337 lines
10 KiB
C
337 lines
10 KiB
C
/*
|
|
ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
|
|
2011,2012 Giovanni Di Sirio.
|
|
|
|
This file is part of ChibiOS/RT.
|
|
|
|
ChibiOS/RT is free software; you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation; either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
ChibiOS/RT is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
/**
|
|
* @file STM32/sdc_lld.h
|
|
* @brief STM32 SDC subsystem low level driver header.
|
|
*
|
|
* @addtogroup SDC
|
|
* @{
|
|
*/
|
|
|
|
#ifndef _SDC_LLD_H_
|
|
#define _SDC_LLD_H_
|
|
|
|
#if HAL_USE_SDC || defined(__DOXYGEN__)
|
|
|
|
/*===========================================================================*/
|
|
/* Driver constants. */
|
|
/*===========================================================================*/
|
|
|
|
/**
|
|
* @brief Value to clear all interrupts flag at once.
|
|
*/
|
|
#define STM32_SDIO_ICR_ALL_FLAGS (SDIO_ICR_CCRCFAILC | SDIO_ICR_DCRCFAILC | \
|
|
SDIO_ICR_CTIMEOUTC | SDIO_ICR_DTIMEOUTC | \
|
|
SDIO_ICR_TXUNDERRC | SDIO_ICR_RXOVERRC | \
|
|
SDIO_ICR_CMDRENDC | SDIO_ICR_CMDSENTC | \
|
|
SDIO_ICR_DATAENDC | SDIO_ICR_STBITERRC | \
|
|
SDIO_ICR_DBCKENDC | SDIO_ICR_SDIOITC | \
|
|
SDIO_ICR_CEATAENDC)
|
|
|
|
/**
|
|
* @brief Mask of error flags in STA register.
|
|
*/
|
|
#define STM32_SDIO_STA_ERROR_MASK (SDIO_STA_CCRCFAIL | SDIO_STA_DCRCFAIL | \
|
|
SDIO_STA_CTIMEOUT | SDIO_STA_DTIMEOUT | \
|
|
SDIO_STA_TXUNDERR | SDIO_STA_RXOVERR)
|
|
|
|
/*===========================================================================*/
|
|
/* Driver pre-compile time settings. */
|
|
/*===========================================================================*/
|
|
|
|
/**
|
|
* @name Configuration options
|
|
* @{
|
|
*/
|
|
/**
|
|
* @brief SDIO DMA priority (0..3|lowest..highest).
|
|
*/
|
|
#if !defined(STM32_SDC_SDIO_DMA_PRIORITY) || defined(__DOXYGEN__)
|
|
#define STM32_SDC_SDIO_DMA_PRIORITY 3
|
|
#endif
|
|
|
|
/**
|
|
* @brief SDIO interrupt priority level setting.
|
|
*/
|
|
#if !defined(STM32_SDC_SDIO_IRQ_PRIORITY) || defined(__DOXYGEN__)
|
|
#define STM32_SDC_SDIO_IRQ_PRIORITY 9
|
|
#endif
|
|
|
|
/**
|
|
* @brief Write timeout in milliseconds.
|
|
*/
|
|
#if !defined(SDC_WRITE_TIMEOUT_MS) || defined(__DOXYGEN__)
|
|
#define SDC_WRITE_TIMEOUT_MS 250
|
|
#endif
|
|
|
|
/**
|
|
* @brief Read timeout in milliseconds.
|
|
*/
|
|
#if !defined(SDC_READ_TIMEOUT_MS) || defined(__DOXYGEN__)
|
|
#define SDC_READ_TIMEOUT_MS 5
|
|
#endif
|
|
|
|
/**
|
|
* @brief Support for unaligned transfers.
|
|
* @note Unaligned transfers are much slower.
|
|
*/
|
|
#if !defined(STM32_SDC_SDIO_UNALIGNED_SUPPORT) || defined(__DOXYGEN__)
|
|
#define STM32_SDC_SDIO_UNALIGNED_SUPPORT TRUE
|
|
#endif
|
|
|
|
#if STM32_ADVANCED_DMA || defined(__DOXYGEN__)
|
|
|
|
/**
|
|
* @brief DMA stream used for SDC operations.
|
|
* @note This option is only available on platforms with enhanced DMA.
|
|
*/
|
|
#if !defined(STM32_SDC_SDIO_DMA_STREAM) || defined(__DOXYGEN__)
|
|
#define STM32_SDC_SDIO_DMA_STREAM STM32_DMA_STREAM_ID(2, 3)
|
|
#endif
|
|
|
|
#else /* !STM32_ADVANCED_DMA*/
|
|
#define STM32_SDC_SDIO_DMA_STREAM STM32_DMA_STREAM_ID(2, 4)
|
|
|
|
#endif /* !STM32_ADVANCED_DMA*/
|
|
/** @} */
|
|
|
|
/*===========================================================================*/
|
|
/* Derived constants and error checks. */
|
|
/*===========================================================================*/
|
|
|
|
#if !STM32_HAS_SDIO
|
|
#error "SDIO not present in the selected device"
|
|
#endif
|
|
|
|
#if !defined(STM32_DMA_REQUIRED)
|
|
#define STM32_DMA_REQUIRED
|
|
#endif
|
|
|
|
/*
|
|
* SDIO clock divider.
|
|
*/
|
|
#if (defined(STM32F4XX) || defined(STM32F2XX))
|
|
#define STM32_SDIO_DIV_HS 0
|
|
#define STM32_SDIO_DIV_LS 120
|
|
|
|
#elif STM32_HCLK > 48000000
|
|
#define STM32_SDIO_DIV_HS 1
|
|
#define STM32_SDIO_DIV_LS 178
|
|
#else
|
|
|
|
#define STM32_SDIO_DIV_HS 0
|
|
#define STM32_SDIO_DIV_LS 118
|
|
#endif
|
|
|
|
/**
|
|
* @brief SDIO data timeouts in SDIO clock cycles.
|
|
*/
|
|
#if (defined(STM32F4XX) || defined(STM32F2XX))
|
|
#if !STM32_CLOCK48_REQUIRED
|
|
#error "SDIO requires STM32_CLOCK48_REQUIRED to be enabled"
|
|
#endif
|
|
|
|
#define STM32_SDC_WRITE_TIMEOUT \
|
|
(((STM32_PLL48CLK / (STM32_SDIO_DIV_HS + 2)) / 1000) * SDC_WRITE_TIMEOUT_MS)
|
|
#define STM32_SDC_READ_TIMEOUT \
|
|
(((STM32_PLL48CLK / (STM32_SDIO_DIV_HS + 2)) / 1000) * SDC_READ_TIMEOUT_MS)
|
|
|
|
#else
|
|
#define STM32_SDC_WRITE_TIMEOUT \
|
|
(((STM32_HCLK / (STM32_SDIO_DIV_HS + 2)) / 1000) * SDC_WRITE_TIMEOUT_MS)
|
|
#define STM32_SDC_READ_TIMEOUT \
|
|
(((STM32_HCLK / (STM32_SDIO_DIV_HS + 2)) / 1000) * SDC_READ_TIMEOUT_MS)
|
|
#endif
|
|
|
|
/*===========================================================================*/
|
|
/* Driver data structures and types. */
|
|
/*===========================================================================*/
|
|
|
|
/**
|
|
* @brief Type of SDIO bus mode.
|
|
*/
|
|
typedef enum {
|
|
SDC_MODE_1BIT = 0,
|
|
SDC_MODE_4BIT,
|
|
SDC_MODE_8BIT
|
|
} sdcbusmode_t;
|
|
|
|
/**
|
|
* @brief Type of card flags.
|
|
*/
|
|
typedef uint32_t sdcmode_t;
|
|
|
|
/**
|
|
* @brief SDC Driver condition flags type.
|
|
*/
|
|
typedef uint32_t sdcflags_t;
|
|
|
|
/**
|
|
* @brief Type of a structure representing an SDC driver.
|
|
*/
|
|
typedef struct SDCDriver SDCDriver;
|
|
|
|
/**
|
|
* @brief Driver configuration structure.
|
|
* @note It could be empty on some architectures.
|
|
*/
|
|
typedef struct {
|
|
uint32_t dummy;
|
|
} SDCConfig;
|
|
|
|
/**
|
|
* @brief @p SDCDriver specific methods.
|
|
*/
|
|
#define _sdc_driver_methods \
|
|
_mmcsd_block_device_methods
|
|
|
|
/**
|
|
* @extends MMCSDBlockDeviceVMT
|
|
*
|
|
* @brief @p SDCDriver virtual methods table.
|
|
*/
|
|
struct SDCDriverVMT {
|
|
_sdc_driver_methods
|
|
};
|
|
|
|
/**
|
|
* @brief Structure representing an SDC driver.
|
|
*/
|
|
struct SDCDriver {
|
|
/**
|
|
* @brief Virtual Methods Table.
|
|
*/
|
|
const struct SDCDriverVMT *vmt;
|
|
_mmcsd_block_device_data
|
|
/**
|
|
* @brief Driver state.
|
|
*/
|
|
sdcstate_t state;
|
|
/**
|
|
* @brief Current configuration data.
|
|
*/
|
|
const SDCConfig *config;
|
|
/**
|
|
* @brief Various flags regarding the mounted card.
|
|
*/
|
|
sdcmode_t cardmode;
|
|
/**
|
|
* @brief Errors flags.
|
|
*/
|
|
sdcflags_t errors;
|
|
/**
|
|
* @brief Card RCA.
|
|
*/
|
|
uint32_t rca;
|
|
/* End of the mandatory fields.*/
|
|
/**
|
|
* @brief Thread waiting for I/O completion IRQ.
|
|
*/
|
|
Thread *thread;
|
|
/**
|
|
* @brief DMA mode bit mask.
|
|
*/
|
|
uint32_t dmamode;
|
|
/**
|
|
* @brief Transmit DMA channel.
|
|
*/
|
|
const stm32_dma_stream_t *dma;
|
|
/**
|
|
* @brief Pointer to the SDIO registers block.
|
|
* @note Used only for dubugging purpose.
|
|
*/
|
|
#if CH_DBG_ENABLE_ASSERTS
|
|
SDIO_TypeDef *sdio;
|
|
#endif
|
|
};
|
|
|
|
/*===========================================================================*/
|
|
/* Driver macros. */
|
|
/*===========================================================================*/
|
|
|
|
/**
|
|
* @name R1 response utilities
|
|
* @{
|
|
*/
|
|
/**
|
|
* @brief Evaluates to @p TRUE if the R1 response contains error flags.
|
|
*
|
|
* @param[in] r1 the r1 response
|
|
*/
|
|
#define MMCSD_R1_ERROR(r1) (((r1) & MMCSD_R1_ERROR_MASK) != 0)
|
|
|
|
/**
|
|
* @brief Returns the status field of an R1 response.
|
|
*
|
|
* @param[in] r1 the r1 response
|
|
*/
|
|
#define MMCSD_R1_STS(r1) (((r1) >> 9) & 15)
|
|
|
|
/**
|
|
* @brief Evaluates to @p TRUE if the R1 response indicates a locked card.
|
|
*
|
|
* @param[in] r1 the r1 response
|
|
*/
|
|
#define MMCSD_R1_IS_CARD_LOCKED(r1) (((r1) >> 21) & 1)
|
|
/** @} */
|
|
|
|
/*===========================================================================*/
|
|
/* External declarations. */
|
|
/*===========================================================================*/
|
|
|
|
#if !defined(__DOXYGEN__)
|
|
extern SDCDriver SDCD1;
|
|
#endif
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
void sdc_lld_init(void);
|
|
void sdc_lld_start(SDCDriver *sdcp);
|
|
void sdc_lld_stop(SDCDriver *sdcp);
|
|
void sdc_lld_start_clk(SDCDriver *sdcp);
|
|
void sdc_lld_set_data_clk(SDCDriver *sdcp);
|
|
void sdc_lld_stop_clk(SDCDriver *sdcp);
|
|
void sdc_lld_set_bus_mode(SDCDriver *sdcp, sdcbusmode_t mode);
|
|
void sdc_lld_send_cmd_none(SDCDriver *sdcp, uint8_t cmd, uint32_t arg);
|
|
bool_t sdc_lld_send_cmd_short(SDCDriver *sdcp, uint8_t cmd, uint32_t arg,
|
|
uint32_t *resp);
|
|
bool_t sdc_lld_send_cmd_short_crc(SDCDriver *sdcp, uint8_t cmd, uint32_t arg,
|
|
uint32_t *resp);
|
|
bool_t sdc_lld_send_cmd_long_crc(SDCDriver *sdcp, uint8_t cmd, uint32_t arg,
|
|
uint32_t *resp);
|
|
bool_t sdc_lld_read(SDCDriver *sdcp, uint32_t startblk,
|
|
uint8_t *buf, uint32_t n);
|
|
bool_t sdc_lld_write(SDCDriver *sdcp, uint32_t startblk,
|
|
const uint8_t *buf, uint32_t n);
|
|
bool_t sdc_lld_sync(SDCDriver *sdcp);
|
|
bool_t sdc_lld_is_card_inserted(SDCDriver *sdcp);
|
|
bool_t sdc_lld_is_write_protected(SDCDriver *sdcp);
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif /* HAL_USE_SDC */
|
|
|
|
#endif /* _SDC_LLD_H_ */
|
|
|
|
/** @} */
|