zcy
/
tinySA
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
tinySA/os/hal/platforms/STM32/RTCv1/rtc_lld.c

296 lines
8.6 KiB
C
Raw Blame History

/*
ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
2011 Giovanni Di Sirio.
This file is part of ChibiOS/RT.
ChibiOS/RT is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
ChibiOS/RT is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
/*
Concepts and parts of this file have been contributed by Uladzimir Pylinsky
aka barthess.
*/
/**
* @file STM32/RTCv1/rtc_lld.c
* @brief STM32 RTC subsystem low level driver header.
*
* @addtogroup RTC
* @{
*/
#include "ch.h"
#include "hal.h"
#if HAL_USE_RTC || defined(__DOXYGEN__)
/*===========================================================================*/
/* Driver exported variables. */
/*===========================================================================*/
/**
* @brief RTC driver identifier.
*/
RTCDriver RTCD1;
/*===========================================================================*/
/* Driver local variables. */
/*===========================================================================*/
/*===========================================================================*/
/* Driver local functions. */
/*===========================================================================*/
/**
* @brief Wait for synchronization of RTC registers with APB1 bus.
* @details This function must be invoked before trying to read RTC registers
* in the backup domain: DIV, CNT, ALR. CR registers can always
* be read.
*
* @notapi
*/
#define rtc_lld_apb1_sync() {while ((RTC->CRL & RTC_CRL_RSF) == 0);}
/**
* @brief Wait for for previous write operation complete.
* @details This function must be invoked before writing to any RTC registers
*
* @notapi
*/
#define rtc_lld_wait_write() {while ((RTC->CRL & RTC_CRL_RTOFF) == 0);}
/**
* @brief Acquires write access to RTC registers.
* @details Before writing to the backup domain RTC registers the previous
* write operation must be completed. Use this function before
* writing to PRL, CNT, ALR registers.
*
* @notapi
*/
#define rtc_lld_acquire() {rtc_lld_wait_write(); RTC->CRL |= RTC_CRL_CNF;}
/**
* @brief Releases write access to RTC registers.
*
* @notapi
*/
#define rtc_lld_release() {RTC->CRL &= ~RTC_CRL_CNF;}
/*===========================================================================*/
/* Driver interrupt handlers. */
/*===========================================================================*/
/**
* @brief RTC interrupt handler.
*
* @isr
*/
CH_IRQ_HANDLER(RTC_IRQHandler) {
uint16_t flags;
CH_IRQ_PROLOGUE();
/* This wait works only when AHB1 bus was previously powered off by any
reason (standby, reset, etc). In other cases it does nothing.*/
rtc_lld_apb1_sync();
/* Mask of all enabled and pending sources.*/
flags = RTC->CRH & RTC->CRL;
RTC->CRL &= ~(RTC_CRL_SECF | RTC_CRL_ALRF | RTC_CRL_OWF);
if (flags & RTC_CRL_SECF)
RTCD1.callback(&RTCD1, RTC_EVENT_SECOND);
if (flags & RTC_CRL_ALRF)
RTCD1.callback(&RTCD1, RTC_EVENT_ALARM);
if (flags & RTC_CRL_OWF)
RTCD1.callback(&RTCD1, RTC_EVENT_OVERFLOW);
CH_IRQ_EPILOGUE();
}
/*===========================================================================*/
/* Driver exported functions. */
/*===========================================================================*/
/**
* @brief Enable access to registers and initialize RTC if BKP domain
* was previously reseted.
* @note: Cold start time of LSE oscillator on STM32 platform
* takes about 3 seconds.
*
* @notapi
*/
void rtc_lld_init(void){
/* Required because access to PRL.*/
rtc_lld_apb1_sync();
/* Writes preload register only if its value is not equal to desired value.*/
if (STM32_RTCCLK != (((uint32_t)(RTC->PRLH)) << 16) +
((uint32_t)RTC->PRLL) + 1) {
rtc_lld_acquire();
RTC->PRLH = (uint16_t)((STM32_RTCCLK - 1) >> 16);
RTC->PRLL = (uint16_t)((STM32_RTCCLK - 1) & 0xFFFF);
rtc_lld_release();
}
/* All interrupts initially disabled.*/
rtc_lld_wait_write();
RTC->CRH = 0;
/* Callback initially disabled.*/
RTCD1.callback = NULL;
/* IRQ vector permanently assigned to this driver.*/
nvicEnableVector(RTC_IRQn, CORTEX_PRIORITY_MASK(STM32_RTC_IRQ_PRIORITY));
}
/**
* @brief Set current time.
* @note Fractional part will be silently ignored. There is no possibility
* to change it on STM32F1xx platform.
*
* @param[in] rtcp pointer to RTC driver structure
* @param[in] timespec pointer to a @p RTCTime structure
*
* @notapi
*/
void rtc_lld_set_time(RTCDriver *rtcp, const RTCTime *timespec) {
(void)rtcp;
rtc_lld_acquire();
RTC->CNTH = (uint16_t)(timespec->tv_sec >> 16);
RTC->CNTL = (uint16_t)(timespec->tv_sec & 0xFFFF);
rtc_lld_release();
}
/**
* @brief Get current time.
*
* @param[in] rtcp pointer to RTC driver structure
* @param[in] timespec pointer to a @p RTCTime structure
*
* @notapi
*/
void rtc_lld_get_time(RTCDriver *rtcp, RTCTime *timespec) {
(void)rtcp;
uint32_t time_frac;
/* Required because access to CNT and DIV.*/
rtc_lld_apb1_sync();
/* Loops until two consecutive read returning the same value.*/
do {
timespec->tv_sec = ((uint32_t)(RTC->CNTH) << 16) + RTC->CNTL;
time_frac = (((uint32_t)RTC->DIVH) << 16) + (uint32_t)RTC->DIVL;
} while ((timespec->tv_sec) != (((uint32_t)(RTC->CNTH) << 16) + RTC->CNTL));
timespec->tv_msec = (uint16_t)(((STM32_RTCCLK - 1 - time_frac) * 1000) /
STM32_RTCCLK);
}
/**
* @brief Set alarm time.
*
* @note Default value after BKP domain reset is 0xFFFFFFFF
*
* @param[in] rtcp pointer to RTC driver structure
* @param[in] alarm alarm identifier
* @param[in] alarmspec pointer to a @p RTCAlarm structure
*
* @notapi
*/
void rtc_lld_set_alarm(RTCDriver *rtcp,
rtcalarm_t alarm,
const RTCAlarm *alarmspec) {
(void)rtcp;
(void)alarm;
rtc_lld_acquire();
if (alarmspec != NULL) {
RTC->ALRH = (uint16_t)(alarmspec->tv_sec >> 16);
RTC->ALRL = (uint16_t)(alarmspec->tv_sec & 0xFFFF);
}
else {
RTC->ALRH = 0;
RTC->ALRL = 0;
}
rtc_lld_release();
}
/**
* @brief Get current alarm.
* @note If an alarm has not been set then the returned alarm specification
* is not meaningful.
*
* @note Default value after BKP domain reset is 0xFFFFFFFF.
*
* @param[in] rtcp pointer to RTC driver structure
* @param[in] alarm alarm identifier
* @param[out] alarmspec pointer to a @p RTCAlarm structure
*
* @notapi
*/
void rtc_lld_get_alarm(RTCDriver *rtcp,
rtcalarm_t alarm,
RTCAlarm *alarmspec) {
(void)rtcp;
(void)alarm;
/* Required because access to ALR.*/
rtc_lld_apb1_sync();
alarmspec->tv_sec = ((RTC->ALRH << 16) + RTC->ALRL);
}
/**
* @brief Enables or disables RTC callbacks.
* @details This function enables or disables callbacks, use a @p NULL pointer
* in order to disable a callback.
*
* @param[in] rtcp pointer to RTC driver structure
* @param[in] callback callback function pointer or @p NULL
*
* @notapi
*/
void rtc_lld_set_callback(RTCDriver *rtcp, rtccb_t callback) {
if (callback != NULL) {
/* IRQ sources enabled only after setting up the callback.*/
rtcp->callback = callback;
rtc_lld_wait_write();
RTC->CRL &= ~(RTC_CRL_OWF | RTC_CRL_ALRF | RTC_CRL_SECF);
RTC->CRH = RTC_CRH_OWIE | RTC_CRH_ALRIE | RTC_CRH_SECIE;
}
else {
rtc_lld_wait_write();
RTC->CRH = 0;
/* Callback set to NULL only after disabling the IRQ sources.*/
rtcp->callback = NULL;
}
}
#endif /* HAL_USE_RTC */
/** @} */
Reference in New Issue View Git Blame Copy Permalink