tinySA/os/hal/platforms/AT91SAM7/at91sam7_mii.c

148 lines
4.9 KiB
C

/*
ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010 Giovanni Di Sirio.
This file is part of ChibiOS/RT.
ChibiOS/RT is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
ChibiOS/RT is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
/**
* @file AT91SAM7/at91sam7_mii.c
* @brief AT91SAM7 low level MII driver code.
*
* @addtogroup AT91SAM7_MII
* @{
*/
#include "ch.h"
#include "hal.h"
#include "at91sam7_mii.h"
#if CH_HAL_USE_MAC || defined(__DOXYGEN__)
/*===========================================================================*/
/* Driver exported variables. */
/*===========================================================================*/
/*===========================================================================*/
/* Driver local variables. */
/*===========================================================================*/
/*===========================================================================*/
/* Driver local functions. */
/*===========================================================================*/
/*===========================================================================*/
/* Driver interrupt handlers. */
/*===========================================================================*/
/*===========================================================================*/
/* Driver exported functions. */
/*===========================================================================*/
/**
* @brief Low level MII driver initialization.
*
* @notapi
*/
void miiInit(void) {
}
/**
* @brief Resets a PHY device.
*
* @param[in] macp pointer to the @p MACDriver object
*
* @notapi
*/
void miiReset(MACDriver *macp) {
(void)macp;
/*
* Disables the pullups on all the pins that are latched on reset by the PHY.
*/
AT91C_BASE_PIOB->PIO_PPUDR = PHY_LATCHED_PINS;
#ifdef PIOB_PHY_PD_MASK
/*
* PHY power control.
*/
AT91C_BASE_PIOB->PIO_OER = PIOB_PHY_PD_MASK; // Becomes an output.
AT91C_BASE_PIOB->PIO_PPUDR = PIOB_PHY_PD_MASK; // Default pullup disabled.
#if (PHY_HARDWARE == PHY_DAVICOM_9161)
AT91C_BASE_PIOB->PIO_CODR = PIOB_PHY_PD_MASK; // Output to low level.
#else
AT91C_BASE_PIOB->PIO_SODR = PIOB_PHY_PD_MASK; // Output to high level.
#endif
#endif // PIOB_PHY_PD_MASK
/*
* PHY reset by pulsing the NRST pin.
*/
AT91C_BASE_RSTC->RSTC_RMR = 0xA5000100;
AT91C_BASE_RSTC->RSTC_RCR = 0xA5000000 | AT91C_RSTC_EXTRST;
while (!(AT91C_BASE_RSTC->RSTC_RSR & AT91C_RSTC_NRSTL))
;
}
/**
* @brief Reads a PHY register through the MII interface.
*
* @param[in] macp pointer to the @p MACDriver object
* @param[in] addr the register address
* @return The register value.
*
* @notapi
*/
phyreg_t miiGet(MACDriver *macp, phyaddr_t addr) {
(void)macp;
AT91C_BASE_EMAC->EMAC_MAN = (0b01 << 30) | /* SOF */
(0b10 << 28) | /* RW */
(PHY_ADDRESS << 23) | /* PHYA */
(addr << 18) | /* REGA */
(0b10 << 16); /* CODE */
while (!( AT91C_BASE_EMAC->EMAC_NSR & AT91C_EMAC_IDLE))
;
return (phyreg_t)(AT91C_BASE_EMAC->EMAC_MAN & 0xFFFF);
}
/**
* @brief Writes a PHY register through the MII interface.
*
* @param[in] macp pointer to the @p MACDriver object
* @param[in] addr the register address
* @param[in] value the new register value
*
* @notapi
*/
void miiPut(MACDriver *macp, phyaddr_t addr, phyreg_t value) {
(void)macp;
AT91C_BASE_EMAC->EMAC_MAN = (0b01 << 30) | /* SOF */
(0b01 << 28) | /* RW */
(PHY_ADDRESS << 23) | /* PHYA */
(addr << 18) | /* REGA */
(0b10 << 16) | /* CODE */
value;
while (!( AT91C_BASE_EMAC->EMAC_NSR & AT91C_EMAC_IDLE))
;
}
#endif /* CH_HAL_USE_MAC */
/** @} */