zcy
/
tinySA
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
tinySA/os/hal/ports/STM32/LLD/can_lld.c

709 lines
19 KiB
C
Raw Blame History

/*
ChibiOS/HAL - Copyright (C) 2006-2014 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
/**
* @file STM32/can_lld.c
* @brief STM32 CAN subsystem low level driver source.
*
* @addtogroup CAN
* @{
*/
#include "hal.h"
#if HAL_USE_CAN || defined(__DOXYGEN__)
/*===========================================================================*/
/* Driver local definitions. */
/*===========================================================================*/
/*===========================================================================*/
/* Driver exported variables. */
/*===========================================================================*/
/** @brief CAN1 driver identifier.*/
#if STM32_CAN_USE_CAN1 || defined(__DOXYGEN__)
CANDriver CAND1;
#endif
/** @brief CAN2 driver identifier.*/
#if STM32_CAN_USE_CAN2 || defined(__DOXYGEN__)
CANDriver CAND2;
#endif
/*===========================================================================*/
/* Driver local variables and types. */
/*===========================================================================*/
/*===========================================================================*/
/* Driver local functions. */
/*===========================================================================*/
/**
* @brief Programs the filters.
*
* @param[in] can2sb number of the first filter assigned to CAN2
* @param[in] num number of entries in the filters array, if zero then
* a default filter is programmed
* @param[in] cfp pointer to the filters array, can be @p NULL if
* (num == 0)
*
* @notapi
*/
static void can_lld_set_filters(uint32_t can2sb,
uint32_t num,
const CANFilter *cfp) {
/* Temporarily enabling CAN1 clock.*/
rccEnableCAN1(FALSE);
/* Filters initialization.*/
CAN1->FMR = (CAN1->FMR & 0xFFFF0000) | (can2sb << 8) | CAN_FMR_FINIT;
if (num > 0) {
uint32_t i, fmask;
/* All filters cleared.*/
CAN1->FA1R = 0;
CAN1->FM1R = 0;
CAN1->FS1R = 0;
CAN1->FFA1R = 0;
for (i = 0; i < STM32_CAN_MAX_FILTERS; i++) {
CAN1->sFilterRegister[i].FR1 = 0;
CAN1->sFilterRegister[i].FR2 = 0;
}
/* Scanning the filters array.*/
for (i = 0; i < num; i++) {
fmask = 1 << cfp->filter;
if (cfp->mode)
CAN1->FM1R |= fmask;
if (cfp->scale)
CAN1->FS1R |= fmask;
if (cfp->assignment)
CAN1->FFA1R |= fmask;
CAN1->sFilterRegister[cfp->filter].FR1 = cfp->register1;
CAN1->sFilterRegister[cfp->filter].FR2 = cfp->register2;
CAN1->FA1R |= fmask;
cfp++;
}
}
else {
/* Setting up a single default filter that enables everything for both
CANs.*/
CAN1->sFilterRegister[0].FR1 = 0;
CAN1->sFilterRegister[0].FR2 = 0;
#if STM32_HAS_CAN2
CAN1->sFilterRegister[can2sb].FR1 = 0;
CAN1->sFilterRegister[can2sb].FR2 = 0;
#endif
CAN1->FM1R = 0;
CAN1->FFA1R = 0;
#if STM32_HAS_CAN2
CAN1->FS1R = 1 | (1 << can2sb);
CAN1->FA1R = 1 | (1 << can2sb);
#else
CAN1->FS1R = 1;
CAN1->FA1R = 1;
#endif
}
CAN1->FMR &= ~CAN_FMR_FINIT;
/* Clock disabled, it will be enabled again in can_lld_start().*/
rccDisableCAN1(FALSE);
}
/**
* @brief Common TX ISR handler.
*
* @param[in] canp pointer to the @p CANDriver object
*
* @notapi
*/
static void can_lld_tx_handler(CANDriver *canp) {
/* No more events until a message is transmitted.*/
canp->can->TSR = CAN_TSR_RQCP0 | CAN_TSR_RQCP1 | CAN_TSR_RQCP2;
osalSysLockFromISR();
osalThreadDequeueAllI(&canp->txqueue, MSG_OK);
osalEventBroadcastFlagsI(&canp->txempty_event, CAN_MAILBOX_TO_MASK(1));
osalSysUnlockFromISR();
}
/**
* @brief Common RX0 ISR handler.
*
* @param[in] canp pointer to the @p CANDriver object
*
* @notapi
*/
static void can_lld_rx0_handler(CANDriver *canp) {
uint32_t rf0r;
rf0r = canp->can->RF0R;
if ((rf0r & CAN_RF0R_FMP0) > 0) {
/* No more receive events until the queue 0 has been emptied.*/
canp->can->IER &= ~CAN_IER_FMPIE0;
osalSysLockFromISR();
osalThreadDequeueAllI(&canp->rxqueue, MSG_OK);
osalEventBroadcastFlagsI(&canp->rxfull_event, CAN_MAILBOX_TO_MASK(1));
osalSysUnlockFromISR();
}
if ((rf0r & CAN_RF0R_FOVR0) > 0) {
/* Overflow events handling.*/
canp->can->RF0R = CAN_RF0R_FOVR0;
osalSysLockFromISR();
osalEventBroadcastFlagsI(&canp->error_event, CAN_OVERFLOW_ERROR);
osalSysUnlockFromISR();
}
}
/**
* @brief Common RX1 ISR handler.
*
* @param[in] canp pointer to the @p CANDriver object
*
* @notapi
*/
static void can_lld_rx1_handler(CANDriver *canp) {
uint32_t rf1r;
rf1r = canp->can->RF1R;
if ((rf1r & CAN_RF1R_FMP1) > 0) {
/* No more receive events until the queue 0 has been emptied.*/
canp->can->IER &= ~CAN_IER_FMPIE1;
osalSysLockFromISR();
osalThreadDequeueAllI(&canp->rxqueue, MSG_OK);
osalEventBroadcastFlagsI(&canp->rxfull_event, CAN_MAILBOX_TO_MASK(2));
osalSysUnlockFromISR();
}
if ((rf1r & CAN_RF1R_FOVR1) > 0) {
/* Overflow events handling.*/
canp->can->RF1R = CAN_RF1R_FOVR1;
osalSysLockFromISR();
osalEventBroadcastFlagsI(&canp->error_event, CAN_OVERFLOW_ERROR);
osalSysUnlockFromISR();
}
}
/**
* @brief Common SCE ISR handler.
*
* @param[in] canp pointer to the @p CANDriver object
*
* @notapi
*/
static void can_lld_sce_handler(CANDriver *canp) {
uint32_t msr;
msr = canp->can->MSR;
canp->can->MSR = CAN_MSR_ERRI | CAN_MSR_WKUI | CAN_MSR_SLAKI;
/* Wakeup event.*/
#if CAN_USE_SLEEP_MODE
if (msr & CAN_MSR_WKUI) {
canp->state = CAN_READY;
canp->can->MCR &= ~CAN_MCR_SLEEP;
osalSysLockFromISR();
osalEventBroadcastFlagsI(&canp->wakeup_event, 0);
osalSysUnlockFromISR();
}
#endif /* CAN_USE_SLEEP_MODE */
/* Error event.*/
if (msr & CAN_MSR_ERRI) {
eventflags_t flags;
uint32_t esr = canp->can->ESR;
canp->can->ESR &= ~CAN_ESR_LEC;
flags = (eventflags_t)(esr & 7);
if ((esr & CAN_ESR_LEC) > 0)
flags |= CAN_FRAMING_ERROR;
osalSysLockFromISR();
/* The content of the ESR register is copied unchanged in the upper
half word of the listener flags mask.*/
osalEventBroadcastFlagsI(&canp->error_event, flags | (eventflags_t)(esr << 16));
osalSysUnlockFromISR();
}
}
/*===========================================================================*/
/* Driver interrupt handlers. */
/*===========================================================================*/
#if STM32_CAN_USE_CAN1 || defined(__DOXYGEN__)
/**
* @brief CAN1 TX interrupt handler.
*
* @isr
*/
OSAL_IRQ_HANDLER(STM32_CAN1_TX_HANDLER) {
OSAL_IRQ_PROLOGUE();
can_lld_tx_handler(&CAND1);
OSAL_IRQ_EPILOGUE();
}
/*
* @brief CAN1 RX0 interrupt handler.
*
* @isr
*/
OSAL_IRQ_HANDLER(STM32_CAN1_RX0_HANDLER) {
OSAL_IRQ_PROLOGUE();
can_lld_rx0_handler(&CAND1);
OSAL_IRQ_EPILOGUE();
}
/**
* @brief CAN1 RX1 interrupt handler.
*
* @isr
*/
OSAL_IRQ_HANDLER(STM32_CAN1_RX1_HANDLER) {
OSAL_IRQ_PROLOGUE();
can_lld_rx1_handler(&CAND1);
OSAL_IRQ_EPILOGUE();
}
/**
* @brief CAN1 SCE interrupt handler.
*
* @isr
*/
OSAL_IRQ_HANDLER(STM32_CAN1_SCE_HANDLER) {
OSAL_IRQ_PROLOGUE();
can_lld_sce_handler(&CAND1);
OSAL_IRQ_EPILOGUE();
}
#endif /* STM32_CAN_USE_CAN1 */
#if STM32_CAN_USE_CAN2 || defined(__DOXYGEN__)
/**
* @brief CAN2 TX interrupt handler.
*
* @isr
*/
OSAL_IRQ_HANDLER(STM32_CAN2_TX_HANDLER) {
OSAL_IRQ_PROLOGUE();
can_lld_tx_handler(&CAND2);
OSAL_IRQ_EPILOGUE();
}
/*
* @brief CAN2 RX0 interrupt handler.
*
* @isr
*/
OSAL_IRQ_HANDLER(STM32_CAN2_RX0_HANDLER) {
OSAL_IRQ_PROLOGUE();
can_lld_rx0_handler(&CAND2);
OSAL_IRQ_EPILOGUE();
}
/**
* @brief CAN2 RX1 interrupt handler.
*
* @isr
*/
OSAL_IRQ_HANDLER(STM32_CAN2_RX1_HANDLER) {
OSAL_IRQ_PROLOGUE();
can_lld_rx1_handler(&CAND2);
OSAL_IRQ_EPILOGUE();
}
/**
* @brief CAN2 SCE interrupt handler.
*
* @isr
*/
OSAL_IRQ_HANDLER(STM32_CAN2_SCE_HANDLER) {
OSAL_IRQ_PROLOGUE();
can_lld_sce_handler(&CAND2);
OSAL_IRQ_EPILOGUE();
}
#endif /* STM32_CAN_USE_CAN2 */
/*===========================================================================*/
/* Driver exported functions. */
/*===========================================================================*/
/**
* @brief Low level CAN driver initialization.
*
* @notapi
*/
void can_lld_init(void) {
#if STM32_CAN_USE_CAN1
/* Driver initialization.*/
canObjectInit(&CAND1);
CAND1.can = CAN1;
#endif
#if STM32_CAN_USE_CAN2
/* Driver initialization.*/
canObjectInit(&CAND2);
CAND2.can = CAN2;
#endif
/* Filters initialization.*/
#if STM32_HAS_CAN2
can_lld_set_filters(STM32_CAN_MAX_FILTERS / 2, 0, NULL);
#else
can_lld_set_filters(STM32_CAN_MAX_FILTERS, 0, NULL);
#endif
}
/**
* @brief Configures and activates the CAN peripheral.
*
* @param[in] canp pointer to the @p CANDriver object
*
* @notapi
*/
void can_lld_start(CANDriver *canp) {
/* Clock activation.*/
#if STM32_CAN_USE_CAN1
if (&CAND1 == canp) {
nvicEnableVector(STM32_CAN1_TX_NUMBER, STM32_CAN_CAN1_IRQ_PRIORITY);
nvicEnableVector(STM32_CAN1_RX0_NUMBER, STM32_CAN_CAN1_IRQ_PRIORITY);
nvicEnableVector(STM32_CAN1_RX1_NUMBER, STM32_CAN_CAN1_IRQ_PRIORITY);
nvicEnableVector(STM32_CAN1_SCE_NUMBER, STM32_CAN_CAN1_IRQ_PRIORITY);
rccEnableCAN1(FALSE);
}
#endif
#if STM32_CAN_USE_CAN2
if (&CAND2 == canp) {
osalDbgAssert(CAND1.state != CAN_STOP, "CAN1 must be started");
nvicEnableVector(STM32_CAN2_TX_NUMBER, STM32_CAN_CAN2_IRQ_PRIORITY);
nvicEnableVector(STM32_CAN2_RX0_NUMBER, STM32_CAN_CAN2_IRQ_PRIORITY);
nvicEnableVector(STM32_CAN2_RX1_NUMBER, STM32_CAN_CAN2_IRQ_PRIORITY);
nvicEnableVector(STM32_CAN2_SCE_NUMBER, STM32_CAN_CAN2_IRQ_PRIORITY);
rccEnableCAN2(FALSE);
}
#endif
/* Entering initialization mode. */
canp->state = CAN_STARTING;
canp->can->MCR = CAN_MCR_INRQ;
while ((canp->can->MSR & CAN_MSR_INAK) == 0)
osalThreadSleepS(1);
/* BTR initialization.*/
canp->can->BTR = canp->config->btr;
/* MCR initialization.*/
canp->can->MCR = canp->config->mcr;
/* Interrupt sources initialization.*/
canp->can->IER = CAN_IER_TMEIE | CAN_IER_FMPIE0 | CAN_IER_FMPIE1 |
CAN_IER_WKUIE | CAN_IER_ERRIE | CAN_IER_LECIE |
CAN_IER_BOFIE | CAN_IER_EPVIE | CAN_IER_EWGIE |
CAN_IER_FOVIE0 | CAN_IER_FOVIE1;
}
/**
* @brief Deactivates the CAN peripheral.
*
* @param[in] canp pointer to the @p CANDriver object
*
* @notapi
*/
void can_lld_stop(CANDriver *canp) {
/* If in ready state then disables the CAN peripheral.*/
if (canp->state == CAN_READY) {
#if STM32_CAN_USE_CAN1
if (&CAND1 == canp) {
#if STM32_CAN_USE_CAN2
osalDbgAssert(CAND2.state == CAN_STOP, "CAN2 must be stopped");
#endif
CAN1->MCR = 0x00010002; /* Register reset value. */
CAN1->IER = 0x00000000; /* All sources disabled. */
nvicDisableVector(STM32_CAN1_TX_NUMBER);
nvicDisableVector(STM32_CAN1_RX0_NUMBER);
nvicDisableVector(STM32_CAN1_RX1_NUMBER);
nvicDisableVector(STM32_CAN1_SCE_NUMBER);
rccDisableCAN1(FALSE);
}
#endif
#if STM32_CAN_USE_CAN2
if (&CAND2 == canp) {
CAN2->MCR = 0x00010002; /* Register reset value. */
CAN2->IER = 0x00000000; /* All sources disabled. */
nvicDisableVector(STM32_CAN2_TX_NUMBER);
nvicDisableVector(STM32_CAN2_RX0_NUMBER);
nvicDisableVector(STM32_CAN2_RX1_NUMBER);
nvicDisableVector(STM32_CAN2_SCE_NUMBER);
rccDisableCAN2(FALSE);
}
#endif
}
}
/**
* @brief Determines whether a frame can be transmitted.
*
* @param[in] canp pointer to the @p CANDriver object
* @param[in] mailbox mailbox number, @p CAN_ANY_MAILBOX for any mailbox
*
* @return The queue space availability.
* @retval FALSE no space in the transmit queue.
* @retval TRUE transmit slot available.
*
* @notapi
*/
bool can_lld_is_tx_empty(CANDriver *canp, canmbx_t mailbox) {
switch (mailbox) {
case CAN_ANY_MAILBOX:
return (canp->can->TSR & CAN_TSR_TME) != 0;
case 1:
return (canp->can->TSR & CAN_TSR_TME0) != 0;
case 2:
return (canp->can->TSR & CAN_TSR_TME1) != 0;
case 3:
return (canp->can->TSR & CAN_TSR_TME2) != 0;
default:
return FALSE;
}
}
/**
* @brief Inserts a frame into the transmit queue.
*
* @param[in] canp pointer to the @p CANDriver object
* @param[in] ctfp pointer to the CAN frame to be transmitted
* @param[in] mailbox mailbox number, @p CAN_ANY_MAILBOX for any mailbox
*
* @notapi
*/
void can_lld_transmit(CANDriver *canp,
canmbx_t mailbox,
const CANTxFrame *ctfp) {
uint32_t tir;
CAN_TxMailBox_TypeDef *tmbp;
/* Pointer to a free transmission mailbox.*/
switch (mailbox) {
case CAN_ANY_MAILBOX:
tmbp = &canp->can->sTxMailBox[(canp->can->TSR & CAN_TSR_CODE) >> 24];
break;
case 1:
tmbp = &canp->can->sTxMailBox[0];
break;
case 2:
tmbp = &canp->can->sTxMailBox[1];
break;
case 3:
tmbp = &canp->can->sTxMailBox[2];
break;
default:
return;
}
/* Preparing the message.*/
if (ctfp->IDE)
tir = ((uint32_t)ctfp->EID << 3) | ((uint32_t)ctfp->RTR << 1) |
CAN_TI0R_IDE;
else
tir = ((uint32_t)ctfp->SID << 21) | ((uint32_t)ctfp->RTR << 1);
tmbp->TDTR = ctfp->DLC;
tmbp->TDLR = ctfp->data32[0];
tmbp->TDHR = ctfp->data32[1];
tmbp->TIR = tir | CAN_TI0R_TXRQ;
}
/**
* @brief Determines whether a frame has been received.
*
* @param[in] canp pointer to the @p CANDriver object
* @param[in] mailbox mailbox number, @p CAN_ANY_MAILBOX for any mailbox
*
* @return The queue space availability.
* @retval FALSE no space in the transmit queue.
* @retval TRUE transmit slot available.
*
* @notapi
*/
bool can_lld_is_rx_nonempty(CANDriver *canp, canmbx_t mailbox) {
switch (mailbox) {
case CAN_ANY_MAILBOX:
return ((canp->can->RF0R & CAN_RF0R_FMP0) != 0 ||
(canp->can->RF1R & CAN_RF1R_FMP1) != 0);
case 1:
return (canp->can->RF0R & CAN_RF0R_FMP0) != 0;
case 2:
return (canp->can->RF1R & CAN_RF1R_FMP1) != 0;
default:
return FALSE;
}
}
/**
* @brief Receives a frame from the input queue.
*
* @param[in] canp pointer to the @p CANDriver object
* @param[in] mailbox mailbox number, @p CAN_ANY_MAILBOX for any mailbox
* @param[out] crfp pointer to the buffer where the CAN frame is copied
*
* @notapi
*/
void can_lld_receive(CANDriver *canp,
canmbx_t mailbox,
CANRxFrame *crfp) {
uint32_t rir, rdtr;
if (mailbox == CAN_ANY_MAILBOX) {
if ((canp->can->RF0R & CAN_RF0R_FMP0) != 0)
mailbox = 1;
else if ((canp->can->RF1R & CAN_RF1R_FMP1) != 0)
mailbox = 2;
else {
/* Should not happen, do nothing.*/
return;
}
}
switch (mailbox) {
case 1:
/* Fetches the message.*/
rir = canp->can->sFIFOMailBox[0].RIR;
rdtr = canp->can->sFIFOMailBox[0].RDTR;
crfp->data32[0] = canp->can->sFIFOMailBox[0].RDLR;
crfp->data32[1] = canp->can->sFIFOMailBox[0].RDHR;
/* Releases the mailbox.*/
canp->can->RF0R = CAN_RF0R_RFOM0;
/* If the queue is empty re-enables the interrupt in order to generate
events again.*/
if ((canp->can->RF0R & CAN_RF0R_FMP0) == 0)
canp->can->IER |= CAN_IER_FMPIE0;
break;
case 2:
/* Fetches the message.*/
rir = canp->can->sFIFOMailBox[1].RIR;
rdtr = canp->can->sFIFOMailBox[1].RDTR;
crfp->data32[0] = canp->can->sFIFOMailBox[1].RDLR;
crfp->data32[1] = canp->can->sFIFOMailBox[1].RDHR;
/* Releases the mailbox.*/
canp->can->RF1R = CAN_RF1R_RFOM1;
/* If the queue is empty re-enables the interrupt in order to generate
events again.*/
if ((canp->can->RF1R & CAN_RF1R_FMP1) == 0)
canp->can->IER |= CAN_IER_FMPIE1;
break;
default:
/* Should not happen, do nothing.*/
return;
}
/* Decodes the various fields in the RX frame.*/
crfp->RTR = (rir & CAN_RI0R_RTR) >> 1;
crfp->IDE = (rir & CAN_RI0R_IDE) >> 2;
if (crfp->IDE)
crfp->EID = rir >> 3;
else
crfp->SID = rir >> 21;
crfp->DLC = rdtr & CAN_RDT0R_DLC;
crfp->FMI = (uint8_t)(rdtr >> 8);
crfp->TIME = (uint16_t)(rdtr >> 16);
}
#if CAN_USE_SLEEP_MODE || defined(__DOXYGEN__)
/**
* @brief Enters the sleep mode.
*
* @param[in] canp pointer to the @p CANDriver object
*
* @notapi
*/
void can_lld_sleep(CANDriver *canp) {
canp->can->MCR |= CAN_MCR_SLEEP;
}
/**
* @brief Enforces leaving the sleep mode.
*
* @param[in] canp pointer to the @p CANDriver object
*
* @notapi
*/
void can_lld_wakeup(CANDriver *canp) {
canp->can->MCR &= ~CAN_MCR_SLEEP;
}
#endif /* CAN_USE_SLEEP_MODE */
/**
* @brief Programs the filters.
* @note This is an STM32-specific API.
*
* @param[in] can2sb number of the first filter assigned to CAN2
* @param[in] num number of entries in the filters array, if zero then
* a default filter is programmed
* @param[in] cfp pointer to the filters array, can be @p NULL if
* (num == 0)
*
* @api
*/
void canSTM32SetFilters(uint32_t can2sb, uint32_t num, const CANFilter *cfp) {
osalDbgCheck((can2sb >= 1) && (can2sb < STM32_CAN_MAX_FILTERS) &&
(num <= STM32_CAN_MAX_FILTERS));
#if STM32_CAN_USE_CAN1
osalDbgAssert(CAND1.state == CAN_STOP, "invalid state");
#endif
#if STM32_CAN_USE_CAN2
osalDbgAssert(CAND2.state == CAN_STOP, "invalid state");
#endif
can_lld_set_filters(can2sb, num, cfp);
}
#endif /* HAL_USE_CAN */
/** @} */
Reference in New Issue View Git Blame Copy Permalink