116 lines
3.7 KiB
C
116 lines
3.7 KiB
C
/*
|
|
ChibiOS/RT - Copyright (C) 2006-2007 Giovanni Di Sirio.
|
|
|
|
This file is part of ChibiOS/RT.
|
|
|
|
ChibiOS/RT is free software; you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation; either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
ChibiOS/RT is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
/**
|
|
* @file MSP430/pal_lld.c
|
|
* @brief MSP430 Digital I/O low level driver code
|
|
* @addtogroup MSP430_PAL
|
|
* @{
|
|
*/
|
|
|
|
#include <ch.h>
|
|
#include <pal.h>
|
|
|
|
/**
|
|
* @brief MSP430 I/O ports configuration.
|
|
*
|
|
* @param[in] config the MSP430 ports configuration
|
|
*
|
|
* @note The @p PxIFG, @p PxIE and @p PxSEL registers are cleared. @p PxOUT
|
|
* and @p PxDIR are configured as specified.
|
|
*/
|
|
void _pal_lld_init(const MSP430DIOConfig *config) {
|
|
|
|
#if defined(__MSP430_HAS_PORT1__) || defined(__MSP430_HAS_PORT1_R__)
|
|
IOPORT_A->iop_full.ie.reg_p = 0;
|
|
IOPORT_A->iop_full.ifg.reg_p = 0;
|
|
IOPORT_A->iop_full.sel.reg_p = 0;
|
|
IOPORT_A->iop_common.out = config->P1Data.out;
|
|
IOPORT_A->iop_common.dir = config->P1Data.dir;
|
|
#endif
|
|
|
|
#if defined(__MSP430_HAS_PORT2__) || defined(__MSP430_HAS_PORT2_R__)
|
|
IOPORT_B->iop_full.ie.reg_p = 0;
|
|
IOPORT_B->iop_full.ifg.reg_p = 0;
|
|
IOPORT_B->iop_full.sel.reg_p = 0;
|
|
IOPORT_B->iop_common.out = config->P2Data.out;
|
|
IOPORT_B->iop_common.dir = config->P2Data.dir;
|
|
#endif
|
|
|
|
#if defined(__MSP430_HAS_PORT3__) || defined(__MSP430_HAS_PORT3_R__)
|
|
IOPORT_C->iop_simple.sel.reg_p = 0;
|
|
IOPORT_C->iop_common.out = config->P3Data.out;
|
|
IOPORT_C->iop_common.dir = config->P3Data.dir;
|
|
#endif
|
|
|
|
#if defined(__MSP430_HAS_PORT4__) || defined(__MSP430_HAS_PORT4_R__)
|
|
IOPORT_D->iop_simple.sel.reg_p = 0;
|
|
IOPORT_D->iop_common.out = config->P4Data.out;
|
|
IOPORT_D->iop_common.dir = config->P4Data.dir;
|
|
#endif
|
|
|
|
#if defined(__MSP430_HAS_PORT5__) || defined(__MSP430_HAS_PORT5_R__)
|
|
IOPORT_E->iop_simple.sel.reg_p = 0;
|
|
IOPORT_E->iop_common.out = config->P5Data.out;
|
|
IOPORT_E->iop_common.dir = config->P5Data.dir;
|
|
#endif
|
|
|
|
#if defined(__MSP430_HAS_PORT6__) || defined(__MSP430_HAS_PORT6_R__)
|
|
IOPORT_F->iop_simple.sel.reg_p = 0;
|
|
IOPORT_F->iop_common.out = config->P6Data.out;
|
|
IOPORT_F->iop_common.dir = config->P6Data.dir;
|
|
#endif
|
|
}
|
|
|
|
/**
|
|
* @brief Pads mode setup.
|
|
* @details This function programs a pads group belonging to the same port
|
|
* with the specified mode.
|
|
*
|
|
* @param[in] port the port identifier
|
|
* @param[in] mask the group mask
|
|
* @param[in] mode the mode
|
|
*
|
|
* @note This function is not meant to be invoked directly by the application
|
|
* code.
|
|
* @note @p PAL_MODE_UNCONNECTED is implemented as output as recommended by
|
|
* the MSP430x1xx Family User's Guide. Unconnected pads are set to
|
|
* high logic state by default.
|
|
* @note This function does not alter the @p PxSEL registers. Alternate
|
|
* functions setup must be handled by device-specific code.
|
|
*/
|
|
void _pal_lld_setgroupmode(ioportid_t port,
|
|
ioportmask_t mask,
|
|
uint_fast8_t mode) {
|
|
|
|
switch (mode) {
|
|
case PAL_MODE_RESET:
|
|
case PAL_MODE_INPUT:
|
|
port->iop_common.dir.reg_p &= ~mask;
|
|
break;
|
|
case PAL_MODE_UNCONNECTED:
|
|
port->iop_common.out.reg_p |= mask;
|
|
case PAL_MODE_OUTPUT_PUSHPULL:
|
|
port->iop_common.dir.reg_p |= mask;
|
|
break;
|
|
}
|
|
}
|
|
|
|
/** @} */
|