"
#endif
#if STM32_UART_USE_USART6 && \
!STM32_DMA_IS_VALID_PRIORITY(STM32_UART_USART6_DMA_PRIORITY)
#error "Invalid DMA priority assigned to USART6"
#endif
/* The following checks are only required when there is a DMA able to
reassign streams to different channels.*/
#if STM32_ADVANCED_DMA
/* Check on the presence of the DMA streams settings in mcuconf.h.*/
#if STM32_UART_USE_USART1 && (!defined(STM32_UART_USART1_RX_DMA_STREAM) || \
!defined(STM32_UART_USART1_TX_DMA_STREAM))
#error "USART1 DMA streams not defined"
#endif
#if STM32_UART_USE_USART2 && (!defined(STM32_UART_USART2_RX_DMA_STREAM) || \
!defined(STM32_UART_USART2_TX_DMA_STREAM))
#error "USART2 DMA streams not defined"
#endif
#if STM32_UART_USE_USART3 && (!defined(STM32_UART_USART3_RX_DMA_STREAM) || \
!defined(STM32_UART_USART3_TX_DMA_STREAM))
#error "USART3 DMA streams not defined"
#endif
#if STM32_UART_USE_UART4 && (!defined(STM32_UART_UART4_RX_DMA_STREAM) || \
!defined(STM32_UART_UART4_TX_DMA_STREAM))
#error "UART4 DMA streams not defined"
#endif
#if STM32_UART_USE_UART5 && (!defined(STM32_UART_UART5_RX_DMA_STREAM) || \
!defined(STM32_UART_UART5_TX_DMA_STREAM))
#error "UART5 DMA streams not defined"
#endif
#if STM32_UART_USE_USART6 && (!defined(STM32_UART_USART6_RX_DMA_STREAM) || \
!defined(STM32_UART_USART6_TX_DMA_STREAM))
#error "USART6 DMA streams not defined"
#endif
/* Check on the validity of the assigned DMA channels.*/
#if STM32_UART_USE_USART1 && \
!STM32_DMA_IS_VALID_ID(STM32_UART_USART1_RX_DMA_STREAM, \
STM32_USART1_RX_DMA_MSK)
#error "invalid DMA stream associated to USART1 RX"
#endif
#if STM32_UART_USE_USART1 && \
!STM32_DMA_IS_VALID_ID(STM32_UART_USART1_TX_DMA_STREAM, \
STM32_USART1_TX_DMA_MSK)
#error "invalid DMA stream associated to USART1 TX"
#endif
#if STM32_UART_USE_USART2 && \
!STM32_DMA_IS_VALID_ID(STM32_UART_USART2_RX_DMA_STREAM, \
STM32_USART2_RX_DMA_MSK)
#error "invalid DMA stream associated to USART2 RX"
#endif
#if STM32_UART_USE_USART2 && \
!STM32_DMA_IS_VALID_ID(STM32_UART_USART2_TX_DMA_STREAM, \
STM32_USART2_TX_DMA_MSK)
#error "invalid DMA stream associated to USART2 TX"
#endif
#if STM32_UART_USE_USART3 && \
!STM32_DMA_IS_VALID_ID(STM32_UART_USART3_RX_DMA_STREAM, \
STM32_USART3_RX_DMA_MSK)
#error "invalid DMA stream associated to USART3 RX"
#endif
#if STM32_UART_USE_USART3 && \
!STM32_DMA_IS_VALID_ID(STM32_UART_USART3_TX_DMA_STREAM, \
STM32_USART3_TX_DMA_MSK)
#error "invalid DMA stream associated to USART3 TX"
#endif
#if STM32_UART_USE_UART4 && \
!STM32_DMA_IS_VALID_ID(STM32_UART_UART4_RX_DMA_STREAM, \
STM32_UART4_RX_DMA_MSK)
#error "invalid DMA stream associated to UART4 RX"
#endif
#if STM32_UART_USE_UART4 && \
!STM32_DMA_IS_VALID_ID(STM32_UART_UART4_TX_DMA_STREAM, \
STM32_UART4_TX_DMA_MSK)
#error "invalid DMA stream associated to UART4 TX"
#endif
#if STM32_UART_USE_UART5 && \
!STM32_DMA_IS_VALID_ID(STM32_UART_UART5_RX_DMA_STREAM, \
STM32_UART5_RX_DMA_MSK)
#error "invalid DMA stream associated to UART5 RX"
#endif
#if STM32_UART_USE_UART5 && \
!STM32_DMA_IS_VALID_ID(STM32_UART_UART5_TX_DMA_STREAM, \
STM32_UART5_TX_DMA_MSK)
#error "invalid DMA stream associated to UART5 TX"
#endif
#if STM32_UART_USE_USART6 && \
!STM32_DMA_IS_VALID_ID(STM32_UART_USART6_RX_DMA_STREAM, \
STM32_USART6_RX_DMA_MSK)
#error "invalid DMA stream associated to USART6 RX"
#endif
#if STM32_UART_USE_USART6 && \
!STM32_DMA_IS_VALID_ID(STM32_UART_USART6_TX_DMA_STREAM, \
STM32_USART6_TX_DMA_MSK)
#error "invalid DMA stream associated to USART6 TX"
#endif
#endif /* STM32_ADVANCED_DMA */
#if !defined(STM32_DMA_REQUIRED)
#define STM32_DMA_REQUIRED
#endif
/*===========================================================================*/
/* Driver data structures and types. */
/*===========================================================================*/
/**
* @brief UART driver condition flags type.
*/
typedef uint32_t uartflags_t;
/**
* @brief Structure representing an UART driver.
*/
typedef struct UARTDriver UARTDriver;
/**
* @brief Generic UART notification callback type.
*
* @param[in] uartp pointer to the @p UARTDriver object
*/
typedef void (*uartcb_t)(UARTDriver *uartp);
/**
* @brief Character received UART notification callback type.
*
* @param[in] uartp pointer to the @p UARTDriver object
* @param[in] c received character
*/
typedef void (*uartccb_t)(UARTDriver *uartp, uint16_t c);
/**
* @brief Receive error UART notification callback type.
*
* @param[in] uartp pointer to the @p UARTDriver object
* @param[in] e receive error mask
*/
typedef void (*uartecb_t)(UARTDriver *uartp, uartflags_t e);
/**
* @brief Driver configuration structure.
* @note It could be empty on some architectures.
*/
typedef struct {
/**
* @brief End of transmission buffer callback.
*/
uartcb_t txend1_cb;
/**
* @brief Physical end of transmission callback.
*/
uartcb_t txend2_cb;
/**
* @brief Receive buffer filled callback.
*/
uartcb_t rxend_cb;
/**
* @brief Character received while out if the @p UART_RECEIVE state.
*/
uartccb_t rxchar_cb;
/**
* @brief Receive error callback.
*/
uartecb_t rxerr_cb;
/* End of the mandatory fields.*/
/**
* @brief Bit rate.
*/
uint32_t speed;
/**
* @brief Initialization value for the CR1 register.
*/
uint16_t cr1;
/**
* @brief Initialization value for the CR2 register.
*/
uint16_t cr2;
/**
* @brief Initialization value for the CR3 register.
*/
uint16_t cr3;
} UARTConfig;
/**
* @brief Structure representing an UART driver.
*/
struct UARTDriver {
/**
* @brief Driver state.
*/
uartstate_t state;
/**
* @brief Transmitter state.
*/
uarttxstate_t txstate;
/**
* @brief Receiver state.
*/
uartrxstate_t rxstate;
/**
* @brief Current configuration data.
*/
const UARTConfig *config;
#if defined(UART_DRIVER_EXT_FIELDS)
UART_DRIVER_EXT_FIELDS
#endif
/* End of the mandatory fields.*/
/**
* @brief Pointer to the USART registers block.
*/
USART_TypeDef *usart;
/**
* @brief DMA mode bit mask.
*/
uint32_t dmamode;
/**
* @brief Receive DMA channel.
*/
const stm32_dma_stream_t *dmarx;
/**
* @brief Transmit DMA channel.
*/
const stm32_dma_stream_t *dmatx;
/**
* @brief Default receive buffer while into @p UART_RX_IDLE state.
*/
volatile uint16_t rxbuf;
};
/*===========================================================================*/
/* Driver macros. */
/*===========================================================================*/
/*===========================================================================*/
/* External declarations. */
/*===========================================================================*/
#if STM32_UART_USE_USART1 && !defined(__DOXYGEN__)
extern UARTDriver UARTD1;
#endif
#if STM32_UART_USE_USART2 && !defined(__DOXYGEN__)
extern UARTDriver UARTD2;
#endif
#if STM32_UART_USE_USART3 && !defined(__DOXYGEN__)
extern UARTDriver UARTD3;
#endif
#if STM32_UART_USE_UART4 && !defined(__DOXYGEN__)
extern UARTDriver UARTD4;
#endif
#if STM32_UART_USE_UART5 && !defined(__DOXYGEN__)
extern UARTDriver UARTD5;
#endif
#if STM32_UART_USE_USART6 && !defined(__DOXYGEN__)
extern UARTDriver UARTD6;
#endif
#ifdef __cplusplus
extern "C" {
#endif
void uart_lld_init(void);
void uart_lld_start(UARTDriver *uartp);
void uart_lld_stop(UARTDriver *uartp);
void uart_lld_start_send(UARTDriver *uartp, size_t n, const void *txbuf);
size_t uart_lld_stop_send(UARTDriver *uartp);
void uart_lld_start_receive(UARTDriver *uartp, size_t n, void *rxbuf);
size_t uart_lld_stop_receive(UARTDriver *uartp);
#ifdef __cplusplus
}
#endif
#endif /* HAL_USE_UART */
#endif /* _UART_LLD_H_ */
/** @} */
Reference in New Issue View Git Blame Copy Permalink