185 lines
6.5 KiB
C
185 lines
6.5 KiB
C
/*
|
|
ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
|
|
|
|
Licensed under the Apache License, Version 2.0 (the "License");
|
|
you may not use this file except in compliance with the License.
|
|
You may obtain a copy of the License at
|
|
|
|
http://www.apache.org/licenses/LICENSE-2.0
|
|
|
|
Unless required by applicable law or agreed to in writing, software
|
|
distributed under the License is distributed on an "AS IS" BASIS,
|
|
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
See the License for the specific language governing permissions and
|
|
limitations under the License.
|
|
*/
|
|
|
|
/**
|
|
* @file STM32/GPIOv1/pal_lld.c
|
|
* @brief STM32F1xx GPIO low level driver code.
|
|
*
|
|
* @addtogroup PAL
|
|
* @{
|
|
*/
|
|
|
|
#include "ch.h"
|
|
#include "hal.h"
|
|
|
|
#if HAL_USE_PAL || defined(__DOXYGEN__)
|
|
|
|
/*===========================================================================*/
|
|
/* Driver local definitions. */
|
|
/*===========================================================================*/
|
|
|
|
#if STM32_HAS_GPIOG
|
|
#define APB2_EN_MASK (RCC_APB2ENR_IOPAEN | RCC_APB2ENR_IOPBEN | \
|
|
RCC_APB2ENR_IOPCEN | RCC_APB2ENR_IOPDEN | \
|
|
RCC_APB2ENR_IOPEEN | RCC_APB2ENR_IOPFEN | \
|
|
RCC_APB2ENR_IOPGEN | RCC_APB2ENR_AFIOEN)
|
|
#elif STM32_HAS_GPIOE
|
|
#define APB2_EN_MASK (RCC_APB2ENR_IOPAEN | RCC_APB2ENR_IOPBEN | \
|
|
RCC_APB2ENR_IOPCEN | RCC_APB2ENR_IOPDEN | \
|
|
RCC_APB2ENR_IOPEEN | RCC_APB2ENR_AFIOEN)
|
|
#else
|
|
#define APB2_EN_MASK (RCC_APB2ENR_IOPAEN | RCC_APB2ENR_IOPBEN | \
|
|
RCC_APB2ENR_IOPCEN | RCC_APB2ENR_IOPDEN | \
|
|
RCC_APB2ENR_AFIOEN)
|
|
#endif
|
|
|
|
/*===========================================================================*/
|
|
/* Driver exported variables. */
|
|
/*===========================================================================*/
|
|
|
|
/*===========================================================================*/
|
|
/* Driver local variables and types. */
|
|
/*===========================================================================*/
|
|
|
|
/*===========================================================================*/
|
|
/* Driver local functions. */
|
|
/*===========================================================================*/
|
|
|
|
/*===========================================================================*/
|
|
/* Driver interrupt handlers. */
|
|
/*===========================================================================*/
|
|
|
|
/*===========================================================================*/
|
|
/* Driver exported functions. */
|
|
/*===========================================================================*/
|
|
|
|
/**
|
|
* @brief STM32 I/O ports configuration.
|
|
* @details Ports A-D(E, F, G) clocks enabled, AFIO clock enabled.
|
|
*
|
|
* @param[in] config the STM32 ports configuration
|
|
*
|
|
* @notapi
|
|
*/
|
|
void _pal_lld_init(const PALConfig *config) {
|
|
|
|
/*
|
|
* Enables the GPIO related clocks.
|
|
*/
|
|
rccEnableAPB2(APB2_EN_MASK, FALSE);
|
|
|
|
/*
|
|
* Initial GPIO setup.
|
|
*/
|
|
GPIOA->ODR = config->PAData.odr;
|
|
GPIOA->CRH = config->PAData.crh;
|
|
GPIOA->CRL = config->PAData.crl;
|
|
GPIOB->ODR = config->PBData.odr;
|
|
GPIOB->CRH = config->PBData.crh;
|
|
GPIOB->CRL = config->PBData.crl;
|
|
GPIOC->ODR = config->PCData.odr;
|
|
GPIOC->CRH = config->PCData.crh;
|
|
GPIOC->CRL = config->PCData.crl;
|
|
GPIOD->ODR = config->PDData.odr;
|
|
GPIOD->CRH = config->PDData.crh;
|
|
GPIOD->CRL = config->PDData.crl;
|
|
#if STM32_HAS_GPIOE || defined(__DOXYGEN__)
|
|
GPIOE->ODR = config->PEData.odr;
|
|
GPIOE->CRH = config->PEData.crh;
|
|
GPIOE->CRL = config->PEData.crl;
|
|
#if STM32_HAS_GPIOF || defined(__DOXYGEN__)
|
|
GPIOF->ODR = config->PFData.odr;
|
|
GPIOF->CRH = config->PFData.crh;
|
|
GPIOF->CRL = config->PFData.crl;
|
|
#if STM32_HAS_GPIOG || defined(__DOXYGEN__)
|
|
GPIOG->ODR = config->PGData.odr;
|
|
GPIOG->CRH = config->PGData.crh;
|
|
GPIOG->CRL = config->PGData.crl;
|
|
#endif
|
|
#endif
|
|
#endif
|
|
}
|
|
|
|
/**
|
|
* @brief Pads mode setup.
|
|
* @details This function programs a pads group belonging to the same port
|
|
* with the specified mode.
|
|
* @note @p PAL_MODE_UNCONNECTED is implemented as push pull output at 2MHz.
|
|
* @note Writing on pads programmed as pull-up or pull-down has the side
|
|
* effect to modify the resistor setting because the output latched
|
|
* data is used for the resistor selection.
|
|
*
|
|
* @param[in] port the port identifier
|
|
* @param[in] mask the group mask
|
|
* @param[in] mode the mode
|
|
*
|
|
* @notapi
|
|
*/
|
|
void _pal_lld_setgroupmode(ioportid_t port,
|
|
ioportmask_t mask,
|
|
iomode_t mode) {
|
|
static const uint8_t cfgtab[] = {
|
|
4, /* PAL_MODE_RESET, implemented as input.*/
|
|
2, /* PAL_MODE_UNCONNECTED, implemented as push pull output 2MHz.*/
|
|
4, /* PAL_MODE_INPUT */
|
|
8, /* PAL_MODE_INPUT_PULLUP */
|
|
8, /* PAL_MODE_INPUT_PULLDOWN */
|
|
0, /* PAL_MODE_INPUT_ANALOG */
|
|
3, /* PAL_MODE_OUTPUT_PUSHPULL, 50MHz.*/
|
|
7, /* PAL_MODE_OUTPUT_OPENDRAIN, 50MHz.*/
|
|
8, /* Reserved.*/
|
|
8, /* Reserved.*/
|
|
8, /* Reserved.*/
|
|
8, /* Reserved.*/
|
|
8, /* Reserved.*/
|
|
8, /* Reserved.*/
|
|
8, /* Reserved.*/
|
|
8, /* Reserved.*/
|
|
0xB, /* PAL_MODE_STM32_ALTERNATE_PUSHPULL, 50MHz.*/
|
|
0xF, /* PAL_MODE_STM32_ALTERNATE_OPENDRAIN, 50MHz.*/
|
|
};
|
|
uint32_t mh, ml, crh, crl, cfg;
|
|
unsigned i;
|
|
|
|
if (mode == PAL_MODE_INPUT_PULLUP)
|
|
port->BSRR = mask;
|
|
else if (mode == PAL_MODE_INPUT_PULLDOWN)
|
|
port->BRR = mask;
|
|
cfg = cfgtab[mode];
|
|
mh = ml = crh = crl = 0;
|
|
for (i = 0; i < 8; i++) {
|
|
ml <<= 4;
|
|
mh <<= 4;
|
|
crl <<= 4;
|
|
crh <<= 4;
|
|
if ((mask & 0x0080) == 0)
|
|
ml |= 0xf;
|
|
else
|
|
crl |= cfg;
|
|
if ((mask & 0x8000) == 0)
|
|
mh |= 0xf;
|
|
else
|
|
crh |= cfg;
|
|
mask <<= 1;
|
|
}
|
|
port->CRH = (port->CRH & mh) | crh;
|
|
port->CRL = (port->CRL & ml) | crl;
|
|
}
|
|
|
|
#endif /* HAL_USE_PAL */
|
|
|
|
/** @} */
|