tinySA/testhal/STM32F30x/IRQ_STORM
gdisirio 9a9b70a61a git-svn-id: svn://svn.code.sf.net/p/chibios/svn/branches/kernel_3_dev@6645 35acf78f-673a-0410-8e92-d51de3d6d3f4 2014-01-24 15:45:17 +00:00
..
.cproject git-svn-id: svn://svn.code.sf.net/p/chibios/svn/branches/kernel_3_dev@6262 35acf78f-673a-0410-8e92-d51de3d6d3f4 2013-09-05 09:01:21 +00:00
.project git-svn-id: svn://svn.code.sf.net/p/chibios/svn/branches/kernel_3_dev@6183 35acf78f-673a-0410-8e92-d51de3d6d3f4 2013-08-19 15:07:47 +00:00
Makefile git-svn-id: svn://svn.code.sf.net/p/chibios/svn/branches/kernel_3_dev@6645 35acf78f-673a-0410-8e92-d51de3d6d3f4 2014-01-24 15:45:17 +00:00
chconf.h git-svn-id: svn://svn.code.sf.net/p/chibios/svn/branches/kernel_3_dev@6632 35acf78f-673a-0410-8e92-d51de3d6d3f4 2014-01-20 09:38:35 +00:00
halconf.h git-svn-id: svn://svn.code.sf.net/p/chibios/svn/branches/kernel_3_dev@6180 35acf78f-673a-0410-8e92-d51de3d6d3f4 2013-08-19 14:07:53 +00:00
main.c git-svn-id: svn://svn.code.sf.net/p/chibios/svn/branches/kernel_3_dev@6337 35acf78f-673a-0410-8e92-d51de3d6d3f4 2013-09-30 13:04:10 +00:00
mcuconf.h git-svn-id: svn://svn.code.sf.net/p/chibios/svn/branches/kernel_3_dev@6295 35acf78f-673a-0410-8e92-d51de3d6d3f4 2013-09-12 13:33:12 +00:00
readme.txt git-svn-id: svn://svn.code.sf.net/p/chibios/svn/branches/kernel_3_dev@6177 35acf78f-673a-0410-8e92-d51de3d6d3f4 2013-08-19 13:46:54 +00:00

readme.txt

This file contains invisible Unicode characters!

This file contains invisible Unicode characters that may be processed differently from what appears below. If your use case is intentional and legitimate, you can safely ignore this warning. Use the Escape button to reveal hidden characters.

*****************************************************************************
** ChibiOS/RT HAL - IRQ_STORM stress test demo for STM32F30x.              **
*****************************************************************************

** TARGET **

The demo runs on an STMicroelectronics STM32F3-Discovery board.

** The Demo **

The application demonstrates the use of the STM32F30x GPT, PAL and Serial
drivers in order to implement a system stress demo.

** Board Setup **

- Connect an RS232 transceiver to pins PA9(TX) and PA10(RX).
- Connect a terminal emulator to the transceiver (38400-N-8-1).

** Build Procedure **

The demo has been tested using the free Codesourcery GCC-based toolchain
and YAGARTO.
Just modify the TRGT line in the makefile in order to use different GCC ports.

** Notes **

Some files used by the demo are not part of ChibiOS/RT but are copyright of
ST Microelectronics and are licensed under a different license.
Also note that not all the files present in the ST library are distributed
with ChibiOS/RT, you can find the whole library on the ST web site:

                             http://www.st.com