zcy
/
tinySA
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
tinySA/os/hal/platforms/STM32/serial_lld.c

653 lines
16 KiB
C
Raw Blame History

/*
ChibiOS/RT - Copyright (C) 2006,2007,2008,2009,2010,
2011,2012 Giovanni Di Sirio.
This file is part of ChibiOS/RT.
ChibiOS/RT is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
ChibiOS/RT is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
/**
* @file STM32/serial_lld.c
* @brief STM32 low level serial driver code.
*
* @addtogroup SERIAL
* @{
*/
#include "ch.h"
#include "hal.h"
#if HAL_USE_SERIAL || defined(__DOXYGEN__)
/*===========================================================================*/
/* Driver exported variables. */
/*===========================================================================*/
/** @brief USART1 serial driver identifier.*/
#if STM32_SERIAL_USE_USART1 || defined(__DOXYGEN__)
SerialDriver SD1;
#endif
/** @brief USART2 serial driver identifier.*/
#if STM32_SERIAL_USE_USART2 || defined(__DOXYGEN__)
SerialDriver SD2;
#endif
/** @brief USART3 serial driver identifier.*/
#if STM32_SERIAL_USE_USART3 || defined(__DOXYGEN__)
SerialDriver SD3;
#endif
/** @brief UART4 serial driver identifier.*/
#if STM32_SERIAL_USE_UART4 || defined(__DOXYGEN__)
SerialDriver SD4;
#endif
/** @brief UART5 serial driver identifier.*/
#if STM32_SERIAL_USE_UART5 || defined(__DOXYGEN__)
SerialDriver SD5;
#endif
/** @brief USART6 serial driver identifier.*/
#if STM32_SERIAL_USE_USART6 || defined(__DOXYGEN__)
SerialDriver SD6;
#endif
/*===========================================================================*/
/* Driver local variables. */
/*===========================================================================*/
/** @brief Driver default configuration.*/
static const SerialConfig default_config =
{
SERIAL_DEFAULT_BITRATE,
0,
USART_CR2_STOP1_BITS | USART_CR2_LINEN,
0
};
/*===========================================================================*/
/* Driver local functions. */
/*===========================================================================*/
/* Local functions have different implementations depending on the USART type,
STM32F0xx devices and newer have an enhanced peripheral with slightly
different register interface.*/
#if defined(STM32F0XX)
/**
* @brief USART initialization.
* @details This function must be invoked with interrupts disabled.
*
* @param[in] sdp pointer to a @p SerialDriver object
* @param[in] config the architecture-dependent serial driver configuration
*/
static void usart_init(SerialDriver *sdp, const SerialConfig *config) {
USART_TypeDef *u = sdp->usart;
/* Baud rate setting.*/
if (sdp->usart == USART1)
u->BRR = STM32_USART1CLK / config->sc_speed;
else
u->BRR = STM32_PCLK / config->sc_speed;
/* Note that some bits are enforced.*/
u->CR1 = config->sc_cr1 | USART_CR1_UE | USART_CR1_PEIE |
USART_CR1_RXNEIE | USART_CR1_TE |
USART_CR1_RE;
u->CR2 = config->sc_cr2 | USART_CR2_LBDIE;
u->CR3 = config->sc_cr3 | USART_CR3_EIE;
u->ICR = 0xFFFFFFFF;
}
/**
* @brief USART de-initialization.
* @details This function must be invoked with interrupts disabled.
*
* @param[in] u pointer to an USART I/O block
*/
static void usart_deinit(USART_TypeDef *u) {
u->CR1 = 0;
u->CR2 = 0;
u->CR3 = 0;
}
/**
* @brief Error handling routine.
*
* @param[in] sdp pointer to a @p SerialDriver object
* @param[in] isr USART ISR register value
*/
static void set_error(SerialDriver *sdp, uint16_t isr) {
chnflags_t sts = 0;
if (isr & USART_ISR_ORE)
sts |= SD_OVERRUN_ERROR;
if (isr & USART_ISR_PE)
sts |= SD_PARITY_ERROR;
if (isr & USART_ISR_FE)
sts |= SD_FRAMING_ERROR;
if (isr & USART_ISR_NE)
sts |= SD_NOISE_ERROR;
chSysLockFromIsr();
chnAddFlagsI(sdp, sts);
chSysUnlockFromIsr();
}
/**
* @brief Common IRQ handler.
*
* @param[in] sdp communication channel associated to the USART
*/
static void serve_interrupt(SerialDriver *sdp) {
USART_TypeDef *u = sdp->usart;
uint16_t cr1 = u->CR1;
uint16_t isr;
/* Reading and clearing status.*/
isr = u->ISR;
u->ICR = isr;
/* Error condition detection.*/
if (isr & (USART_ISR_ORE | USART_ISR_NE | USART_ISR_FE | USART_ISR_PE))
set_error(sdp, isr);
/* Special case, LIN break detection.*/
if (isr & USART_ISR_LBD) {
chSysLockFromIsr();
chnAddFlagsI(sdp, SD_BREAK_DETECTED);
chSysUnlockFromIsr();
}
/* Data available.*/
if (isr & USART_ISR_RXNE) {
chSysLockFromIsr();
sdIncomingDataI(sdp, (uint8_t)u->RDR);
chSysUnlockFromIsr();
}
/* Transmission buffer empty.*/
if ((cr1 & USART_CR1_TXEIE) && (isr & USART_ISR_TXE)) {
msg_t b;
chSysLockFromIsr();
b = chOQGetI(&sdp->oqueue);
if (b < Q_OK) {
chnAddFlagsI(sdp, CHN_OUTPUT_EMPTY);
u->CR1 = (cr1 & ~USART_CR1_TXEIE) | USART_CR1_TCIE;
}
else
u->TDR = b;
chSysUnlockFromIsr();
}
/* Physical transmission end.*/
if (isr & USART_ISR_TC) {
chSysLockFromIsr();
chnAddFlagsI(sdp, CHN_TRANSMISSION_END);
chSysUnlockFromIsr();
u->CR1 = cr1 & ~USART_CR1_TCIE;
}
}
#else /* !defined(STM32F0XX) */
/**
* @brief USART initialization.
* @details This function must be invoked with interrupts disabled.
*
* @param[in] sdp pointer to a @p SerialDriver object
* @param[in] config the architecture-dependent serial driver configuration
*/
static void usart_init(SerialDriver *sdp, const SerialConfig *config) {
USART_TypeDef *u = sdp->usart;
/* Baud rate setting.*/
#if STM32_HAS_USART6
if ((sdp->usart == USART1) || (sdp->usart == USART6))
#else
if (sdp->usart == USART1)
#endif
u->BRR = STM32_PCLK2 / config->sc_speed;
else
u->BRR = STM32_PCLK1 / config->sc_speed;
/* Note that some bits are enforced.*/
u->CR1 = config->sc_cr1 | USART_CR1_UE | USART_CR1_PEIE |
USART_CR1_RXNEIE | USART_CR1_TE |
USART_CR1_RE;
u->CR2 = config->sc_cr2 | USART_CR2_LBDIE;
u->CR3 = config->sc_cr3 | USART_CR3_EIE;
u->SR = 0;
(void)u->SR; /* SR reset step 1.*/
(void)u->DR; /* SR reset step 2.*/
}
/**
* @brief USART de-initialization.
* @details This function must be invoked with interrupts disabled.
*
* @param[in] u pointer to an USART I/O block
*/
static void usart_deinit(USART_TypeDef *u) {
u->CR1 = 0;
u->CR2 = 0;
u->CR3 = 0;
}
/**
* @brief Error handling routine.
*
* @param[in] sdp pointer to a @p SerialDriver object
* @param[in] sr USART SR register value
*/
static void set_error(SerialDriver *sdp, uint16_t sr) {
chnflags_t sts = 0;
if (sr & USART_SR_ORE)
sts |= SD_OVERRUN_ERROR;
if (sr & USART_SR_PE)
sts |= SD_PARITY_ERROR;
if (sr & USART_SR_FE)
sts |= SD_FRAMING_ERROR;
if (sr & USART_SR_NE)
sts |= SD_NOISE_ERROR;
chSysLockFromIsr();
chnAddFlagsI(sdp, sts);
chSysUnlockFromIsr();
}
/**
* @brief Common IRQ handler.
*
* @param[in] sdp communication channel associated to the USART
*/
static void serve_interrupt(SerialDriver *sdp) {
USART_TypeDef *u = sdp->usart;
uint16_t cr1 = u->CR1;
uint16_t sr = u->SR; /* SR reset step 1.*/
uint16_t dr = u->DR; /* SR reset step 2.*/
/* Error condition detection.*/
if (sr & (USART_SR_ORE | USART_SR_NE | USART_SR_FE | USART_SR_PE))
set_error(sdp, sr);
/* Special case, LIN break detection.*/
if (sr & USART_SR_LBD) {
chSysLockFromIsr();
chnAddFlagsI(sdp, SD_BREAK_DETECTED);
chSysUnlockFromIsr();
u->SR &= ~USART_SR_LBD;
}
/* Data available.*/
if (sr & USART_SR_RXNE) {
chSysLockFromIsr();
sdIncomingDataI(sdp, (uint8_t)dr);
chSysUnlockFromIsr();
}
/* Transmission buffer empty.*/
if ((cr1 & USART_CR1_TXEIE) && (sr & USART_SR_TXE)) {
msg_t b;
chSysLockFromIsr();
b = chOQGetI(&sdp->oqueue);
if (b < Q_OK) {
chnAddFlagsI(sdp, CHN_OUTPUT_EMPTY);
u->CR1 = (cr1 & ~USART_CR1_TXEIE) | USART_CR1_TCIE;
}
else
u->DR = b;
chSysUnlockFromIsr();
}
/* Physical transmission end.*/
if (sr & USART_SR_TC) {
chSysLockFromIsr();
chnAddFlagsI(sdp, CHN_TRANSMISSION_END);
chSysUnlockFromIsr();
u->CR1 = cr1 & ~USART_CR1_TCIE;
u->SR &= ~USART_SR_TC;
}
}
#endif /* !defined(STM32F0XX) */
#if STM32_SERIAL_USE_USART1 || defined(__DOXYGEN__)
static void notify1(GenericQueue *qp) {
(void)qp;
USART1->CR1 |= USART_CR1_TXEIE;
}
#endif
#if STM32_SERIAL_USE_USART2 || defined(__DOXYGEN__)
static void notify2(GenericQueue *qp) {
(void)qp;
USART2->CR1 |= USART_CR1_TXEIE;
}
#endif
#if STM32_SERIAL_USE_USART3 || defined(__DOXYGEN__)
static void notify3(GenericQueue *qp) {
(void)qp;
USART3->CR1 |= USART_CR1_TXEIE;
}
#endif
#if STM32_SERIAL_USE_UART4 || defined(__DOXYGEN__)
static void notify4(GenericQueue *qp) {
(void)qp;
UART4->CR1 |= USART_CR1_TXEIE;
}
#endif
#if STM32_SERIAL_USE_UART5 || defined(__DOXYGEN__)
static void notify5(GenericQueue *qp) {
(void)qp;
UART5->CR1 |= USART_CR1_TXEIE;
}
#endif
#if STM32_SERIAL_USE_USART6 || defined(__DOXYGEN__)
static void notify6(GenericQueue *qp) {
(void)qp;
USART6->CR1 |= USART_CR1_TXEIE;
}
#endif
/*===========================================================================*/
/* Driver interrupt handlers. */
/*===========================================================================*/
#if STM32_SERIAL_USE_USART1 || defined(__DOXYGEN__)
#if !defined(STM32_USART1_HANDLER)
#error "STM32_USART1_HANDLER not defined"
#endif
/**
* @brief USART1 interrupt handler.
*
* @isr
*/
CH_IRQ_HANDLER(STM32_USART1_HANDLER) {
CH_IRQ_PROLOGUE();
serve_interrupt(&SD1);
CH_IRQ_EPILOGUE();
}
#endif
#if STM32_SERIAL_USE_USART2 || defined(__DOXYGEN__)
#if !defined(STM32_USART2_HANDLER)
#error "STM32_USART2_HANDLER not defined"
#endif
/**
* @brief USART2 interrupt handler.
*
* @isr
*/
CH_IRQ_HANDLER(STM32_USART2_HANDLER) {
CH_IRQ_PROLOGUE();
serve_interrupt(&SD2);
CH_IRQ_EPILOGUE();
}
#endif
#if STM32_SERIAL_USE_USART3 || defined(__DOXYGEN__)
#if !defined(STM32_USART3_HANDLER)
#error "STM32_USART3_HANDLER not defined"
#endif
/**
* @brief USART3 interrupt handler.
*
* @isr
*/
CH_IRQ_HANDLER(STM32_USART3_HANDLER) {
CH_IRQ_PROLOGUE();
serve_interrupt(&SD3);
CH_IRQ_EPILOGUE();
}
#endif
#if STM32_SERIAL_USE_UART4 || defined(__DOXYGEN__)
#if !defined(STM32_UART4_HANDLER)
#error "STM32_UART4_HANDLER not defined"
#endif
/**
* @brief UART4 interrupt handler.
*
* @isr
*/
CH_IRQ_HANDLER(STM32_UART4_HANDLER) {
CH_IRQ_PROLOGUE();
serve_interrupt(&SD4);
CH_IRQ_EPILOGUE();
}
#endif
#if STM32_SERIAL_USE_UART5 || defined(__DOXYGEN__)
#if !defined(STM32_UART5_HANDLER)
#error "STM32_UART5_HANDLER not defined"
#endif
/**
* @brief UART5 interrupt handler.
*
* @isr
*/
CH_IRQ_HANDLER(STM32_UART5_HANDLER) {
CH_IRQ_PROLOGUE();
serve_interrupt(&SD5);
CH_IRQ_EPILOGUE();
}
#endif
#if STM32_SERIAL_USE_USART6 || defined(__DOXYGEN__)
#if !defined(STM32_USART6_HANDLER)
#error "STM32_USART6_HANDLER not defined"
#endif
/**
* @brief USART1 interrupt handler.
*
* @isr
*/
CH_IRQ_HANDLER(STM32_USART6_HANDLER) {
CH_IRQ_PROLOGUE();
serve_interrupt(&SD6);
CH_IRQ_EPILOGUE();
}
#endif
/*===========================================================================*/
/* Driver exported functions. */
/*===========================================================================*/
/**
* @brief Low level serial driver initialization.
*
* @notapi
*/
void sd_lld_init(void) {
#if STM32_SERIAL_USE_USART1
sdObjectInit(&SD1, NULL, notify1);
SD1.usart = USART1;
#endif
#if STM32_SERIAL_USE_USART2
sdObjectInit(&SD2, NULL, notify2);
SD2.usart = USART2;
#endif
#if STM32_SERIAL_USE_USART3
sdObjectInit(&SD3, NULL, notify3);
SD3.usart = USART3;
#endif
#if STM32_SERIAL_USE_UART4
sdObjectInit(&SD4, NULL, notify4);
SD4.usart = UART4;
#endif
#if STM32_SERIAL_USE_UART5
sdObjectInit(&SD5, NULL, notify5);
SD5.usart = UART5;
#endif
#if STM32_SERIAL_USE_USART6
sdObjectInit(&SD6, NULL, notify6);
SD6.usart = USART6;
#endif
}
/**
* @brief Low level serial driver configuration and (re)start.
*
* @param[in] sdp pointer to a @p SerialDriver object
* @param[in] config the architecture-dependent serial driver configuration.
* If this parameter is set to @p NULL then a default
* configuration is used.
*
* @notapi
*/
void sd_lld_start(SerialDriver *sdp, const SerialConfig *config) {
if (config == NULL)
config = &default_config;
if (sdp->state == SD_STOP) {
#if STM32_SERIAL_USE_USART1
if (&SD1 == sdp) {
rccEnableUSART1(FALSE);
nvicEnableVector(STM32_USART1_NUMBER,
CORTEX_PRIORITY_MASK(STM32_SERIAL_USART1_PRIORITY));
}
#endif
#if STM32_SERIAL_USE_USART2
if (&SD2 == sdp) {
rccEnableUSART2(FALSE);
nvicEnableVector(STM32_USART2_NUMBER,
CORTEX_PRIORITY_MASK(STM32_SERIAL_USART2_PRIORITY));
}
#endif
#if STM32_SERIAL_USE_USART3
if (&SD3 == sdp) {
rccEnableUSART3(FALSE);
nvicEnableVector(STM32_USART3_NUMBER,
CORTEX_PRIORITY_MASK(STM32_SERIAL_USART3_PRIORITY));
}
#endif
#if STM32_SERIAL_USE_UART4
if (&SD4 == sdp) {
rccEnableUART4(FALSE);
nvicEnableVector(STM32_UART4_NUMBER,
CORTEX_PRIORITY_MASK(STM32_SERIAL_UART4_PRIORITY));
}
#endif
#if STM32_SERIAL_USE_UART5
if (&SD5 == sdp) {
rccEnableUART5(FALSE);
nvicEnableVector(STM32_UART5_NUMBER,
CORTEX_PRIORITY_MASK(STM32_SERIAL_UART5_PRIORITY));
}
#endif
#if STM32_SERIAL_USE_USART6
if (&SD6 == sdp) {
rccEnableUSART6(FALSE);
nvicEnableVector(STM32_USART6_NUMBER,
CORTEX_PRIORITY_MASK(STM32_SERIAL_USART6_PRIORITY));
}
#endif
}
usart_init(sdp, config);
}
/**
* @brief Low level serial driver stop.
* @details De-initializes the USART, stops the associated clock, resets the
* interrupt vector.
*
* @param[in] sdp pointer to a @p SerialDriver object
*
* @notapi
*/
void sd_lld_stop(SerialDriver *sdp) {
if (sdp->state == SD_READY) {
usart_deinit(sdp->usart);
#if STM32_SERIAL_USE_USART1
if (&SD1 == sdp) {
rccDisableUSART1(FALSE);
nvicDisableVector(STM32_USART1_NUMBER);
return;
}
#endif
#if STM32_SERIAL_USE_USART2
if (&SD2 == sdp) {
rccDisableUSART2(FALSE);
nvicDisableVector(STM32_USART2_NUMBER);
return;
}
#endif
#if STM32_SERIAL_USE_USART3
if (&SD3 == sdp) {
rccDisableUSART3(FALSE);
nvicDisableVector(STM32_USART3_NUMBER);
return;
}
#endif
#if STM32_SERIAL_USE_UART4
if (&SD4 == sdp) {
rccDisableUART4(FALSE);
nvicDisableVector(STM32_UART4_NUMBER);
return;
}
#endif
#if STM32_SERIAL_USE_UART5
if (&SD5 == sdp) {
rccDisableUART5(FALSE);
nvicDisableVector(STM32_UART5_NUMBER);
return;
}
#endif
#if STM32_SERIAL_USE_USART6
if (&SD6 == sdp) {
rccDisableUSART6(FALSE);
nvicDisableVector(STM32_USART6_NUMBER);
return;
}
#endif
}
}
#endif /* HAL_USE_SERIAL */
/** @} */
Reference in New Issue View Git Blame Copy Permalink