201 lines
7.9 KiB
C
201 lines
7.9 KiB
C
/*
|
|
ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010 Giovanni Di Sirio.
|
|
|
|
This file is part of ChibiOS/RT.
|
|
|
|
ChibiOS/RT is free software; you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation; either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
ChibiOS/RT is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
/**
|
|
* @file STM32/hal_lld.c
|
|
* @brief STM32 HAL subsystem low level driver source.
|
|
*
|
|
* @addtogroup HAL
|
|
* @{
|
|
*/
|
|
|
|
#include "ch.h"
|
|
#include "hal.h"
|
|
|
|
#define AIRCR_VECTKEY 0x05FA0000
|
|
|
|
/*===========================================================================*/
|
|
/* Driver exported variables. */
|
|
/*===========================================================================*/
|
|
|
|
/*===========================================================================*/
|
|
/* Driver local variables. */
|
|
/*===========================================================================*/
|
|
|
|
/*===========================================================================*/
|
|
/* Driver local functions. */
|
|
/*===========================================================================*/
|
|
|
|
/*===========================================================================*/
|
|
/* Driver interrupt handlers. */
|
|
/*===========================================================================*/
|
|
|
|
/*===========================================================================*/
|
|
/* Driver exported functions. */
|
|
/*===========================================================================*/
|
|
|
|
/**
|
|
* @brief Low level HAL driver initialization.
|
|
*
|
|
* @notapi
|
|
*/
|
|
void hal_lld_init(void) {
|
|
|
|
/* SysTick initialization using the system clock.*/
|
|
SysTick->LOAD = STM32_HCLK / CH_FREQUENCY - 1;
|
|
SysTick->VAL = 0;
|
|
SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk |
|
|
SysTick_CTRL_ENABLE_Msk |
|
|
SysTick_CTRL_TICKINT_Msk;
|
|
|
|
#if HAL_USE_ADC || HAL_USE_SPI || HAL_USE_UART
|
|
dmaInit();
|
|
#endif
|
|
}
|
|
|
|
/**
|
|
* @brief STM32 clocks and PLL initialization.
|
|
* @note All the involved constants come from the file @p board.h.
|
|
* @note This function must be invoked only after the system reset.
|
|
*
|
|
* @special
|
|
*/
|
|
#if defined(STM32F10X_LD) || defined(STM32F10X_MD) || \
|
|
defined(STM32F10X_HD) || defined(STM32F10X_LD_VL) || \
|
|
defined(STM32F10X_MD_VL) || defined(__DOXYGEN__)
|
|
/*
|
|
* Clocks initialization for the LD, MD and HD sub-families.
|
|
*/
|
|
void stm32_clock_init(void) {
|
|
|
|
/* HSI setup, it enforces the reset situation in order to handle possible
|
|
problems with JTAG probes and re-initializations.*/
|
|
RCC->CR |= RCC_CR_HSION; /* Make sure HSI is ON. */
|
|
while (!(RCC->CR & RCC_CR_HSIRDY))
|
|
; /* Wait until HSI is stable. */
|
|
RCC->CR &= RCC_CR_HSITRIM | RCC_CR_HSION; /* CR Reset value. */
|
|
RCC->CFGR = 0; /* CFGR reset value. */
|
|
while ((RCC->CFGR & RCC_CFGR_SWS) != RCC_CFGR_SWS_HSI)
|
|
; /* Wait until HSI is the source.*/
|
|
|
|
/* HSE setup, it is only performed if the HSE clock is selected as source
|
|
of the system clock (directly or through the PLL).*/
|
|
#if (STM32_SW == STM32_SW_HSE) || \
|
|
((STM32_SW == STM32_SW_PLL) && (STM32_PLLSRC == STM32_PLLSRC_HSE))
|
|
RCC->CR |= RCC_CR_HSEON;
|
|
while (!(RCC->CR & RCC_CR_HSERDY))
|
|
; /* Waits until HSE is stable. */
|
|
#endif
|
|
|
|
/* PLL setup, it is only performed if the PLL is the selected source of
|
|
the system clock else it is left disabled.*/
|
|
#if STM32_SW == STM32_SW_PLL
|
|
RCC->CFGR |= STM32_PLLMUL | STM32_PLLXTPRE | STM32_PLLSRC;
|
|
RCC->CR |= RCC_CR_PLLON;
|
|
while (!(RCC->CR & RCC_CR_PLLRDY))
|
|
; /* Waits until PLL is stable. */
|
|
#endif
|
|
|
|
/* Clock settings.*/
|
|
#if STM32_HAS_USB
|
|
RCC->CFGR = STM32_MCO | STM32_USBPRE | STM32_PLLMUL | STM32_PLLXTPRE |
|
|
STM32_PLLSRC | STM32_ADCPRE | STM32_PPRE2 | STM32_PPRE1 |
|
|
STM32_HPRE;
|
|
#else
|
|
RCC->CFGR = STM32_MCO | STM32_PLLMUL | STM32_PLLXTPRE |
|
|
STM32_PLLSRC | STM32_ADCPRE | STM32_PPRE2 | STM32_PPRE1 |
|
|
STM32_HPRE;
|
|
#endif
|
|
|
|
/* Flash setup and final clock selection. */
|
|
FLASH->ACR = STM32_FLASHBITS; /* Flash wait states depending on clock. */
|
|
|
|
/* Switching on the configured clock source if it is different from HSI.*/
|
|
#if (STM32_SW != STM32_SW_HSI)
|
|
RCC->CFGR |= STM32_SW; /* Switches on the selected clock source. */
|
|
while ((RCC->CFGR & RCC_CFGR_SWS) != (STM32_SW << 2))
|
|
;
|
|
#endif
|
|
}
|
|
|
|
#elif defined(STM32F10X_CL)
|
|
/*
|
|
* Clocks initialization for the CL sub-family.
|
|
*/
|
|
void stm32_clock_init(void) {
|
|
|
|
/* HSI setup, it enforces the reset situation in order to handle possible
|
|
problems with JTAG probes and re-initializations.*/
|
|
RCC->CR |= RCC_CR_HSION; /* Make sure HSI is ON. */
|
|
while (!(RCC->CR & RCC_CR_HSIRDY))
|
|
; /* Wait until HSI is stable. */
|
|
RCC->CR &= RCC_CR_HSITRIM | RCC_CR_HSION; /* CR Reset value. */
|
|
RCC->CFGR = 0; /* CFGR reset value. */
|
|
while ((RCC->CFGR & RCC_CFGR_SWS) != RCC_CFGR_SWS_HSI)
|
|
; /* Wait until HSI is the source.*/
|
|
RCC->CFGR2 = 0;
|
|
|
|
/* HSE setup, it is only performed if the HSE clock is selected as source
|
|
of the system clock (directly or through the PLLs).*/
|
|
#if (STM32_SW == STM32_SW_HSE) || \
|
|
((STM32_SW == STM32_SW_PLL) && (STM32_PLLSRC == STM32_PLLSRC_PREDIV1))
|
|
RCC->CR |= RCC_CR_HSEON;
|
|
while (!(RCC->CR & RCC_CR_HSERDY))
|
|
; /* Waits until HSE is stable. */
|
|
#endif
|
|
|
|
/* PLL2 setup, it is only performed if the PLL2 clock is selected as source
|
|
for the PLL clock else it is left disabled.*/
|
|
#if STM32_SW == STM32_SW_PLL
|
|
#if STM32_PREDIV1SRC == STM32_PREDIV1SRC_PLL2
|
|
RCC->CFGR2 |= STM32_PREDIV2 | STM32_PLL2MUL;
|
|
RCC->CR |= RCC_CR_PLL2ON;
|
|
while (!(RCC->CR & RCC_CR_PLL2RDY))
|
|
; /* Waits until PLL is stable. */
|
|
#endif
|
|
|
|
/* PLL setup, it is only performed if the PLL is the selected source of
|
|
the system clock else it is left disabled.*/
|
|
RCC->CFGR2 |= STM32_PREDIV1 | STM32_PREDIV1SRC;
|
|
RCC->CFGR |= STM32_PLLMUL | STM32_PLLSRC;
|
|
RCC->CR |= RCC_CR_PLLON;
|
|
while (!(RCC->CR & RCC_CR_PLLRDY))
|
|
; /* Waits until PLL2 is stable. */
|
|
#endif
|
|
|
|
/* Clock settings.*/
|
|
RCC->CFGR = STM32_MCO | STM32_PLLMUL | STM32_PLLSRC |
|
|
STM32_ADCPRE | STM32_PPRE2 | STM32_PPRE1 | STM32_HPRE;
|
|
|
|
/* Flash setup and final clock selection. */
|
|
FLASH->ACR = STM32_FLASHBITS; /* Flash wait states depending on clock. */
|
|
|
|
/* Switching on the configured clock source if it is different from HSI.*/
|
|
#if (STM32_SW != STM32_SW_HSI)
|
|
RCC->CFGR |= STM32_SW; /* Switches on the selected clock source. */
|
|
while ((RCC->CFGR & RCC_CFGR_SWS) != (STM32_SW << 2))
|
|
;
|
|
#endif
|
|
}
|
|
#else
|
|
void stm32_clock_init(void) {}
|
|
#endif
|
|
|
|
/** @} */
|