zcy
/
tinySA
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
tinySA/os/hal/platforms/AVR/pal_lld.h

334 lines
9.6 KiB
C
Raw Blame History

/*
ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
2011,2012 Giovanni Di Sirio.
This file is part of ChibiOS/RT.
ChibiOS/RT is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
ChibiOS/RT is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
/**
* @file AVR/pal_lld.h
* @brief AVR GPIO low level driver header.
*
* @addtogroup PAL
* @{
*/
#ifndef _PAL_LLD_H_
#define _PAL_LLD_H_
#if HAL_USE_PAL || defined(__DOXYGEN__)
/*===========================================================================*/
/* Unsupported modes and specific modes */
/*===========================================================================*/
#undef PAL_MODE_INPUT_PULLDOWN
#undef PAL_MODE_OUTPUT_OPENDRAIN
/*===========================================================================*/
/* I/O Ports Types and constants. */
/*===========================================================================*/
/**
* @brief Width, in bits, of an I/O port.
*/
#define PAL_IOPORTS_WIDTH 8
/**
* @brief Whole port mask.
* @details This macro specifies all the valid bits into a port.
*/
#define PAL_WHOLE_PORT ((ioportmask_t)0xFF)
/**
* @brief AVR setup registers.
*/
typedef struct {
uint8_t out;
uint8_t dir;
} avr_gpio_setup_t;
/**
* @brief AVR registers block.
* @note On some devices registers do not follow this layout on some
* ports, the ports with abnormal layout cannot be used through
* PAL driver. Example: PORT F on Mega128.
*/
typedef struct {
volatile uint8_t in;
volatile uint8_t dir;
volatile uint8_t out;
} avr_gpio_registers_t;
/**
* @brief Generic I/O ports static initializer.
* @details An instance of this structure must be passed to @p palInit() at
* system startup time in order to initialized the digital I/O
* subsystem. This represents only the initial setup, specific pads
* or whole ports can be reprogrammed at later time.
*/
typedef struct {
#if defined(PORTA) || defined(__DOXYGEN__)
avr_gpio_setup_t porta;
#endif
#if defined(PORTB) || defined(__DOXYGEN__)
avr_gpio_setup_t portb;
#endif
#if defined(PORTC) || defined(__DOXYGEN__)
avr_gpio_setup_t portc;
#endif
#if defined(PORTD) || defined(__DOXYGEN__)
avr_gpio_setup_t portd;
#endif
#if defined(PORTE) || defined(__DOXYGEN__)
avr_gpio_setup_t porte;
#endif
#if defined(PORTF) || defined(__DOXYGEN__)
avr_gpio_setup_t portf;
#endif
#if defined(PORTG) || defined(__DOXYGEN__)
avr_gpio_setup_t portg;
#endif
#if defined(PORTH) || defined(__DOXYGEN__)
avr_gpio_setup_t porth;
#endif
#if defined(PORTJ) || defined(__DOXYGEN__)
avr_gpio_setup_t portj;
#endif
#if defined(PORTK) || defined(__DOXYGEN__)
avr_gpio_setup_t portk;
#endif
#if defined(PORTL) || defined(__DOXYGEN__)
avr_gpio_setup_t portl;
#endif
} PALConfig;
/**
* @brief Digital I/O port sized unsigned type.
*/
typedef uint8_t ioportmask_t;
/**
* @brief Digital I/O modes.
*/
typedef uint8_t iomode_t;
/**
* @brief Port Identifier.
* @details This type can be a scalar or some kind of pointer, do not make
* any assumption about it, use the provided macros when populating
* variables of this type.
*/
typedef avr_gpio_registers_t *ioportid_t;
/*===========================================================================*/
/* I/O Ports Identifiers. */
/*===========================================================================*/
#if defined(PORTA) || defined(__DOXYGEN__)
/**
* @brief GPIO port A identifier.
*/
#define IOPORT1 ((volatile avr_gpio_registers_t *)&PINA)
#endif
#if defined(PORTB) || defined(__DOXYGEN__)
/**
* @brief GPIO port B identifier.
*/
#define IOPORT2 ((volatile avr_gpio_registers_t *)&PINB)
#endif
#if defined(PORTC) || defined(__DOXYGEN__)
/**
* @brief GPIO port C identifier.
*/
#define IOPORT3 ((volatile avr_gpio_registers_t *)&PINC)
#endif
#if defined(PORTD) || defined(__DOXYGEN__)
/**
* @brief GPIO port D identifier.
*/
#define IOPORT4 ((volatile avr_gpio_registers_t *)&PIND)
#endif
#if defined(PORTE) || defined(__DOXYGEN__)
/**
* @brief GPIO port E identifier.
*/
#define IOPORT5 ((volatile avr_gpio_registers_t *)&PINE)
#endif
#if defined(PORTF) || defined(__DOXYGEN__)
/**
* @brief GPIO port F identifier.
*/
#define IOPORT6 ((volatile avr_gpio_registers_t *)&PINF)
#endif
#if defined(PORTG) || defined(__DOXYGEN__)
/**
* @brief GPIO port G identifier.
*/
#define IOPORT7 ((volatile avr_gpio_registers_t *)&PING)
#endif
#if defined(PORTH) || defined(__DOXYGEN__)
/**
* @brief GPIO port H identifier.
*/
#define IOPORT8 ((volatile avr_gpio_registers_t *)&PINH)
#endif
#if defined(PORTJ) || defined(__DOXYGEN__)
/**
* @brief GPIO port J identifier.
*/
#define IOPORT9 ((volatile avr_gpio_registers_t *)&PINJ)
#endif
#if defined(PORTK) || defined(__DOXYGEN__)
/**
* @brief GPIO port K identifier.
*/
#define IOPORT10 ((volatile avr_gpio_registers_t *)&PINK)
#endif
#if defined(PORTL) || defined(__DOXYGEN__)
/**
* @brief GPIO port L identifier.
*/
#define IOPORT11 ((volatile avr_gpio_registers_t *)&PINL)
#endif
/*===========================================================================*/
/* Implementation, some of the following macros could be implemented as */
/* functions, if so please put them in pal_lld.c. */
/*===========================================================================*/
/**
* @brief Low level PAL subsystem initialization.
*
* @param[in] config the architecture-dependent ports configuration
*
* @notapi
*/
#define pal_lld_init(config) _pal_lld_init(config)
/**
* @brief Reads the physical I/O port states.
*
* @param[in] port port identifier
* @return The port bits.
*
* @notapi
*/
#define pal_lld_readport(port) ((port)->in)
/**
* @brief Reads the output latch.
* @details The purpose of this function is to read back the latched output
* value.
*
* @param[in] port port identifier
* @return The latched logical states.
*
* @notapi
*/
#define pal_lld_readlatch(port) ((port)->out)
/**
* @brief Writes a bits mask on a I/O port.
*
* @param[in] port port identifier
* @param[in] bits bits to be written on the specified port
*
* @notapi
*/
#define pal_lld_writeport(port, bits) ((port)->out = bits)
/**
* @brief Pads group mode setup.
* @details This function programs a pads group belonging to the same port
* with the specified mode.
* @note Programming an unknown or unsupported mode is silently ignored.
*
* @param[in] port port identifier
* @param[in] mask group mask
* @param[in] offset group bit offset within the port
* @param[in] mode group mode
*
* @notapi
*/
#define pal_lld_setgroupmode(port, mask, offset, mode) \
_pal_lld_setgroupmode(port, mask << offset, mode)
/**
* @brief Sets a pad logical state to @p PAL_HIGH.
*
* @param[in] port port identifier
* @param[in] pad pad number within the port
*
* @notapi
*/
#define pal_lld_setpad(port, pad) \
__asm__ __volatile__ \
( \
"sbi %0,%1\n\t" \
: \
: "I" (_SFR_IO_ADDR(port->out)), \
"I" (pad) \
\
)
/**
* @brief Clears a pad logical state to @p PAL_LOW.
*
* @param[in] port port identifier
* @param[in] pad pad number within the port
*
* @notapi
*/
#define pal_lld_clearpad(port, pad) \
__asm__ __volatile__ \
( \
"cbi %0,%1\n\t" \
: \
: "I" (_SFR_IO_ADDR(port->out)), \
"I" (pad) \
\
)
extern ROMCONST PALConfig pal_default_config;
#ifdef __cplusplus
extern "C" {
#endif
void _pal_lld_init(const PALConfig *config);
void _pal_lld_setgroupmode(ioportid_t port,
ioportmask_t mask,
iomode_t mode);
#ifdef __cplusplus
}
#endif
#endif /* HAL_USE_PAL */
#endif /* _PAL_LLD_H_ */
/** @} */
Reference in New Issue View Git Blame Copy Permalink