303 lines
10 KiB
C
303 lines
10 KiB
C
/*
|
|
ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
|
|
|
|
Licensed under the Apache License, Version 2.0 (the "License");
|
|
you may not use this file except in compliance with the License.
|
|
You may obtain a copy of the License at
|
|
|
|
http://www.apache.org/licenses/LICENSE-2.0
|
|
|
|
Unless required by applicable law or agreed to in writing, software
|
|
distributed under the License is distributed on an "AS IS" BASIS,
|
|
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
See the License for the specific language governing permissions and
|
|
limitations under the License.
|
|
*/
|
|
|
|
/**
|
|
* @file STM32F1xx/hal_lld.c
|
|
* @brief STM32F1xx HAL subsystem low level driver source.
|
|
*
|
|
* @addtogroup HAL
|
|
* @{
|
|
*/
|
|
|
|
#include "ch.h"
|
|
#include "hal.h"
|
|
|
|
/*===========================================================================*/
|
|
/* Driver local definitions. */
|
|
/*===========================================================================*/
|
|
|
|
/*===========================================================================*/
|
|
/* Driver exported variables. */
|
|
/*===========================================================================*/
|
|
|
|
/*===========================================================================*/
|
|
/* Driver local variables and types. */
|
|
/*===========================================================================*/
|
|
|
|
/*===========================================================================*/
|
|
/* Driver local functions. */
|
|
/*===========================================================================*/
|
|
|
|
/**
|
|
* @brief Initializes the backup domain.
|
|
* @note WARNING! Changing clock source impossible without resetting
|
|
* of the whole BKP domain.
|
|
*/
|
|
static void hal_lld_backup_domain_init(void) {
|
|
|
|
/* Backup domain access enabled and left open.*/
|
|
PWR->CR |= PWR_CR_DBP;
|
|
|
|
#if HAL_USE_RTC
|
|
/* Reset BKP domain if different clock source selected.*/
|
|
if ((RCC->BDCR & STM32_RTCSEL_MASK) != STM32_RTCSEL){
|
|
/* Backup domain reset.*/
|
|
RCC->BDCR = RCC_BDCR_BDRST;
|
|
RCC->BDCR = 0;
|
|
}
|
|
|
|
/* If enabled then the LSE is started.*/
|
|
#if STM32_LSE_ENABLED
|
|
RCC->BDCR |= RCC_BDCR_LSEON;
|
|
while ((RCC->BDCR & RCC_BDCR_LSERDY) == 0)
|
|
; /* Waits until LSE is stable. */
|
|
#endif /* STM32_LSE_ENABLED */
|
|
|
|
#if STM32_RTCSEL != STM32_RTCSEL_NOCLOCK
|
|
/* If the backup domain hasn't been initialized yet then proceed with
|
|
initialization.*/
|
|
if ((RCC->BDCR & RCC_BDCR_RTCEN) == 0) {
|
|
/* Selects clock source.*/
|
|
RCC->BDCR |= STM32_RTCSEL;
|
|
|
|
/* Prescaler value loaded in registers.*/
|
|
rtc_lld_set_prescaler();
|
|
|
|
/* RTC clock enabled.*/
|
|
RCC->BDCR |= RCC_BDCR_RTCEN;
|
|
}
|
|
#endif /* STM32_RTCSEL != STM32_RTCSEL_NOCLOCK */
|
|
#endif /* HAL_USE_RTC */
|
|
}
|
|
|
|
/*===========================================================================*/
|
|
/* Driver interrupt handlers. */
|
|
/*===========================================================================*/
|
|
|
|
/*===========================================================================*/
|
|
/* Driver exported functions. */
|
|
/*===========================================================================*/
|
|
|
|
/**
|
|
* @brief Low level HAL driver initialization.
|
|
*
|
|
* @notapi
|
|
*/
|
|
void hal_lld_init(void) {
|
|
|
|
/* Reset of all peripherals.*/
|
|
rccResetAPB1(0xFFFFFFFF);
|
|
rccResetAPB2(0xFFFFFFFF);
|
|
|
|
/* SysTick initialization using the system clock.*/
|
|
SysTick->LOAD = STM32_HCLK / CH_CFG_FREQUENCY - 1;
|
|
SysTick->VAL = 0;
|
|
SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
|
|
SysTick_CTRL_ENABLE_Msk |
|
|
SysTick_CTRL_TICKINT_Msk;
|
|
|
|
/* DWT cycle counter enable.*/
|
|
SCS_DEMCR |= SCS_DEMCR_TRCENA;
|
|
DWT_CTRL |= DWT_CTRL_CYCCNTENA;
|
|
|
|
/* PWR and BD clocks enabled.*/
|
|
rccEnablePWRInterface(FALSE);
|
|
rccEnableBKPInterface(FALSE);
|
|
|
|
/* Initializes the backup domain.*/
|
|
hal_lld_backup_domain_init();
|
|
|
|
#if defined(STM32_DMA_REQUIRED)
|
|
dmaInit();
|
|
#endif
|
|
|
|
/* Programmable voltage detector enable.*/
|
|
#if STM32_PVD_ENABLE
|
|
PWR->CR |= PWR_CR_PVDE | (STM32_PLS & STM32_PLS_MASK);
|
|
#endif /* STM32_PVD_ENABLE */
|
|
}
|
|
|
|
/**
|
|
* @brief STM32 clocks and PLL initialization.
|
|
* @note All the involved constants come from the file @p board.h.
|
|
* @note This function should be invoked just after the system reset.
|
|
*
|
|
* @special
|
|
*/
|
|
#if defined(STM32F10X_LD) || defined(STM32F10X_LD_VL) || \
|
|
defined(STM32F10X_MD) || defined(STM32F10X_MD_VL) || \
|
|
defined(STM32F10X_HD) || defined(STM32F10X_XL) || \
|
|
defined(__DOXYGEN__)
|
|
/*
|
|
* Clocks initialization for all sub-families except CL.
|
|
*/
|
|
void stm32_clock_init(void) {
|
|
|
|
#if !STM32_NO_INIT
|
|
/* HSI setup, it enforces the reset situation in order to handle possible
|
|
problems with JTAG probes and re-initializations.*/
|
|
RCC->CR |= RCC_CR_HSION; /* Make sure HSI is ON. */
|
|
while (!(RCC->CR & RCC_CR_HSIRDY))
|
|
; /* Wait until HSI is stable. */
|
|
RCC->CR &= RCC_CR_HSITRIM | RCC_CR_HSION; /* CR Reset value. */
|
|
RCC->CFGR = 0; /* CFGR reset value. */
|
|
while ((RCC->CFGR & RCC_CFGR_SWS) != RCC_CFGR_SWS_HSI)
|
|
; /* Waits until HSI is selected. */
|
|
|
|
#if STM32_HSE_ENABLED
|
|
#if defined(STM32_HSE_BYPASS)
|
|
/* HSE Bypass.*/
|
|
RCC->CR |= RCC_CR_HSEBYP;
|
|
#endif
|
|
/* HSE activation.*/
|
|
RCC->CR |= RCC_CR_HSEON;
|
|
while (!(RCC->CR & RCC_CR_HSERDY))
|
|
; /* Waits until HSE is stable. */
|
|
#endif
|
|
|
|
#if STM32_LSI_ENABLED
|
|
/* LSI activation.*/
|
|
RCC->CSR |= RCC_CSR_LSION;
|
|
while ((RCC->CSR & RCC_CSR_LSIRDY) == 0)
|
|
; /* Waits until LSI is stable. */
|
|
#endif
|
|
|
|
#if STM32_ACTIVATE_PLL
|
|
/* PLL activation.*/
|
|
RCC->CFGR |= STM32_PLLMUL | STM32_PLLXTPRE | STM32_PLLSRC;
|
|
RCC->CR |= RCC_CR_PLLON;
|
|
while (!(RCC->CR & RCC_CR_PLLRDY))
|
|
; /* Waits until PLL is stable. */
|
|
#endif
|
|
|
|
/* Clock settings.*/
|
|
#if STM32_HAS_USB
|
|
RCC->CFGR = STM32_MCOSEL | STM32_USBPRE | STM32_PLLMUL | STM32_PLLXTPRE |
|
|
STM32_PLLSRC | STM32_ADCPRE | STM32_PPRE2 | STM32_PPRE1 |
|
|
STM32_HPRE;
|
|
#else
|
|
RCC->CFGR = STM32_MCOSEL | STM32_PLLMUL | STM32_PLLXTPRE |
|
|
STM32_PLLSRC | STM32_ADCPRE | STM32_PPRE2 | STM32_PPRE1 |
|
|
STM32_HPRE;
|
|
#endif
|
|
|
|
/* Flash setup and final clock selection. */
|
|
FLASH->ACR = STM32_FLASHBITS;
|
|
|
|
/* Switching to the configured clock source if it is different from HSI.*/
|
|
#if (STM32_SW != STM32_SW_HSI)
|
|
/* Switches clock source.*/
|
|
RCC->CFGR |= STM32_SW;
|
|
while ((RCC->CFGR & RCC_CFGR_SWS) != (STM32_SW << 2))
|
|
; /* Waits selection complete. */
|
|
#endif
|
|
|
|
#if !STM32_HSI_ENABLED
|
|
RCC->CR &= ~RCC_CR_HSION;
|
|
#endif
|
|
#endif /* !STM32_NO_INIT */
|
|
}
|
|
|
|
#elif defined(STM32F10X_CL)
|
|
/*
|
|
* Clocks initialization for the CL sub-family.
|
|
*/
|
|
void stm32_clock_init(void) {
|
|
|
|
#if !STM32_NO_INIT
|
|
/* HSI setup.*/
|
|
RCC->CR |= RCC_CR_HSION; /* Make sure HSI is ON. */
|
|
while (!(RCC->CR & RCC_CR_HSIRDY))
|
|
; /* Wait until HSI is stable. */
|
|
RCC->CFGR = 0;
|
|
RCC->CR &= RCC_CR_HSITRIM | RCC_CR_HSION; /* CR Reset value. */
|
|
while ((RCC->CFGR & RCC_CFGR_SWS) != RCC_CFGR_SWS_HSI)
|
|
; /* Wait until HSI is the source.*/
|
|
|
|
#if STM32_HSE_ENABLED
|
|
#if defined(STM32_HSE_BYPASS)
|
|
/* HSE Bypass.*/
|
|
RCC->CR |= RCC_CR_HSEBYP;
|
|
#endif
|
|
/* HSE activation.*/
|
|
RCC->CR |= RCC_CR_HSEON;
|
|
while (!(RCC->CR & RCC_CR_HSERDY))
|
|
; /* Waits until HSE is stable. */
|
|
#endif
|
|
|
|
#if STM32_LSI_ENABLED
|
|
/* LSI activation.*/
|
|
RCC->CSR |= RCC_CSR_LSION;
|
|
while ((RCC->CSR & RCC_CSR_LSIRDY) == 0)
|
|
; /* Waits until LSI is stable. */
|
|
#endif
|
|
|
|
/* Settings of various dividers and multipliers in CFGR2.*/
|
|
RCC->CFGR2 = STM32_PLL3MUL | STM32_PLL2MUL | STM32_PREDIV2 |
|
|
STM32_PREDIV1 | STM32_PREDIV1SRC;
|
|
|
|
/* PLL2 setup, if activated.*/
|
|
#if STM32_ACTIVATE_PLL2
|
|
RCC->CR |= RCC_CR_PLL2ON;
|
|
while (!(RCC->CR & RCC_CR_PLL2RDY))
|
|
; /* Waits until PLL2 is stable. */
|
|
#endif
|
|
|
|
/* PLL3 setup, if activated.*/
|
|
#if STM32_ACTIVATE_PLL3
|
|
RCC->CR |= RCC_CR_PLL3ON;
|
|
while (!(RCC->CR & RCC_CR_PLL3RDY))
|
|
; /* Waits until PLL3 is stable. */
|
|
#endif
|
|
|
|
/* PLL1 setup, if activated.*/
|
|
#if STM32_ACTIVATE_PLL1
|
|
RCC->CFGR |= STM32_PLLMUL | STM32_PLLSRC;
|
|
RCC->CR |= RCC_CR_PLLON;
|
|
while (!(RCC->CR & RCC_CR_PLLRDY))
|
|
; /* Waits until PLL1 is stable. */
|
|
#endif
|
|
|
|
/* Clock settings.*/
|
|
#if STM32_HAS_OTG1
|
|
RCC->CFGR = STM32_MCOSEL | STM32_OTGFSPRE | STM32_PLLMUL | STM32_PLLSRC |
|
|
STM32_ADCPRE | STM32_PPRE2 | STM32_PPRE1 | STM32_HPRE;
|
|
#else
|
|
RCC->CFGR = STM32_MCO | STM32_PLLMUL | STM32_PLLSRC |
|
|
STM32_ADCPRE | STM32_PPRE2 | STM32_PPRE1 | STM32_HPRE;
|
|
#endif
|
|
|
|
/* Flash setup and final clock selection. */
|
|
FLASH->ACR = STM32_FLASHBITS; /* Flash wait states depending on clock. */
|
|
|
|
/* Switching to the configured clock source if it is different from HSI.*/
|
|
#if (STM32_SW != STM32_SW_HSI)
|
|
RCC->CFGR |= STM32_SW; /* Switches on the selected clock source. */
|
|
while ((RCC->CFGR & RCC_CFGR_SWS) != (STM32_SW << 2))
|
|
;
|
|
#endif
|
|
|
|
#if !STM32_HSI_ENABLED
|
|
RCC->CR &= ~RCC_CR_HSION;
|
|
#endif
|
|
#endif /* !STM32_NO_INIT */
|
|
}
|
|
#else
|
|
void stm32_clock_init(void) {}
|
|
#endif
|
|
|
|
/** @} */
|