zcy
/
tinySA
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
tinySA/os/hal/ports/LPC/LPC214x/serial_lld.c

344 lines
8.7 KiB
C
Raw Blame History

/*
ChibiOS - Copyright (C) 2006-2014 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
/**
* @file LPC214x/serial_lld.c
* @brief LPC214x low level serial driver code.
*
* @addtogroup SERIAL
* @{
*/
#include "hal.h"
#if HAL_USE_SERIAL || defined(__DOXYGEN__)
/*===========================================================================*/
/* Driver exported variables. */
/*===========================================================================*/
#if USE_LPC214x_UART0 || defined(__DOXYGEN__)
/** @brief UART0 serial driver identifier.*/
SerialDriver SD1;
#endif
#if USE_LPC214x_UART1 || defined(__DOXYGEN__)
/** @brief UART1 serial driver identifier.*/
SerialDriver SD2;
#endif
/*===========================================================================*/
/* Driver local variables and types. */
/*===========================================================================*/
/** @brief Driver default configuration.*/
static const SerialConfig default_config = {
SERIAL_DEFAULT_BITRATE,
LCR_WL8 | LCR_STOP1 | LCR_NOPARITY,
FCR_TRIGGER0
};
/*===========================================================================*/
/* Driver local functions. */
/*===========================================================================*/
/**
* @brief UART initialization.
*
* @param[in] sdp communication channel associated to the UART
* @param[in] config the architecture-dependent serial driver configuration
*/
static void uart_init(SerialDriver *sdp, const SerialConfig *config) {
UART *u = sdp->uart;
uint32_t div = PCLK / (config->sc_speed << 4);
u->UART_LCR = config->sc_lcr | LCR_DLAB;
u->UART_DLL = div;
u->UART_DLM = div >> 8;
u->UART_LCR = config->sc_lcr;
u->UART_FCR = FCR_ENABLE | FCR_RXRESET | FCR_TXRESET | config->sc_fcr;
u->UART_ACR = 0;
u->UART_FDR = 0x10;
u->UART_TER = TER_ENABLE;
u->UART_IER = IER_RBR | IER_STATUS;
}
/**
* @brief UART de-initialization.
*
* @param[in] u pointer to an UART I/O block
*/
static void uart_deinit(UART *u) {
u->UART_LCR = LCR_DLAB;
u->UART_DLL = 1;
u->UART_DLM = 0;
u->UART_LCR = 0;
u->UART_FDR = 0x10;
u->UART_IER = 0;
u->UART_FCR = FCR_RXRESET | FCR_TXRESET;
u->UART_ACR = 0;
u->UART_TER = TER_ENABLE;
}
/**
* @brief Error handling routine.
*
* @param[in] sdp communication channel associated to the UART
* @param[in] err UART LSR register value
*/
static void set_error(SerialDriver *sdp, IOREG32 err) {
eventflags_t sts = 0;
if (err & LSR_OVERRUN)
sts |= SD_OVERRUN_ERROR;
if (err & LSR_PARITY)
sts |= SD_PARITY_ERROR;
if (err & LSR_FRAMING)
sts |= SD_FRAMING_ERROR;
if (err & LSR_BREAK)
sts |= SD_BREAK_DETECTED;
chSysLockFromISR();
chnAddFlagsI(sdp, sts);
chSysUnlockFromISR();
}
/**
* @brief Common IRQ handler.
* @note Tries hard to clear all the pending interrupt sources, we dont want
* to go through the whole ISR and have another interrupt soon after.
*
* @param[in] sdp communication channel associated to the UART
*/
static void serve_interrupt(SerialDriver *sdp) {
UART *u = sdp->uart;
while (TRUE) {
switch (u->UART_IIR & IIR_SRC_MASK) {
case IIR_SRC_NONE:
return;
case IIR_SRC_ERROR:
set_error(sdp, u->UART_LSR);
break;
case IIR_SRC_TIMEOUT:
case IIR_SRC_RX:
chSysLockFromISR();
if (chIQIsEmptyI(&sdp->iqueue))
chnAddFlagsI(sdp, CHN_INPUT_AVAILABLE);
chSysUnlockFromISR();
while (u->UART_LSR & LSR_RBR_FULL) {
chSysLockFromISR();
if (chIQPutI(&sdp->iqueue, u->UART_RBR) < Q_OK)
chnAddFlagsI(sdp, SD_OVERRUN_ERROR);
chSysUnlockFromISR();
}
break;
case IIR_SRC_TX:
{
int i = LPC214x_UART_FIFO_PRELOAD;
do {
msg_t b;
chSysLockFromISR();
b = chOQGetI(&sdp->oqueue);
chSysUnlockFromISR();
if (b < Q_OK) {
u->UART_IER &= ~IER_THRE;
chSysLockFromISR();
chnAddFlagsI(sdp, CHN_OUTPUT_EMPTY);
chSysUnlockFromISR();
break;
}
u->UART_THR = b;
} while (--i);
}
break;
default:
(void) u->UART_THR;
(void) u->UART_RBR;
}
}
}
/**
* @brief Attempts a TX FIFO preload.
*/
static void preload(SerialDriver *sdp) {
UART *u = sdp->uart;
if (u->UART_LSR & LSR_THRE) {
int i = LPC214x_UART_FIFO_PRELOAD;
do {
msg_t b = chOQGetI(&sdp->oqueue);
if (b < Q_OK) {
chnAddFlagsI(sdp, CHN_OUTPUT_EMPTY);
return;
}
u->UART_THR = b;
} while (--i);
}
u->UART_IER |= IER_THRE;
}
/**
* @brief Driver SD1 output notification.
*/
#if USE_LPC214x_UART0 || defined(__DOXYGEN__)
static void notify1(io_queue_t *qp) {
(void)qp;
preload(&SD1);
}
#endif
/**
* @brief Driver SD2 output notification.
*/
#if USE_LPC214x_UART1 || defined(__DOXYGEN__)
static void notify2(io_queue_t *qp) {
(void)qp;
preload(&SD2);
}
#endif
/*===========================================================================*/
/* Driver interrupt handlers. */
/*===========================================================================*/
/**
* @brief UART0 IRQ handler.
*
* @isr
*/
#if USE_LPC214x_UART0 || defined(__DOXYGEN__)
CH_IRQ_HANDLER(UART0IrqHandler) {
CH_IRQ_PROLOGUE();
serve_interrupt(&SD1);
VICVectAddr = 0;
CH_IRQ_EPILOGUE();
}
#endif
/**
* @brief UART1 IRQ handler.
*
* @isr
*/
#if USE_LPC214x_UART1 || defined(__DOXYGEN__)
CH_IRQ_HANDLER(UART1IrqHandler) {
CH_IRQ_PROLOGUE();
serve_interrupt(&SD2);
VICVectAddr = 0;
CH_IRQ_EPILOGUE();
}
#endif
/*===========================================================================*/
/* Driver exported functions. */
/*===========================================================================*/
/**
* @brief Low level serial driver initialization.
*
* @notapi
*/
void sd_lld_init(void) {
#if USE_LPC214x_UART0
sdObjectInit(&SD1, NULL, notify1);
SD1.uart = U0Base;
SetVICVector(UART0IrqHandler, LPC214x_UART0_PRIORITY, SOURCE_UART0);
#endif
#if USE_LPC214x_UART1
sdObjectInit(&SD2, NULL, notify2);
SD2.uart = U1Base;
SetVICVector(UART1IrqHandler, LPC214x_UART1_PRIORITY, SOURCE_UART1);
#endif
}
/**
* @brief Low level serial driver configuration and (re)start.
*
* @param[in] sdp pointer to a @p SerialDriver object
* @param[in] config the architecture-dependent serial driver configuration.
* If this parameter is set to @p NULL then a default
* configuration is used.
*
* @notapi
*/
void sd_lld_start(SerialDriver *sdp, const SerialConfig *config) {
if (config == NULL)
config = &default_config;
if (sdp->state == SD_STOP) {
#if USE_LPC214x_UART0
if (&SD1 == sdp) {
PCONP = (PCONP & PCALL) | PCUART0;
VICIntEnable = INTMASK(SOURCE_UART0);
}
#endif
#if USE_LPC214x_UART1
if (&SD2 == sdp) {
PCONP = (PCONP & PCALL) | PCUART1;
VICIntEnable = INTMASK(SOURCE_UART1);
}
#endif
}
uart_init(sdp, config);
}
/**
* @brief Low level serial driver stop.
* @details De-initializes the UART, stops the associated clock, resets the
* interrupt vector.
*
* @param[in] sdp pointer to a @p SerialDriver object
*
* @notapi
*/
void sd_lld_stop(SerialDriver *sdp) {
if (sdp->state == SD_READY) {
uart_deinit(sdp->uart);
#if USE_LPC214x_UART0
if (&SD1 == sdp) {
PCONP = (PCONP & PCALL) & ~PCUART0;
VICIntEnClear = INTMASK(SOURCE_UART0);
return;
}
#endif
#if USE_LPC214x_UART1
if (&SD2 == sdp) {
PCONP = (PCONP & PCALL) & ~PCUART1;
VICIntEnClear = INTMASK(SOURCE_UART1);
return;
}
#endif
}
}
#endif /* HAL_USE_SERIAL */
/** @} */
Reference in New Issue View Git Blame Copy Permalink